Campania International FT-185 User manual

F
T
-
18
5P
arisienne
One
Tier Fountain
Professionalinstallation isrecommended forthisfountain!
R
evised
March31, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewisecomponentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK800 pump (2)
#10 stopper withdoublehole (1)
Metal plug for hole inside of basin(1)
2.8oztube ofsilicone(1)
3” lengthof 3/4” Clear Vinyltubing (2) **
Approx. 50” lengthof 5/8” BlackNon-Kinktubing (2)**
Approx. 8” lengthof5/8” BlackNon-Kinktubing(1)
Wedges(6)
Hose clamps(6)*
*Hoseclamps maybe used asflow restrictors
**Tubing is preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately130 gallonsof water.
Thisfountain usesamediumfountain cover but does
not cover the basin.
(FTNCOV-MED)
Compatible withRefill #10 Device and LEDkit
(A different style stopper mayberequestedfor therefillkit.)
TOOLSREQUIRED:
Bubble Level
Tape Measure
PUMPINFORMATION:
PP800 - 800GPH Pump
16 FTcord lengtheach

FT
-
185
Parisienne
One
Tier Fountain
Professionalinstallation isrecommended forthisfountain! Assemble your fountain on a levelsurface using crushed stone, gravel, or cementpad asthe base.
RevisedMarch31,2017
FGB-2030 (129 lbs)
72”Wx11.8”H
FT-184F(162 lbs)
18.25”Wx16.25”H
FT-184E (154lbs)
16.75”Wx15.5”H
FT-184D (254 lbs)
36”Wx10.5”H
FT-186F(9lbs)
9”Wx4.5”H
1. Placethefiberglass basin(FGB-2030)wherethefountainistobe
installed.
a. Be sure tocheckthateachpartislevel and centeredduringthe
assembly ofthisfountain.
2. Spreada thinamount ofsiliconeonboth pumpcordsapproximately3feet
fromthepumpsandfitthemintothe double holedstopper.
3. Feedthepumpcordsthroughtheholeinthebasin.
4. Toensurea level installation,makesurethatyourun theremainingcord
throughthechannel inthe bottomofthebasin.
5. Press stopperfirmlyand evenlyintotheholeofbasin.
6. Spreada thinbeadofsiliconearoundthe perimeterofthestopper, slitin
thestopper,andaroundthepumpcords.
7. Looselywrapcordsupinthecenterofthe basin.
8. Placethefountainbase(FT-184F)overthepumpsandthecords.
9. Placethelargepedestal(FT-184E)on topofthe base.
10. Usinghoseclamps, secureboth50” lengthsof5/8”non-kinktubingtothe
bottomofthelargebowl(FT-184D).
11. Feedbothpiecesoftubingdownthroughthelargepedestal(FT-184E)as
youlowerthelargebowl (FT-184D) intoplace.
a. Besurethe3/4” cleartubingendsare feddownintothe pump
cover(FT-184F).
12. Connect thecleartubingontothepumpwateroutletsofthepumps.
13. Placea hoseclampoverbothendsofthe 21” lengthof5/8”non-kink
tubing.
14. Secureoneend ofthetubingtooneofthe pipesprotrudingfrominsidethe
largebowl(FT-184D).
15. Feedthelooseend ofthe non-kinktubingthrough thecenterholeofthe
small pedestal(FT-186F)asyoulowerit intoposition.
FT-186A(28 lbs)
8.75”Wx14”H
FT-186B(2lbs)
6”Lx2.5”Wx3”H
FT-184G (7lbs)
10”Lx4.25”Wx5.25”H
FT-184I (248lbs)
41”Lx12”Wx15”H
FT-184H (248 lbs)
41”Lx12”Wx15”H
16. Securetopendofthenon-kinktubingtothepipe protrudingfromthe
bottomofthefinial(FT-186A).
17. Placethefinial(FT-186A)downontothesmall pedestal(FT-186F).
18. Fit thesmall pedestal door(FT-186B)intothesmall pedestal(FT-186F).
19. Coverpumpaccess withthepumpcoverdoor(FT-184G).
20. Position thecopingwiththe channel (FT-184I)about 6inchesfromthe
basin(FGB-2030)onthesideofthefountainwherethepumpcordisto
comeout.
21. Position the5remainingcopings(FT-184H) inacircle about6inches
fromthebasin.
22. Carefullypusheachpieceoneattime towardthe basinandintothe notch
ofthecoping.
a. Fit eachpiecetothecopingnext toit.
23. Fill thebasinwithwater.