Canon PIXMA MX922 User manual

Setting Up Your MX922 In
Default Mode (Tel Priority Mode)
Without An Answering Machine
DSL/Cable Modem Connection
Next

Fax Easy Setup
NextPrevious
Click Next to step through this image-friendly version of Fax Easy Setup.
If you started Fax Easy Setup, on the fax machine’s operation panel, and
prefer to go through this image-friendly version…
Step 1
Press the FAX button at any screen
to go to fax standby mode.
Step 2
Click Next to proceed
through the setup.

Connecting The Phone Lines
NextPrevious

Fax to Phone Line Connection
NextPrevious 4
Before
HandSet
(Phone)
(ExistingPhone Cord)
Walljack
DSL/Cable
Modem P
C
(ExistingPhoneCord)
After
(ExistingPhoneCord)
(ExistingPhone Cord)
Walljack DSL/Cable
Modem
P
C
HandSet
(Phone)
(PhoneCordincludedwith
Canonprinter)

Fax to Phone Line Connection
NextPrevious 5
•PlugtheprovidedphonecordintotheDSL/CableModem.
(ExistingPhoneCord)
(ExistingPhone Cord)
Walljack DSL/Cable
Modem
P
C
HandSet
(Phone)
(PhoneCordincludedwith
Canonprinter)

Fax to Phone Line Connection
NextPrevious 6
•Plugtheprovidedphonecordintothe“LINE”jackontherearof
themultifunction.
(ExistingPhoneCord)
(ExistingPhone Cord)
Walljack DSL/Cable
Modem
P
C
HandSet
(Phone)
(PhoneCordincludedwith
Canonprinter)

Fax to Phone Line Connection
NextPrevious 7
•Removethewhiteplugfromtheupperjacklabeled“EXT.”
(ExistingPhoneCord)
(ExistingPhone Cord)
Walljack DSL/Cable
Modem
P
C
HandSet
(Phone)
(PhoneCordincludedwith
Canonprinter)

Fax to Phone Line Connection
NextPrevious 8
•Plugthesecondphonecordintothe“EXT.”jacklocatedontherearof
themultifunction.
(ExistingPhoneCord)
(ExistingPhone Cord)
Walljack DSL/Cable
Modem
P
C
HandSet
(Phone)
(PhoneCordincludedwith
Canonprinter)

Fax to Phone Line Connection
NextPrevious 9
•Plugtheexistingphonecordintothephone
(ExistingPhoneCord)
(ExistingPhone Cord)
Walljack DSL/Cable
Modem
P
C
HandSet
(Phone)
(PhoneCordincludedwith
Canonprinter)

Setting Up The Receive Mode
NextPrevious

Step 1
Turn on the MX922 by pressing the
ON button if the machine is not
powered on already.
Step 2
Press the FAX button.
NextPrevious 11

Step 3
The fax standby screen will appear.
Step 4
Press the center FUNCTION button.
NextPrevious 12

Step 5
The Receive mode settings
screen will appear.
Step 6
Use the UP or Down button to
highlight “TEL priority mode”.
NextPrevious 13

Step 7
Press the right FUNCTION button
under the Advanced label.
Step 8
The Advanced screen will appear.
NextPrevious 14

Step 9
Use the UP or DOWN button to
select “User-friendly reception”.
Step 10
Press the OK button.
NextPrevious 15

Step 11
The User-friendly reception
screen will appear.
Step 12
Use the UP or DOWN button to
select “ON”.
NextPrevious 16

Step 13
Press the OK button.
Step 14
The screen will quickly flash “User-
friendly reception ON”.
NextPrevious 17

Step 15
The screen will return to the
Advanced window.
Step 16
Press the Back button to return to
Receive mode settings window.
NextPrevious 18

Step 17
Confirm “TEL priority mode” is
highlighted and then press the OK
button.
Step 18
You will return to the “Fax standby
screen” and ‘TELpriority’ will appear
on the screen.
NextPrevious 19

Receiving A Fax
To receive a fax:
• Pick up the handset on the phone connected to the MX922.
• Listen for fax tones.
• When the tones stop hang up the handset.
• The MX922 will receive the fax document.
IMPORTANT:In order to receive a fax, you must pick up the handset on a
phone that is connected to the multifunction.
Previous 20