E: AF Mode
Shooting Mode
� Press the <W> button, then
turn the <6/5> dial.
� Turn the <
6
> or <
5
> dial to
set the exposure, then shoot.
� Set the lens focus mode switch
to <
E
>.
• Press the <
o
> button,
then turn the <
6
> dial.
X (One-Shot AF):
For still subjects
Z(AI Servo AF):
For moving subjects
Instead of pressing the shutter button halfway, AF is also possible
by pressing the <p> button.
Shooting Operation
Shooting Mode 6 Dial 5 Dial
d
(Program AE)
Program shift
Exposure compensation
s
(Shutter-priority AE)
Shutter speed setting
Exposure compensation
f
(Aperture-priority AE)
Aperture setting
Exposure compensation
a
(Manual exposure)
Shutter speed setting
Aperture setting
q Metering Mode
S
AF Point
� Press the <S> button and use
the <9> or turn the <6> and
<5> dials.
� By pressing <9> straight down,
you can toggle between the center
AF point z automatic selection.
� If all the peripheral AF points light
up, automatic AF point selection
will take effect.
� Press the <Q> button, then
turn the <
6
> dial.
qEvaluative metering:
Standard metering mode
w
Partial metering: Approx. 13.5% at center
r
Spot metering: Approx. 3.8% at center
e
Center-weighted average metering
:
Metering weighted at the center and
averaged for the entire scene
Multiple spot metering is possible with the <I> button.
9
5
6
O
Exposure Compensation
R
: Drive Mode
� Press the <
o
> button,
then turn the <
5
> dial.
u:
Single shooting
o:
High-speed continuous shooting
(Approx. 10 shots per sec.)
p:
Low-speed continuous shooting
(Approx. 3 shots per sec.)
k:
10-sec. self-timer
l:
2-sec. self-timer
6:
Silent single shooting
� Set the power switch to <
J
>.
� Focus the subject, then check the
exposure setting.
� Turn the <
5
> dial to set the
exposure compensation amount.
� You can set the amount up to ±3
stops in 1/3-stop increments.
� To cancel exposure
compensation, set the exposure
level indicator to the standard
exposure index (<a> or <C>).
�You can also set it with the <O> button and <6/5> dial.
� For light-colored subjects, set it to the plus side. For
dark-colored subjects, set it to the minus side.
Standard exposure index
Exposure level
–+
–
+
Increased exposure
Decreased exposure
w
AE Lock
Y
Auto Exposure Bracketing (AEB)
� Press the <W> button and
<o> button
simultaneously, then turn the
<6/5> dial to set the AEB
amount.
� It can be set up to ±3 stops in
1/3-stop increments.
� The bracketed shots will be taken
in the current drive mode in the 1,
2, 3 sequence.
� After the three bracketed shots
are taken, AEB will not be
canceled. To cancel AEB, set the
AEB increment to “0.0”.
� Focus the subject.
� Press the <A> button to lock the
current exposure setting.
� The exposure level indicator will
show the AE lock exposure level
and the current exposure level in
real-time.
� Recompose and take the picture.
AEB increment
AE lock
2. Decreased
exposure
3. Increased exposure
1. Standard exposure
� Select [6 Live View/Movie
func. set.].
� Select [LV z/k set.] and set
[Stills].
� Press the shutter button halfway
to turn off the menu screen.
� Press <0> to display the Live
View image on the LCD monitor.
� Press the <W> button and
turn the <6/5> dial to select
the shooting mode.
� Press the shutter button halfway.
After focus is achieved, press the
shutter button completely.
� Press <0> to end the Live View
shooting.
z
Live View Shooting
Battery Life with Live View Shooting
Temperature At 23°C / 73°F At 0°C / 32°F
Possible shots Approx. 270 shots Approx. 230 shots
� Select [LV z/k set.] and set
[Movies].
� Select [Movie rec. size] and set
the size.
� Press the shutter button halfway
to turn off the menu screen.
� Pressing <0> will display the
movie image on the LCD monitor.
� Press the <W> button and
turn the <6/5> dial to select a
shooting mode other than <a>.
� Press the shutter button halfway
to focus.
� Press the <I> button to start
shooting a movie. During movie
shooting, the “o” mark will
appear on the upper right.
� To stop shooting the movie, press
the <I> button again.
k
Shooting Movies
� If you set the shooting mode to <a>, you can set manual
exposure for movie shooting.
� You can take a still photo during movie shooting by pressing
the shutter button completely.
Autoexposure Shooting
Recording movie
Frame rate
Custom Functions
C.Fn I: Exposure
1 Exposure level
increments
2 ISO speed setting
increments
3 Set ISO speed range
4 Bracketing auto cancel
5 Bracketing sequence
6 Number of bracketed
shots
7 Spot metering link to AF
point
8 Safety shift
9 Select usable shooting
modes
10 Select usable metering
modes
11 Exposure mode in
manual exposure
12 Set shutter speed range
13 Set aperture value range
14 Apply shooting/metering
mode
15 Flash sync. speed in Av
mode
16 AE Microadjustment
17 FE Microadjustment
C.Fn II: Image/Flash
exposure/Display
1 Long exposure noise
reduction
2 High ISO speed noise
reduction
3 Highlight tone priority
4 Auto Lighting Optimizer
5 E-TTL II flash metering
6 Shutter curtain sync.
7 Flash firing
8 Viewfinder info. during
exposure
9 LCD panel illumination
during Bulb
10 INFO. button when
shooting
C.Fn III: Auto focus/Drive
1 USM lens electronic MF
2 AI Servo tracking
sensitivity
3 AI Servo 1st/2nd image
priority
4 AI Servo AF tracking
method
5 Lens drive when AF
impossible
6 Lens AF stop button
function
7 AF Microadjustment
8 AF expansion with
selected point
9 Multi-controller while
metering
10 Selectable AF point
11 Switch to registered AF
point
12 AF point auto selection
13 AF point display during
focus
14 AF point brightness
15 AF-assist beam firing
16 Orientation linked AF
point
17 Mirror lockup
18 Continuous shooting
speed
19 Limit continuous shot
count
C.Fn IV: Operation/Others
1 Shutter button/AF-ON
button
2 AF-ON/AE lock button
switch
3 Quick Control Dial in
metering
4 Assign SET button
5 Tv/Av setting for Manual
exposure
6
Dial direction during Tv/Av
7 Av setting without lens
8 WB + media/image size
setting
9 H button function
10 Button function when 5
<OFF>
11 Start movie shooting
12 Focusing Screen
13 Timer length for timer
14 Shortened release time
lag
15 Add aspect ratio
information
16 Add image verification
data
