Canon PowerShot SX260 HS User manual

Camera User Guide
ENGLISH
• Before use, be sure to read this guide, including the
safety precautions.
• This guide will familiarize you with how to use the camera
correctly.
• Keep the guide handy for future reference.
COPY

2
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera dealer.
•A memory card is not included (see below).
For information about the included software, refer to the ImageBrowser EX
User Guide, in PDF format (p. 26).
The following memory cards (sold separately) can be used, regardless of
capacity.
•SD memory cards*
•SDHC memory cards*
•SDXC memory cards*
•Eye-Fi cards
* Conforms to SD specifications. However, not all memory cards have been verified to
work with the camera.
Package Contents
PDF Manuals
•Adobe Reader is required to view the PDF manuals.
Compatible Memory Cards
Camera Battery Pack NB-6L
(with terminal cover)
Battery Charger
CB-2LY/CB-2LYE
Interface Cable IFC-400PCU Wrist Strap WS-DC11
Warranty CardGetting Started DIGITAL CAMERA
Solution Disk
COPY

Preliminary Notes and Legal Information
3
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
•Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
•Images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
•The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
•Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design
specifications, in rare cases some pixels may be defective or may appear
as red or black dots. This does not indicate camera damage or affect
recorded images.
•The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
•When the camera is used over an extended period, it may become warm.
This does not indicate damage.
About Eye-Fi Cards
•Always confirm beforehand that memory cards are supported on other devices
such as card readers and computers (including the current version of your
operating system).
Preliminary Notes and Legal Information
COPY

4
•In this guide, icons are used to represent the corresponding camera
buttons and dials on which they appear or which they resemble.
•The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
: Indicates that the function is used when shooting or
viewing still images.
: Indicates that the function is used when shooting or
viewing movies.
•On-screen text is indicated in brackets.
•: Important information you should know
•: Notes and tips for expert camera use
•(p. xx): Pages with related information (in this example, “xx” represents a
page number)
•Instructions in this guide apply to the camera under default settings.
•For convenience, all supported memory cards are simply referred to as
“the memory card”.
Part Names and Conventions in This
Guide
Lamp
Lens
Zoom lever
Shooting: i(telephoto) / j(wide
angle)
Playback: k(magnify) / g(index)
Power button
Shutter button
GPS antenna
Microphone
Flash
Speaker
Tripod socket
DC coupler terminal cover
Memory card/battery cover
Strap mount
SX260 HS
Still Images
Movies
COPY

Part Names and Conventions in This Guide
5
zTurning the control dial is one way to choose
setting items, switch images, and perform
other operations. Most of these operations
are also possible with the opqr buttons.
•The following camera buttons and controls are represented by icons.
oUp button on back
qLeft button on back
rRight button on back
pDown button on back
5Control dial on back
mFUNC./SET button on back
Screen (LCD monitor)
Mode dial
AV OUT (Audio/video output) /
DIGITAL terminal
HDMITM terminal
1(Playback) button
nbutton
l(Display) button
Movie button
Indicator
b(Exposure compensation) / Up button
e(Macro) / f(Manual focus) / Left
button
Control dial
FUNC./SET button
h(Flash) / Right button
Q(Self-timer) / a(Single image erase) /
Down button
COPY

6
Package Contents .............................2
Compatible Memory Cards ................2
Preliminary Notes and Legal
Information.......................................3
Part Names and Conventions in This
Guide ...............................................4
Contents ............................................6
Contents: Basic Operations ...............8
Safety Precautions...........................10
Initial Preparations ...........................14
Trying the Camera Out ....................21
Included Software, PDF Manuals ....25
Accessories .....................................32
1 Camera Basics .................35
On/Off ..............................................36
Shutter Button..................................37
Shooting Modes...............................38
Shooting Display Options ................38
FUNC. Menu....................................39
n..............................................40
Indicator Display ..............................41
Clock................................................41
2 Using GPS
Function ...............43
Using GPS Function ........................44
3 Smart Auto Mode .............53
Shooting in Smart Auto Mode ......... 54
Common, Convenient Features ...... 63
Using Face ID ................................. 69
Image Customization Features ....... 78
Helpful Shooting Features............... 84
Customizing Camera Operation...... 87
4 Other Shooting Modes.....89
Brightness/Color Customization (Live
View Control) ................................ 90
Easy Mode ...................................... 91
Auto Clip Recording
(Movie Digest)............................... 92
Specific Scenes............................... 93
Image Effects (Creative Filters)..... 103
Discreet Mode ............................... 110
Shooting Various Movies .............. 111
5 Gmode ...........................115
Shooting in Program AE Mode (G
Mode).......................................... 116
Image Brightness (Exposure
Compensation)............................ 116
Color and Continuous Shooting .... 120
Shooting Range and Focusing...... 125
Flash ............................................. 134
Other Settings ............................... 137
6 Tv, Av, and M Mode........139
Specific Shutter Speeds
(Tv Mode).................................... 140
Specific Aperture Values
(Av Mode) ................................... 141
Specific Shutter Speeds and Aperture
Values (M Mode)......................... 142
Contents
SX260 HS
COPY

