Campania International FT-281 User manual

FT
-
281 St. RemyFountain
Two people are recommended for the installation ofthisfountain!
R
evised
April 14, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK800 pump (1)
#10 stopper(1)
# 7 drain stopper
Approx.12”length of1/2”BlackNon-kinktubing(1)**
2”length of5/8”clearvinyltubing (2)**
2”length of3/4"clearvinyltubing (1)**
2”length of1/2"PVCpipe (1)**
Wedges(3)
Hose clamps(2)
*Hoseclamps maybe used asflow restrictors
**Tubing is preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately30 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible withRefill #10 Deviseand LEDKits
(A different style stopper mayberequestedfor therefillkit.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPP800 - 800GPH Pump
16 FTcord length

FT
-
281 St. RemyFountain
Two people are recommended for the installation ofthisfountain!
R
evised
April 14, 2017
Assemble yourfountain on a levelsurface capable ofholdinga minimumof825 poundswith an approximate4 square
footfootprint.
FT-281D(572lbs)
46.5”Lx46.5”Wx11”H
FT-281B (57lbs)
11.5”Lx11.5”Wx9.75”H
FT-281A(175lbs)
10.5”Lx10.5”Wx37”H
FT-281C (3lbs)
6.75”Lx2.25”Wx5.75”H
1. Position thebasin (FT-281D)wherethefountain is to be
installed, ensuringthatitislevel.
2. Assemblethefountainplumbing
a. Connectthepreassembled tubingto thepump byslidingthe
3/4"clear tubingover thepump outlet.
b. Place thestopper around thepump cord approximately8
inches fromthepump.
3. Feedthepumpcordall thewaythroughtheholein the
basinandrun thecordthroughthechannelin thebottomto
ensure thefountainwillbelevel.
4. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
5. Place thepumpcover(FT-281B) over thepump. Ensure it
is placedproperlyandleveled.
6. Place theWater Feature (FT-281A)ontop ofthepump
cover.
7. Insertthe2”PVCpipethatis connectedtothenon-kink
tubingintothePVCcoupling inthebottomofthewater
feature (FT-281A).
8. Ensure thewater feature iscenteredandleveledon the
pumpcover.
9. Place thepumpcoverdoor(FT-281C) in thepumpaccess
openingofthepumpcover.
10.Fillthefountainwithwater.