Campania International Pallisades FT-211 User manual

FT
-
2
11Pallisades
Fountain
Three peopleare recommendedfortheinstallationofthis fountain!
R
evised
December 11, 2018
PumpKitParts List
PK500 Pump (1)
#10 stopper(1)
Approx.12”length of1/2”BlackNon-Kinktubing (1)**
2”length of5/8”cleartubing (1)**
2”length of½”CPVCpipe(1)**
CopperSpiller(4)
2.8 oztubeofsilicone (1)
Wedges(2)
Hose clamps(1)*
*Hoseclamps maybe used asflow restrictors
** Tubing ispreassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately12.5gallonsof water.
Thisfountain usesanextra-largefountain cover.
(FTNCOV-XLG)
Compatible with#10 Refill Device and LEDkits
(Aspecialstopper isrequiredtousethe refill kit forthis
fountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF525 - 525GPH Pump
16 FTcord length

FT
-
2
11Pallisades
Fountain
Three peopleare recommendedfortheinstallationofthis fountain!
R
evised
December 11, 2018
Assemble your fountainonlevel surface capable ofholdingaminimumof731 poundswithanapproximate 9.5squarefootfootprint.
FT-111C (407lbs)
37”Lx37”Wx10”H
FT-143C (58lbs)
13.5”Lx13.5”Wx8”H
FT-211B (98lbs)
14”Lx14”Wx17”H
FT-211A(57lbs)
10.75”Lx10.75”Wx8”H
FT-143D(5lbs)
5.75”Lx3.75”Wx5”H
1. Place thebasin (FT-111C) intopositionwhere thefountainwill
beinstalled, ensuringthatitislevel.
2. Assemblethepumpkit
a. Useahoseclampto attachthenon-kinktubingtothe
pumpwater outlet.
b. Place thestopper aroundthepumpcordapproximately8
inchesfromthepump.
3. Feedthepumpcordthrough theholeinthebasin(FT-111C) and
thechannel.
4. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer works
besttopress thestopper inplace.
5. Place thepumphouse(FT-143C) over thepumpin thecenter of
thebasin(FT-111C).
6. Position thewater feature(FT-211B) over thepumphouse(FT-
143C).
7. InserttheCPVCendofthetubingassembly intothepipe
protruding fromthebottomofthewater feature (FT-211B).
8. Center and levelthewater feature (FT-211B) ontopofthepump
house(FT-143C).
9. Runathinbeadofsiliconealonethetop-inner most edgeofthe
water feature (FT-211B).
10.Place thecap(FT-211A)intothewater feature (FT-211B).
11.Usethesiliconeprovidedtoattachthecopper spillers
12.Cleanawayanyexcess silicone.
13.Fit thepumphousedoor(FT-143D)intothepumphouse(FT-
143C).
14.Letthefountainsit 24hoursbefore fillingwithwater.