Campania International M-Series User manual

FT
-
170 M
-
Series Flores Fountain
Revised
October 18, 2019
PRODUCTINFORMATION
-WINTER CARE-
Fountainbowls/topsandotherfountaincomponents, whichcollect water, shouldnotbeleftoutsideinthewintersince any component,
whichfillswithwater and freezesmaycrack. Likewise, componentssuchaspedestals, whichremaininabasin, filledwithwater,
whichthenfreezes, mayalsocrackorcrumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfrom theelements. However, if afountainmustbeleftoutside:
(1) Removepump,rubber stoppers, drainpipes, finials, and other small componentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwateraccumulatesinany basin.
(2) Raisefountainbasefrom groundwithwoodstripssothat basewill notfreezetothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic, making surethat waterwill notaccumulate inthebasinor other fountaincomponentand freeze;
(4) Checkfountainperiodicallytoensurethat plastic issecure, andwater isnotaccumulating inany fountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. You will needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible and mustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyon grass or dirt. Position thechannel
openingat thebaseof eachfountaintowardtheelectrical outlet tobeusedsince thepump
cord will bethreadedthrough thisopening.
CheckoutYouTubefor a“Howto”video.
https://www.youtube.com/watch?v=_5mAnjH_IYY
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK120-LVpump (1)
#7 Seriesstopper(1)
2”length of PermaGum Putty(1)
Approx.6”length of1/2”Black Non-Kinktubing (1)***
Approx.1”length of5/8”cleartubing (1)***
1”length of 1/2"CPVCpipe(1)***
Adhesive Dots(4)
Hose clamps(1)**
** Hoseclampscanbe used asflowrestrictors.
*** Tubing has been preassembled(Quick Connect)
FOUNTAININFORMATION:
Thisfountain holdsapproximately1.5gallonsof water.
Afountain cover isnot available forthisfountain.
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
FlatHeadScrewdriver
Scissors
PUMP INFORMATION:
WP450LV–120GPH LowVoltagePump
16 FTcord length

FT
-
170 M
-
Series Flores Fountain
Revised
October 18, 2019
ASSEMBLYINSTRUCTIONS
Assembleyourfountain onalevelsurface capableofholdingaminimumof58pounds withan
approximate1/4square foot footprint.
FT-170B(30lbs)
16”Wx6.75”H
FT-170A(15 lbs)
13”Wx3”H
1. Place theadhesivedots provided evenly around thebottomofthebasin
(FT-170B)to preventscratching anything beneath thefountain.
2. Position thebasin (FT-170B)where thefountain is to beinstalled,
ensuring thatit will belevel.
3. Assemblethepump kit.
a. NOTE:Besure to usetheappropriate size
adapter providedwiththepumpanddo notplug
thepumpinto thetransformer until assembly is
complete.
b. Using ahoseclamp and screwdriver, attach the1/2”
end ofthenon-kink tubing to thepump outlet.
c. Place oneend ofthePermaGumputty onto thepump
cord approximately about6”-8”fromthepump.
d. Wrap theputty around thecord once. See image “A”
e. Place thestopper around theputty. Keep thetop edge
oftheputty and stopper flush. See image “B”
f. Cutoff theexcess putty so thatit is even with theouter edgeofthe
slit.
4. Feed thepump cord all theway through theholeand thechannelin the
basin (FT-170B)toensurethefountain will belevel.
5. Firmly press thestopper into theholewhilepulling the
cord theremainder oftheway.
a. Usethehandleofthescrewdriver to press the
stopper down as far as possible. See image “C”
6. Fill thebasin enough to cover thepump completely with water to check
forleaking.
a. If leaking occurs…
i. Removethestopper and repeatstep 5
again.
ii. Usesomeoftheexcess putty to sealthe
cord around thetop ofthestopper. See
image “D”
iii. Letthefountain dry completely, then use100%clear
siliconeto sealaround thepump cord and perimeter ofthe
stopper.
1. Siliconemustsetfor24 hours beforeadding water
7. Holding thewater feature(FT-170A) over thebasin (FT-170B), insert
theCPVCend ofthetubing into thecoupling protruding fromthe
bottom.
8. Center thewater feature (FT-170A)into basin (FT-170B).
9. Connectthepump cord to thetransformer.
A
B
C
D