Contents
7
7 Playback Mode ............... 145
Viewing ......................................... 146
Browsing and Filtering Images...... 151
Editing Face ID Information .......... 154
Image Viewing Options ................. 156
Protecting Images ......................... 159
Erasing Images ............................. 163
Rotating Images............................ 165
Image Categories.......................... 167
Editing Still Images ....................... 172
Editing Movies............................... 178
8 Setting Menu ..................181
Adjusting Basic Camera
Functions .................................... 182
9 Accessories....................195
Tips on Using Included
Accessories ................................ 196
Optional Accessories .................... 197
Using Optional Accessories.......... 199
Printing Images ............................. 204
Using an Eye-Fi Card.................... 216
10 Appendix.........................219
Troubleshooting ............................ 220
On-Screen Messages ................... 224
On-Screen Information.................. 226
Functions and Menu Tables.......... 230
Handling Precautions.................... 240
Index ............................................. 241
COPY

8
4Shoot
zUse camera-determined settings (Auto Mode) ............................. 54
zFollow simple camera instructions (Easy Mode) .......................... 91
zWhere sound and flash are not allowed (Discreet Mode)........... 110
zWhile adjusting image settings (Live View Control)...................... 90
zFocus on faces ................................................... 54, 72, 93, 96, 129
zWithout using the flash (Flash Off) ............................................... 66
zWith myself in the shot (Self-Timer)........................................ 64, 99
zAdd the shooting date and time (Date Stamp).............................. 67
zMovie clips and photos together (Movie Digest)................... 92, 153
zUse Face ID.......................................................................... 69, 154
Contents: Basic Operations
Monochrome (p. 107)
Fish-Eye Effect
(p. 104)
IP
Against Snow (p. 94)Portraits (p. 93)
Shooting people well
Matching specific scenes tS
Applying special effects
Low Light (p. 94) Fireworks (p. 94)Under Water
(p. 94)
Miniature Effect
(p. 104)
Toy Camera Effect
(p. 106)
Night Scenes
(p. 93)
Vivid Colors
(p. 103)
Poster Effect
(p. 103)
Smooth Skin (p. 96)
Soft Focus (p. 106)
COPY

Contents: Basic Operations
9
1View
zView images (Playback Mode) ................................................... 146
zFollow simple camera instructions (Easy Mode) .......................... 91
zAutomatic playback (Slideshow)................................................. 156
zOn a TV ...................................................................................... 199
zOn a computer.............................................................................. 26
zBrowse through images quickly.................................................. 151
zErase images.............................................................................. 163
EShoot/View Movies
zShoot movies........................................................................ 54, 111
zView movies ............................................................................... 146
zFast-moving subjects, slow-motion playback ............................. 112
cPrint
zPrint pictures............................................................................... 204
Save
zSave images to a computer.......................................................... 26
COPY

10
•Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
•The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
•Be sure to also check the guides included with any separately sold accessories you
use.
Safety Precautions
Warning Denotes the possibility of serious injury or death.
•Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
•Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
•Use only recommended power sources.
•Do not attempt to disassemble, alter or apply heat to the product.
•Avoid dropping or subjecting the product to severe impacts.
•To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
•Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
•Do not use organic solvents such as alcohol, benzine, or thinner to clean the
product.
•Do not let the product come into contact with water (e.g. sea water) or other
liquids.
•Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
COPY

Safety Precautions
11
•Use only the recommended battery.
•Do not place the battery near or in direct flame.
•Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
•Do not handle the power cord with wet hands.
•Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
•Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
•Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
•Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on an audio CD player (music player). Additionally, this could damage
the speakers.
Caution Denotes the possibility of injury.
•When holding the camera by the strap, be careful not to bang it, subject it to
strong impacts or shocks, or let it get caught on other objects.
•Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
•Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
•When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
•Avoid using, placing or storing the product in the following places:
-Places subject to strong sunlight
-Places subject to temperatures above 40 °C (104 °F)
-Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
COPY

