Campania International GF-8 1601 Series User manual

Revised March 2,2018
COMPONENTSAND PARTSLIST
GF
-
8XX
-
1601
Fountain
(3 pieces)
GF-813-1601R –Catinat JarFtn-Rnd Basin
GF-813-1601S– Catinat JarFtn-SqBasin
30”Lx30”Wx57.25”H
162 Lbs– Round
157 Lbs-Square
GF-820-1601R –Nico JarFtn-Rnd Basin
GF-820-1601S– Nico JarFtn-SqBasin
30”Lx30”Wx50.25”H
125 Lbs– Round
120 Lbs-Square
GF-811-1601R –Lago JarFtn-Rnd Basin
GF-811-1601S– Lago JarFtn-SqBasin
30”Lx30”Wx57.25”H
162 Lbs– Round
157 Lbs-Square
GF-812-1601R –Vega JarFtn-Rnd Basin
GF-812-1601S–Vega JarFtn-SqBasin
30”Lx30”Wx57.25”H
162 Lbs– Round
157 Lbs-Square
Detail oftop disc
Thisfountainuses
cover
FTNCOV-MED
Fountainholds
approximately5
gallonsofwater

Revised March 2,2018
COMPONENTSAND PARTSLIST
NOTE:Component
photos
arenottoscale
Toolsyou will need
Level
Pump KitPartsList
PK800 pump (1)
#10 Rubberstopper(1)
Approx.3”length of¾”clearvinyltubing (1)**
Approx.72”length of5/8”blacknon-kinktubing (1)**
**Tubing willbe preassembled
Hose clamps(1)
3”length of3/8”diametercopperpipe (1)
3/8”diametercoppercoupling (1)
2.8 oz. tube ofclearsilicone (2)
Wedges(2)
*Note– Hose clampsmaybe used forrestrictorflow
GF
-
8XX
-
1601 Fountain
(3 pieces)
LagoJar– 150811-1601
21.75”Diax47.25”H
121 Lbs
Catinat Jar–150813-1601
21.75”Diax47.25”H
121 Lbs
Nico Jar– 150820-1601
18”Dia x40.25”H
84 Lbs
Vega Jar– 150812-1601
21.75”Diax47.25”H
121 Lbs
LagoSaucer– 150811-1601D
10.75”Diax1.75”H
5 Lbs
Catinat Jar–150813-1601
10.75”Diax1.75”H
5 Lbs
Nico Jar– 150820-1601
10.75”Diax1.75”H
5 Lbs
Vega Jar– 150812-1601
10.75”Diax1.75”H
5 Lbs
Round Basin–Top view
FGB-2010
30”wx8”h
36 lbs
SquareBasin–Top view
FGB-1010
30”wx8”h
41 lbs
SideView
Basin
Pump
Stopper
5/8” tubing
3/4" tubing
BasinDisc
PumpCover
Pumpaccess
door
Stand Pipe

Revised March 2,2018
ASSEMBLYINSTRUCTIONS
1. Make sureyou areassemblingyourfountain on a levelsurface.
2. Thisfountainwill need to be installed on a surface capable ofholding a minimumof160 poundsin
approximatelya 5 (round basin)to 6 (square basin)square foot area.
3. Positionthebasin (FGB-1010 orFGB-2010)wherethefountain isto be installed, ensuring that it islevel.
4. Feed the pump cord through theholein the basinleaving enough cordlengthinside basin toworkwith the
pump outsideofthe pump cover.
5. To ensure a levelinstallation, bring the pump cord out through the channelin the bottomofthe basin.
6. Placethestopperaround the pump cord approximately8”-12”fromthe pump.
7. Press stopperfirmlyinto the holeofbasin.
8. Placethe3/8”coppercoupling overone end ofthe 3”length ofcopperpipe.
9. Feed the opposite endofthe pipe fromthe coupling down through theholein the saucer.
10.Placea bead ofsilicone aroundthecopperpipe on both sidesofthe saucerto make a watertightseal.
a. Use a wet papertowelto wipe awayanyexcess silicone on the top side ofthe saucer.
11.Insert theclear¾”end ofthe tubing assemblyonto the wateroutlet ofthepump.
12.Feed the 5/8”end ofthe tubing assemblyup throughthe holeinthepump coverand up through the bottomof
the jar.
13.Placethejaron top ofthe pump covermaking sure that itislevel.
a. Note –Wedgesmaybe used ifnecessaryto levelthejar.
14.Bring the hoseup to the top ofthe jarand securewith a piece oftape foreasyaccess.
a. Note – usea length ofstring to help bring the hoseup to the top ofthe jar.
15.Placethesauceron top ofthe jarto determine placement ofthe silicone.
16.Run abead ofsilicone around the top inside edge ofthe jar.
17.Placea hose clamp overthe end ofthe tubing.
18.Secure the tubing to the bottomofthe pipeinthesaucerand tighten the hose clamp.
19.Placethesaucerdownonto thesiliconeon the jarandpress firmly.
20.Use a wet papertowelto spread the silicone out between the jarand the saucer.Thisisto fill inanygaps
around the saucer. Usethewet papertowelto removeanyexcess silicone.
21.Allow24 hours to dry before operating fountain.
22.Fillbasinwith waterwith approximately5 gallonsof water.
a. Note – donotallow pump to run dryasitwillcausedamage to the pump.
-WINTERCARE-
Fountainbowls/topsandotherfountain components,which collectwater, shouldnot be left outside in the wintersince
anycomponent, which fillswith waterandfreezesmaycrack. Likewise componentssuch aspedestals,whichremain
in abasin, filled withwater,which thenfreezes, mayalso crackorcrumble. Ideally, therefore, a fountain should always
be storedindoors orina dryprotected place such asa covered porchawayfromthe elements. However,ifa fountain
must be left outside:
(1)Remove pump, rubberstoppers, drainpipes, finials,and othersmall componentsforstorage indoors. Note
that stoppers ordrainpipesare removed to allow drainage in the event wateraccumulatesin anybasin.
(2)Raisefountainbase fromground with wood stripsso that basewillnot freeze totheground surface.
(3)Coverorwrap thefountainwith burlap orotherabsorbent material(oldblanket ortowel)and then cover
securelywith plastic, making sure that waterwillnot accumulate in the basin orotherfountain component and freeze;
(4)Checkfountainperiodicallyto insure that plasticissecure and waterisnot accumulating in anyfountain
component. -GENERALFOUNTAINTIPS-
Installfountainson alevelsurface. You willneeda properlygrounded 110-volt (AC only)GFCI protectedreceptacle
nearthe fountain foryourpump. All pumpsare submersibleandmust be completelyunderwaterto function properly.
Test all pumpsand adjust to full output priortoassembly. It isnot recommended that fountainsbe placed directlyon
grass ordirt. Position the channelopening at the baseofeach fountaintoward the electricaloutletto be used since the
pump cord willbethreaded through thisopening.
Formore Campaniaproduct information visit www.campaniainternational.com
GF
-
8XX
-
1601 Fountain
(3 pieces)
Saucerfitsinside topedge of jar.