Campania International Platia FT-34 User manual

F
T
-
34
Platia
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
February25, 2017
PumpKitParts List
PK140 Pump (1)
#10 stopper(1)
Approx.15”length of1/2”BlackNon-Kinktubing (1)
Wedges(4)
Hose clamps(3)
*Hoseclamps maybe used asflow restrictors
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewisecomponentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately8gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Compatible with#10 Refill Device
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
140 GPH Pump
6FTcord length

F
T
-
34
Platia
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
February25, 2017
Assemble yourfountainon alevel surface capable ofholdingaminimumof394 poundswithanapproximate 1squarefootfootprint.
FT-34E(28lbs)
14”Wx4”H
FT-34D(165lbs)
30”Wx7.75”H
FT-34C (16lbs)
11”Wx5”H
FT-34B (82lbs)
22.25”Wx6”H
FT-34A(34 lbs)
15.25”Wx4.5”H
FT-34CC(1lbs)
5”Lx2”Wx3.5”H
1. Place thebase(FT-34e) into position where thefountain will beinstalled,
ensuringthatit is level.
2. Assemblethepump kit
a. Usingahoseclamp, attach the1/2”non-kink tubingto thepump
outlet.
b. Place thestopper around thepump cord about8”fromthepump.
3. Center thelargebowl(FT-34D) overthebase(FT-34E).
4. Feed thepump cord through theholein thelargebowl(FT34D)and the
channelin thebase(FT-34E).
5. FIRMLY press thestopper into theholeevenly.
a. Note: Usingthehandleofascrewdriverorhammer works best.
6. Place thepump house(FT-34C)over thepump and in thecenter ofthelarge
bowl(FT-34D).
7. Center themiddlebowl(FT-34B)overthepumphouse(FT-34C).
8. Useahoseclamp to secure theother end ofthenon-kink tubingto thepipe
protrudingfromthebottomofthemiddlebowl(FT-34B).
9. Center thetop bowl(FT-34A) over themiddlebowl(FT-34B).
10. Fit thepipeprotrudingfromthetop ofthemiddlebowl(FT-34B)into the
holein thebottomofthesmall bowl(FT-34A).
11. Fit thepump housedoor(FT-34CC)into thepump house(FT-34C).
12. Fill thefountain with water.