Campania International Portwenn FT-214 User manual

F
T
-
2
14Portwenn
Fountain
R
evised
June15, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump
# 7 stopper(1)
Approx.6”length of½”BlackNon-Kinktubing(1)**
1”length of5/8”cleartubing (1)**
1”length of1/2"CPVCpipe(1)**
Wedges(2)
Hose clamps(2)*
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassebled
FOUNTAININFORMATION:
Thisfountain holdsapproximately3gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length

F
T
-
2
14Portwenn
Fountain
R
evised
June15, 2018
Assembleyourfountain onalevelsurface capableofholdingaminimumof325poundswith
anapproximate1square foot footprint.
FT-214B(268 lbs)
26.5”Lx26.5”Wx36.75”H
FT-214A(22 lbs)
13.75”Lx13.75”Wx5.75”H
1. Position thebasin (FT-214B) where thefountain
is to beinstalled, ensuringthatitislevel.
2. Assemblethepumpkit
a. NOTE:All pumps comewith 1adapter
alreadyinsertedintothepumpand 2
adapterssecuredtothepower cord.
i. Thisfountainusesthelargest
adapter provided.
b. Using ahoseclamp, attachthe1/2"non-
kinktubing to thepumpoutlet.
c. Place thestopper aroundthepumpcord
approximately6inchesfromthepump.
3. Feedthepumpcordthrough theholeinthe
basin(FT-214B) and outofthechannel.
4. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriver
orhammer works besttopressthestopper
in place.
5. Coilthepumpcordinthepumphouseandpush
thepumpdownasfarinto thepumphouseas
possible.
6. Holdingthewaterfeature(FT-214A)over the
basin(FT-214B), insertthe1/2"CPVCportion
ofthetubingassembly intothecoupling
protruding fromthebottom.
7. Place thewater feature(FT-214A)onto the
basin(FT-214B) ensuringthatitislevel.
a. Turnthefeatureandcoilthetubingas
you lower it into position.
8. Fillthefountainwithwater.