Campania International Williamsburg Pineapple FT-145 User manual

F
T
-
145 WilliamsburgPineapple 2
-
Tier inBasinFountain
Professionalinstallation isrecommended forthisfountain!
R
evised
March31, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK800 pump (1)
#10 stopper (1)
Metal plug for hole inside of basin(1)
2” lengthof 3/4” Clear Vinyltubing (1) **
2” lengthof 5/8” Clear Vinyltubing (1) **
Approx. 36” lengthof 1/2” BlackNon-Kinktubing (1)**
Approx. 16” lengthof 1/2” BlackNon-Kinktubing (1)
Wedges(6)
Hose clamps(4)*
*Hoseclamps maybe used asflow restrictors
**Tubing is preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately130 gallonsof water.
Thisfountain usesamediumfountain cover but does
not cover the basin.
(FTNCOV-MED)
Compatible withRefill #10 Device and LEDkit
(A different style stopper mayberequestedfor therefillkit.)
TOOLSREQUIRED:
Bubble Level
Tape Measure
PUMPINFORMATION:
PP800 - 800GPH Pump
16 FTcord length

FT
-
145 WilliamsburgPineapple 2
-
Tier inBasin
Fountain
Professionalinstallation isrecommended forthisfountain! Assemble your fountain on a levelsurface using crushed stone, gravel, or cementpad asthe base.
RevisedMarch31,2017
FGB-2030 (130 lbs)
72”Wx11.75”H
FT-145F(50 lbs)
15.5”Wx9”H
FT-145E (90lbs)
14.75”Wx22.75”H
FT-145D (111 lbs)
30”Wx8.5”H
FT-145C(18 lbs)
7”Wx15.25”H
1. Placethefiberglass basinwherethefountainistobe installed.
a. Be sure tocheckthateachpartislevel and centeredduringthe
assembly ofthisfountain.
2. Spreada thinamount ofsiliconeonboth pumpcordsapproximately3feet
fromthepumpsandfitthemintothe double holedstopper.
3. Feedthepumpcordsthroughtheholeinthebasin.
4. Toensurea level installation,makesurethatyourun theremainingcord
throughthechannel inthe bottomofthebasin.
5. Press stopperfirmlyand evenlyintotheholeofbasin.
6. Spreada thinbeadofsiliconearoundthe perimeterofthestopper, slitin
thestopper,andaroundthepumpcords.
7. Looselywrapcordsupinthecenterofthe basin.
8. Placethefountainbase(FT-145F)overthepumpsandthecords.
9. Placethelargepedestal(FT-145E)on topofthe base.
10. Position thelargebowl (FT-145D) ontopofthelargepedestal(FT-145E).
11. Connect the 1/2"non-kinksideofthe 36”preassembledtubingtothe pipe
protrudingfromthebottomofthelargebowl (FT-145D).
12. Feedtheclearvinyltubingthrough the holeinthelargepedestal(FT-
145E).
13. Fit the tubingtothepumpwateroutlet onthepump.
14. Usingahoseclamp,securethe16”lengthofnon-kinktubingtothepipe
protrudinginsidethelargebowl(FT-145D).
15. Feedthenon-kinktubingthroughthe small pedestal(FT-145C).
16. Centerthesmall pedestal(FT-145C)insidethelargebowl (FT-145D).
FT-132B(20 lbs)
16.5”Wx4.5”H
FT-132A(3lbs)
3.75”Wx7”H
FT-145G (8lbs)
5.5”Lx2”Wx5”H
FT-145H (228 lbseach)
40.25”Lx9”Wx15.25”H
17. Usingahoseclamp,connecttheloose end ofthe non-kinktubingtothe
pipeprotrudingfromthe bottomofthesmall bowl (FT-145B).
18. Centerthesmall bowl(FT-145B)onthesmall pedestal(FT-145C)
19. Placethefinial(FT-132A)intothesmall bowl (FT-132B)byfittingthe
copperinthefinialoverthecopperinthe bowl.
20. Fit the pumpcoverdoor(FT-145G)intothepumpcover(FT-145F).
21. Position thecopings(FT-145H) inacircle about6inchesfromthebasin.
22. Carefullypusheachpieceoneattime towardthe basinandintothe notch
ofthecoping.
a. Fit eachpiecetothecopingnext toit.
23. Fill thebasinwithwater.