Campania International FT-129 User manual

FT
-
129Portico
Wall Fountain
R
evised
December 4, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK80-Apump (1)
#7 stopper(1)
Approx.6”length of1/2”BlackNon-Kinktubing (1)**
2”length of5/8”cleartubing (1)**
Hose clamps(2)
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately1gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF75 - 75 GPH Pump
6
FTcord length

FT
-
129Portico
Wall Fountain
R
evised
December 4, 2017
Makesureyou areassembling your fountainon awall andusing ahangingmethod
that will sufficientlyholdaminimumof100pounds.
FT-129A(89 lbs)
16”L x11”Wx26.5H
1. Assemble thepumpkit
a. NOTE:All pumpscomewith1
adapter alreadyinsertedintothe
pumpand 2adapterssecured to
the power cord.
i. Thisfountain usesthe
largest adapter provided.
b. Using ahoseclamp, attachthe1/2”
non-kinktubing tothepumpoutlet.
c. Place thestopper around thepump
cordapproximately4”fromthe
pump.
2. Feedthepumpcordthrough thehole in
thebasinofthewater feature(FT-129A).
3. FIRMLY press thestopper intothehole
evenly.
a. Note: Using thehandle ofa
screwdriveror hammerworksbest
topress thestopper inplace.
4. Fit theclear end ofthetubing assembly
over thepipeprotruding inthebottomof
thebasin.
5. Hang thefountain.
6. Fill thebasinwithwater.
Hook Placement:
Positionofbackhooks:
Thereare3 hookspositioned on the back. The two atthe top areshaped like an upside downletterU, and are 5” from
top and 3.75” fromsides.The one atthe bottomisplaced like the letterU.Thisone ismeantto keep the backofthe
fountainfromsittingdirectlyagainstthe wall.
Please notethese are bestapproximation astheyare placed in mold byhand asconsistentlyaspossible.