CampaniaInternational-Fountain Guide
Set-up
Assembly &Installation
Afountain can bedifficult to install withoutknowing and understanding thesteps involved. To ensure your
fountain is installed properly, pleaseread ourinstructions and tips before you begin.
1. SeekProfessionalHelp: Check ifprofessionalinstallation is recommendedforyourfountain.
2. CheckFoundation: Placeyourfountain on alevelsurface.Itis recommended to place yourfountain on
concreteorahard packed gravelpad. If thebaseis levelbutsomecomponents seemoff,rotatecomponents
orusewedges to levelthem.
3. Createa DripLoop: To preventwater fromdripping down thecord and damaging theelectricalsocket,
createadrip loop by allowing thepump power cord to fall belowthewall outlet.
4. Usea GFCI Outlet: Useonly aGFCIoutletwhenrunning afountain.
Maintenance
PumpCare
Thefountain relies heavily on thequality ofthepump. Awell-maintainedpump can lastseveralyears.
1. Fully Submerge: Ensurethepump is fully submerged atall times to avoid damage.
2. Ensure Water LevelisSufficient: Check water levels regularlyas watermay evaporateovertime, and
periodically changewaterto avoid algae buildup.
3. CleanPump: Usesoap and water, orwhitevinegarand water, with asmall,softbrush to clean thepump of
debris, dirt, and algaebuildup. This should bedoneevery 2-3 months.
Surface Care
Paints and finishes may fadeover timedueto weathering. By following thesetips, you will beableto maintain
yourfountain’s surface.
1. ControlAlgaeand White Scale: Dueto waterevaporation, you may seewhiteresidueon yourfountain
surfacefromthemineralcontentin yourwatersupply. Algaecides and cleansers can help preventbuildup
thatoccurs fromminerals and hard water.
2. Protect and Refinish: Depending on thematerialofyourfountain, protectants and sprays may prolong the
appearanceofthesurface. Paintand refinishing kits can beusedfortouch-up.
Winter Care
Caststonecan expand and contractin differenttemperatures/humidity levels. If thetemperature falls below
32°Forhumidity levels changedrastically, followthesteps belowto protectyourfountain.
1. Bring Inside: If possible, bring youroutdoorfountain insideforthewinter.
2. Store inDry Location: If unableto bring inside, store yourfountain in adry and covered location.
3. Bring Components Inside: Moveall internalcomponents (stoppers, tubing, lights, pump, etc.)inside.
A pump can stayin a fountain for thewinter, butifyou chooseto leaveit in, it mustbecompletelydryand
insulated with plasticbags and towelto ensureit stays dry. However it is recommended to bring it inside.
4. Completely Drain: Itisimportantto preventwater fromaccumulating anywhere,as freezing and thawing
ofwater cancausepumpdamageand causecracksto formin yourfountain.Removethedrain plugs.
5. Elevate Fountain: Fountains may freeze to theground and causecracking in thebaseifleftoutsidein the
winter.Ifunableto store insideorin adry coveredlocation, try to raiseyourfountain aboveground.
6. Cover Fountain: Contactyourretailer to find therightsize cover foryourspecificfountain. There are four
differentsizes. Whencovering, makesurethefountain is tautso thatno snoworwatercan poolin the
cover. Pull thestring to tighten theopening ofthecover around thefountain.

Troubleshooting
PumpNotWorking
When operating thepump forthefirsttime, it cantakeafewminutes beforewater begins to flowproperly. Ifit
is still notworking after afew minutes, pleasefollowourtroubleshooting tips below.
Beforetroubleshooting, UNPLUG YOUR PUMP.
1. SubmergePump: Ensure yourpump is fully submerged in wateratall times to avoid pump damage.
2. ManualCheck: If thepump cover is removable,try removing thecoverto access theimpeller area.Turn
therotorto ensure it is notbroken orjammed.
PumpNoise
Somesound fromthepump may benormal, butyou can followthesetips to reduce sound orresolveabnormal
noises.
1. SubmergePump: Ensure yourpump is fully submerged atall times and clean ofdebris, dirtand algae
buildup.
2. CheckLocation: You may hear thevibration ofthepump touching thesidewalls ofthefountain. Make
sure thepump is only touching thebottom.
3. CheckFlowRate:Too lowofaflowratemightcausespews orburps.
Water FlowRate
Somefountains comewith adialorvalveto adjusttheflowrate, butifyou do nothavethis option orifyou are
still unsatisfied with yourflowrateafter changing thesettings, check outourtips below.
1. AdjusttheWater Level: Insufficientwater levels can affectwater intakeby thepump. Check thefountain
instructions to ensure theappropriatewater capacity foryourfountain.
2. CheckforKinks: Check to makesure thetubing is notkinked. Kinks in thetubing can sloworhalt the
flowofwater.
3. ClamptheHose: To slowthewater flow, try clamping thehosewith ahoseclamp orazip-tie.
Splashing
Having troublewith splashing?Somesplashing isinevitable, especially when you firstturn on yourfountain,
butifyou are experiencing excessivesplashing, try ourtroubleshooting tips below.
1. AdjusttheWater Level: Ensure thepump is fully submerged, butavoid overfilling yourfountain.
2. AdjustFlowRate: If yourpump includes adialorvalveto adjusttheflowrate, try changing thesettings to
see ifit affects splashing.If yourpump is notadjustable, check ourFlowRatesection to learn aboutother
ways to changetheflowrate.
3. AdjustPosition: Try arranging stones orplacing asplash guard, atthefountain base. You can also place a
screen in thebasin.
Leaking
If yourfountain is leaking, check thesequick tips on howto fix it.
1. AdjusttheWater Level: Yourfountain may leakifit is too full.
2. CheckTubing: Check thatthetubing is attachedcompletely and correctly.
3. CheckStopper: Ensure stopper is completely seated in thefountain. You can also use100%pureclear
siliconeto ensure apropersealis achieved.
4. Cracking: Yourfountainmay becrackedfromimproper winter care;see Winter Care in Maintenance Tips.