Safety Precautions
12
•Viewing images on the camera screen for prolonged periods may cause
discomfort.
•Take care not to pinch your finger when the flash lowers.
This could result in injury.
Caution Denotes the possibility of damage to the equipment.
•Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
•When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
•Do not push down on the flash, or pry it open.
This may cause the product to malfunction.
•In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
•Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
•Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
•Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
•Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
•Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
•Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
COPY

Safety Precautions
13
•When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
•Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
COPY

14
Prepare for shooting as follows.
zThread the end of the strap through the strap
hole ( ), and then pull the other end of the
strap through the loop on the threaded end
().
zPlace the strap around your wrist.
zWhen shooting, keep your arms close to your
body and hold the camera securely to
prevent it from moving. If the flash is up, do
not rest your fingers on it.
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
Insert the battery.
zAfter aligning the omarks on the battery and
charger, insert the battery by pushing it in
( ) and down ( ).
Initial Preparations
Attaching the Strap
Holding the Camera
Charging the Battery
COPY

Initial Preparations
15
Charge the battery.
zFor CB-2LY: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
zFor CB-2LYE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
XThe charging lamp turns orange and
charging begins.
XWhen the charging is finished, the lamp turns
green.
Remove the battery.
zAfter unplugging the battery charger, remove
the battery by pushing it in ( ) and up ( ).
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera (p. 185).
Check the card’s write-protect tab.
zRecording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.
CB-2LY
CB-2LYE
•To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
•For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or
damage to the product.
•For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Specifications” in the Getting Started
guide.
Inserting the Battery and Memory Card
COPY

Initial Preparations
16
Open the cover.
zSlide the cover ( ) and open it ( ).
Insert the battery.
zWhile pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
zIf you insert the battery facing the wrong way,
cannot be locked into the correct position.
Always confirm that the battery is facing the
right way and locks when inserted.
Insert the memory card.
zInsert the memory card facing as shown until
it clicks into the locked position.
zMake sure the memory card is facing the right
way when you insert it. Inserting memory
cards facing the wrong way may damage the
camera.
Close the cover.
zLower the cover ( ) and hold it down as you
slide it until it clicks into the closed position
().
Terminals Battery Lock
Terminals
COPY

Initial Preparations
17
Remove the battery.
zOpen the cover and press the battery lock in
the direction of the arrow.
XThe battery will pop up.
Remove the memory card.
zPush the memory card in until it clicks, and
then slowly release it.
XThe memory card will pop up.
A screen for setting the date and time is displayed the first time you turn the
camera on. Be sure to specify the date and time, which is the basis for dates
and times added to your images.
Turn the camera on.
zPress the power button.
XThe [Date/Time] screen is displayed.
Set the date and time.
zPress the qr buttons to choose an option.
zPress the op buttons or turn the 5dial to
specify the date and time.
zWhen finished, press the mbutton.
Removing the Battery and Memory Card
Setting the Date and Time
COPY

Initial Preparations
18
Set the local time zone.
zPress the qr buttons or turn the 5dial to
choose your local time zone.
Finish the setup process.
zPress the mbutton when finished. After a
confirmation message, the setting screen is
no longer displayed.
zTo turn off the camera, press the power
button.
Adjust the date and time as follows.
Access the camera menu.
zPress the nbutton.
•Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
•To set daylight saving time (1 hour ahead), choose in step 2 and then
choose by pressing the op buttons or turning the 5dial.
Changing the Date and Time
COPY

Initial Preparations
19
Choose [Date/Time].
zMove the zoom lever to choose the 3tab.
zPress the op buttons or turn the 5dial to
choose [Date/Time], and then press the m
button.
Change the date and time.
zFollow step 2 on p. 17 to adjust the settings.
zPress the nbutton to close the menu.
SX260 HS
SX240 HS
•Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
•The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, p. 197),
even if the camera is left off.
•Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 17 to set the date and time.
•Automatic date and time updating is possible using GPS (p. 51).
SX260 HS
COPY

Initial Preparations
20
The display language can be changed as needed.
Enter Playback mode.
zPress the 1button.
Access the setting screen.
zPress and hold the mbutton, and then
immediately press the nbutton.
Set the display language.
zPress the opqr buttons or turn the 5dial
to choose a language, and then press the m
button.
XOnce the display language has been set, the
setting screen is no longer displayed.
Display Language
•A clock icon is displayed if you wait too long in step 2 after pressing the m
button before you press the nbutton. In this case, press the mbutton to
dismiss the clock icon and repeat step 2.
•You can also change the display language by pressing the nbutton and
choosing [Language ] on the 3tab.
COPY