Campania International FT-318 Kito User manual

F
T
-
31
8
Kito
Fountain
Revised
July17, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#10 stopper(1)
9”length of1/2”BlackNon-Kinktubing (1)**
2”length of5/8”clearvinyltubing (1)**
2”length of1/2"PVCpipe (1)**
Wedges(2)
Hose clamps(2)*
*Hoseclampsmaybe used as flow restrictor
**Tubing hasbeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately5gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length

F
T
-
31
8
Kito
Fountain
Revised
July17, 2018
Assemble your fountainon alevel surface capable ofholding aminimumof100
poundswithanapproximate1squarefootfootprint.
FT-318C(14 lbs)
13.25”Lx13.25”Wx3”H
FT-318B(53 lbs)
16.25”Lx16.25”Wx7.25”H
FT-318A(15 lbs)
13”Lx13”Wx1.25”H
1. Position thebase(FT-318C) wherethefountainisto
beinstalled, ensuring that it islevel.
2. Center thebasin(FT-318B) on thebase, ensuring that
it iscenteredand level.
3. Assemble thepumpkit
a. Connect thetubingtothepumpoutlet.
i. NOTE:All pumpscomewith2adapters.
1. Thisfountain usesthe medium
adapter provided.
b. Place thestopper around thepumpcord
approximately6”fromthepump.
4. Feedthepumpcordthrough thehole and channel in
thebasin(FT-318C).
5. FIRMLYpressthestopper intothehole evenly.
a. Note: Using thehandle ofascrewdriver or
hammerworksbesttopress thestopper inplace.
6. Holding thewaterfeature(FT-318A)over thebasin,
inserttheCPVCend ofthetubing assemblyintothe
coupling protrudingfromthebottom.
7. Carefullyplace water featureintothebasin(FT-318B)
ensuring that it iscenteredand level.
8. Fill thefountainwithwater.