Campania International Paradiso FT-255 User manual

F
T
-
255
Paradiso
Fountain
R
evised
August7, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK120 pump (1)
#7 stopper(1)
6”length of1/2”blacknon-kinktubing(1)**
1”length of5/8”cleartubing (1)**
1”length of1/2"CPVCpipe(1)**
Hose clamps(1)*
Wedges(2)
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately1.5gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PES120 - 120GPH Pump
5FTcord length

F
T
-
255
Paradiso
Fountain
R
evised
August7, 2018
Assemble your fountainon alevel surface capable ofholding aminimumof106
poundswithanapproximate1squarefootfootprint.
FT-255B(59 lbs)
22.25”Wx15.5”H
FT-255A(6 lbs)
7.75”Wx4.5”H
FT-255C(3 lbs)
5.5”Wx2.5”H
1. Position thebasin(FT-255B) wherethefountain
istobeinstalled, ensuring that it islevel.
2. Assemble thepumpkit
a. Using ahoseclamp, attachthe1/2" non-
kink tubingtothepumpoutlet.
b. Place thestopper around thepumpcord
approximately6inchesfromthepump.
3. Feedthepumpcordthrough thehole inthebasin
(FT-255B) and outofthechannel.
4. FIRMLYpressthestopper intothehole evenly.
a. Note: Using thehandle ofascrewdriver or
hammerworksbesttopress thestopper in
place.
5. Place thepumpcover (FT-255A) over thepump.
6. InserttheCPVCend ofthetubing intothe
bottomofthewater feature(FT-255C).
7. Place thewaterfeatureintothebasinensuring
that it islevel.
a. Turnthefeatureandcoil thetubing asyou
lower it intoposition.
8. Fill thefountainwithwater.