Camplex CMX-HDMI-SFP User manual

INCLUDES
Two 5VDC/2A Power Supplies
Two SFP Modules
Two Pair IR Blasters
Two RS232 Connectors
• Transmission Up to 3300 Feet over Single Mode
• Single Fiber Simplex Operaon
• Video Resoluons up to 4K2K@50/60Hz
• Bi-direconal Infrared Control
• RS-232 Transmission
• Locking Power Adapters
• CE, RoHS Cered
CAMPLEX Broadcast Fiber Soluons
812 Kings Highway • Saugeres, NY 12477
www.camplex.com
USER MANUAL
d
Camplex CMX-HDMI-SFP
HDMI over Fiber SFP Extender
SFP-Based Transmission System
FEATURES

CMX-HDMI-SFP TRANSMITTER
Camplex CMX-HDMI-SFP USER MANUAL Page 2
CMX-HDMI-SFP RECEIVER
123
312
Front
56478910
Rear
Front
Rear
56789104
4Connect Power Supply
5Opcal—SFP Port for SFP-BL35T1-02DC
6Connect to HDMI Source
7 Connect IR Receiver Cable. Place IR Receiver Header Close to Display Device’s IR Receiver
8Connect IR Emier Cable. Place IR Emier Header Close to Source Device’s IR Receiver
9RS-232
10 Factory Use Only
1System Power LED Indicator
2Opcal Link LED Indicator
3HDMI Input Signal LED Indicator
4Connect Power Supply
5Opcal - SFP Port for SFP-BL531T-02DC
6Connect to HDMI Display
7 Connect IR Receiver Cable. Place IR Receiver Header Close to Display Device’s IR Receiver
8Connect IR Emier Cable. Place IR Emier Header Close to Source Device’s IR Receiver
9RS-232
10 Factory Use Only
1System Power LED Indicator
2Opcal Link LED Indicator
3HDMI Input Signal LED Indicator

SPECIFICATIONS
Camplex CMX-HDMI-SFP USER MANUAL Page 3
Transmission
Distance
Single Mode: 3300 feet/1000 meters
Mulmode (OM3): 1000 feet/300 meters
IR Frequency 20KHz-60KHz
RS-232 Baud Rate 4800-115200bps
Power Consumpon 3W
Power Input AC100 - 240V 50/60Hz
Dimensions Each
Unit
6.375 (w/mounng ears) x 2.7 x 0.75in /
162 x 68.58 x 19.05mm
Weight TX: 9.03 oz/256g, RX: 9.17 oz/260g
Compliance HDMI 2.0b (18Gbps), HDCP 2.2, DVI
Video Bandwidth 18Gbps
Video Resoluons
4K2K@50/60Hz(YUV4:4:4)
4K2K@30Hz
1080P@120Hz
1080P 3D@60Hz
Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2
Color Depth 8-bit, 10-bit, 12-bit
HDMI Audio
Formats
LPCM 2/5.1/7.1CH
Dolby Digital
DTS 5.1
Dolby Digital+
Dolby TrueHD
DTS-HD Master Audio
Dolby Atmos
DTS:X
CONNECTION DIAGRAM
Transmier
Receiver
Single Fiber
LC-LC Connecon
Single Mode

SAFETY PRECAUTIONS
5/1/2019Rev1a
1. To prevent re or shock hazard, do not expose this equipment to high humidity and/or dust. Do not use in an unprotected
outdoor installaon nor any area classied as overly damp or wet.
2. The temperature for installaon should be between 32°F to 140°F (0°C to 60°C). Avoid direct sunlight exposure or extreme
changes of temperature over a short period of me.
3. Do not disassemble the unit or place it on an unstable base.
4. Do not drop the unit and avoid heavy impact.
5. This unit should not be placed in a built-in installaon unless proper venlaon is provided. Any openings in the enclosure
must not be blocked or covered as they protect the unit from overheang.
6. Before cleaning, unplug the unit from all connecons. Use a clean, slightly damp cloth. Do not use liquid or aerosol cleaners.
Use appropriate cleaning kits for ber opc cables.
7. Do not overload outlets and extension cords as this could result in a re or electric shock.
8. Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this unit through openings as they may
touch dangerous voltage points or short-out parts that could result in a re or electric shock.
9. Do not aempt to open or service this unit yourself as opening or removing covers may expose you to dangerous voltage
and other hazards.
10. There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized dealer, or an author-
ized repair service company.
CAMPLEX Broadcast Fiber Soluons
812 Kings Highway • Saugeres, NY 12477
www.camplex.com