CanaSafe TiGer User manual

Fireman Suit
Safety is
the hero’s weapon
Nomex Tough
EN 469:2005

Fireman Suit
Fireman Suit
• Move+3D ease of movement with high reach sleeve design
• One chest pocket, radio-compable
• One ashlight holder
• Reinforced / extended grips on front pockets & adjusng elements
• High-Visibility vest exempon in combinaon with pants
Chest Pocket,
Radio-Compable
Reinforced
Shoulder Protectors
Ergonomically Shaped Collar With
Chin Guard & Heat Seal Design
Waterproof
Mulgrip Front
Closure
Knied Cus
With ITC System
Jacket:
Angled Head
Flashlight Holder

Fireman Suit
External Elbow & Shoulder Protecon
Shoulder protectors reduce the pressure of the
breathing apparatus.
Ergonomic design to protect the elbow when
crawling.
Made: Nomex Neoprene Coang
Adjustable Wristband
Adjustable band at each wrist with reinforced grip
Fully Detachable Liner
The jacket is detachable by zipper from inside to be
able to use as a single or mulple layered Garment.
Drag Rescue Device (DRD)
Harness and hand loop at the back of the
neck that enables a rescuer to grab and drag
a downed reghter.
Storage Pocket For IRS
Integrated rescue and restraint sling (IRS) in the special
storage pocket is quickly accessible when you need it.

Fireman Suit
Fireman Suit
• Integrated comfort suspend the system
• Two cargo pocket
• MOVE+3D freedom of movement with Leg Mobility design & performed secons
• High-visibility vest exempon in combinaon with the jacket
• FR Reecve stripe for higher visibility
Pants:
Adjustable waistband
Two adjustable bands at
each side of the waist area
Detachable Inner Layer
Trousers can be detached
by buons from inside to
be able to use as a single or
mulple layered Garment.
Knee Protecon
Ergonomic design to
prevent injury when
crawling and keep your
clothing from geng
damaged
Reinforced Cu Edges
And Heel Cutout At
The Boom Of The
Pre-Shaped Leg Steam
Grip Strip
Easy Grip Front Closure
Reinforced/Extended
Grips On Cargo Pockets
& Adjusng Elements
Padded Knee Area
Reinforced Inner Leg

Fireman Suit
Size Designaon:
Size (cm) Chest Waist Height Product ID
SMALL 85 - 90 73 - 78 163 - 167 37222
MEDIUM 90 - 95 78 - 83 168 - 172 37223
LARGE 95 - 100 83 - 88 173 - 177 37224
X LARGE 100 - 105 88 - 93 178 - 182 37225
2X LARGE 105 - 110 93 - 98 183 - 187 37226
Pictograms & Levels Of Performance
Level 2 for Protecon against contact, ame & radiaon heat transfer
Level 2 for Water Penetraon
Level 2 for Water Vapour Resistance
All Main Constuent Materials
Outer Shell: Nomex Tough
Moisture Barrier: 70% meta-aramid/ 30% para-aramid Laminated to FR ePTFE
membrane, 70gsm;
Thermal Lining: 95% Nomex/ 5% Kevlar 150gsm quilted to lining fabric 50%
Nomex/ 50% FR Viscose, 130gsm.
Care Labelling
“The materials used in this garment were tested to EN469 after 5 wash/dry
cycles, however, this number of cycles does not relate directly to the life
expectancy. Continued fitness for a purpose is dependent on inspection and
maintenance in accordance with Regulation (EU) 2016/425.”
Coverage
“For your safety, garment shall be inspected regularly for obvious damage.”,
please be sure that the upper and lower body including the neck, arms to the
wrists and legs to the ankles, are protected and covered by the clothing described
60o
P
Xf2
Xr2
Y2
Z2
EN 469:2005
X2
Y2
Z2

Fireman Suit
Fireman Suit
in this European Standard, but other parts of the body are not and need essenal
means to be fully protected.
Instrucons For Use
- CAUTIONS:
Do not wear if any ammable contaminants are aached.
Do not wear if components of the garment are missing.
Do not wear if the fabric is ered, faded or brile
Do not wear if there are any holes or splits
Do not wear if the seams or stches are damaged.
To ensure your safety please seek professional repair in case
of any of the above damage,
- Fing:
Jackets & trousers should be worn together to ensure a sucient overlap. All
closure systems should be secured fully.
- Instrucons Concerning Appropriate Use Of The Product To Minimise
The Risk Of Injury:
Garments should not be removed in the environment of intended use.
The re ghng suit does not provide full body protecon, other forms of PPE such
as re hoods, gloves, boots and helmets, cered to similar standards, should be
worn.
- Limitaons On Use:
These garments have been designed to give a specied level of protecon for use
in structural re ghng. This garment is not suitable for extremely high-tempera-
ture re ghng environments or ame entry.
- Instrucons For Storage & Maintenance:
The suit should be stored in a dry, well-venlated warehouse, away from extreme
- CAUTIONS:

Fireman Suit
temperatures, sunlight and rain. If the suit is damaged, the suit should be repaired
immediately. If the damage is too severe the garment should be removed from
service.
Do not store with oils and corrosive materials.
- Care & Cleaning:
Fire ghng clothing requires separate
washing, & water temperature controlled
at about 60o, washed for about 30 minutes
or so;
Detachable liners should be removed
from the shell & laundered separately.
All closures should be fastened:
velCrO® hook tape covering velCrO®
loop tape, hooks and dees fastened,
zippers zipped and snap closed.
It is imperave that you cover the
hook poron of all hooks and loop to
prevent snagging during laundering.
We recommend a front loading
washing machine, which does not
have an agitator, and preferably
one that is designated specifically
for cleaning turnouts.
A stainless steel tub should be ulized
if available.
We suggest using a laundry bag to
protect the inside of the washing
machine from the hardware
(to protect the hardware from the
agitator of a washing machine when
using a top load model).
- Instrucon Concerning Repair:
We use 100% aramid thread on garments. All eld repairs should use materials
consistent with the informaon on the content label.
All repairs/alteraons should use the same stch conguraons. All stress areas
should be reinforced, preferably using a bartack.
Never stch through a Moisture Barrier or Thermal Liner. In fact, eld alteraons
or repairs of protecve barriers should only be undertaken by trained personnel.

Fireman Suit
An equal amount of replacement trim must be added to areas that have been
covered up by repairs or alteraons.
Never perform any repair or alteraon that will disturb the original performance
specicaons or integrity of the garment.
- Note:
1. The garments have no known allergic, carcinogenic, toxic and mutagenic
effects.
2. Prolonged wearing of the suit & a full assembly (fire hoods, helmets, boots
& gloves) can cause discomfort in the form of heat stress.
Disposal
Mechanical disrupon or incinerang the product.
Chemical / Fuel Splash
In the event of an accidental splash of chemical or ammable liquids on clothing
covered by this European Standard, the wearer should immediately withdraw and
remove the garments, which shall then be cleaned or removed from service.
The Name, Address & Identification Number Of Notified Body
Involved In EU Type-Examination (Module B).
Noed Body No. 02895,
Shirley Technologies Europe Limited
Sky Business Centres, Unit 21 Block 1 Port Tunnel Business Park, Clonshaugh
Business and Technology Park, Dublin-Ireland
Canasafe Industries Inc.
Ontario, Canada
www.canasafe.com