Canon varioPRINT 120 Technical manual

Canon varioPRINT 120
Customer Expectations Document
Version 13
Engineering Services and Solutions Division
Business Imaging Systems Group, Canon U.S.A., Inc.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 2
Contents
1. Introduction............................................................................................................. 6
2. Product Overview ................................................................................................... 7
2.1 Summary of Functions .................................................................................... 8
2.2 Offset Press vs. DirectPress ........................................................................... 8
2.3 Standard Configuration ................................................................................... 9
2.4 PRISMAsync Controller................................................................................. 10
2.4.1 New PRISMAsync R5.2 Features.................................................... 11
2.4.2 PRISMAsync Standard Software ..................................................... 12
2.4.3 PRISMAsync Optional Software ...................................................... 12
2.4.4 PRISMAsync System Backup.......................................................... 13
2.4.5 PRISMAsync Firmware Updates ..................................................... 13
2.5 Professional Input/Output Accessories ......................................................... 14
3. Machine Dimensions and Space Requirements ................................................ 16
3.1 Dimensions ................................................................................................... 16
3.2 Weight ........................................................................................................... 18
3.3 Dimensions Diagrams ................................................................................... 19
3.4 Floor Structure Requirements ....................................................................... 22
4. Power/Electrical Requirements ........................................................................... 23
4.1 Power Requirements for the Main Unit and Optional Accessories ................ 24
5. Environmental Factors and Requirements......................................................... 25
5.1 Temperature and Humidity Conditions.......................................................... 25
5.2 Temperature Gradient................................................................................... 25
5.3 Ventilation ..................................................................................................... 25
5.4 Lighting.......................................................................................................... 26
5.5 Sunlight ......................................................................................................... 26
5.6 Ammonia....................................................................................................... 26

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 3
6. Specifications ....................................................................................................... 27
6.1 Main Unit ....................................................................................................... 27
6.2 PRISMAsync Controller................................................................................. 29
6.2.1 USB Stick......................................................................................... 30
6.3 Duplex Color Image Reader-D1 with Feeder ................................................ 31
6.4 Color Image Reader-J1 (For the Printer Only Model).................................... 31
6.5 ePIM-C1........................................................................................................ 32
6.6 Bulk Tray Small Format................................................................................. 32
6.7 Document Insertion Unit-F1 .......................................................................... 33
6.8 High Capacity Stacker-E1 ............................................................................. 33
6.9 High Capacity Stacker-G1............................................................................. 34
6.10 Paper Folding Unit-F1 ................................................................................... 34
6.11 Finisher-AK1 ................................................................................................. 35
6.12 Saddle Finisher-AK2 ..................................................................................... 39
6.13 Puncher Unit-BS1 ......................................................................................... 43
6.14 Professional Puncher-B1 with Professional Puncher Integration Unit-A1 ..... 44
6.15 Booklet Trimmer-D1 ...................................................................................... 44
6.16 Two-Knife Booklet Trimmer-A1 ..................................................................... 45
6.17 SDD Square Fold Booklet-Maker with Two-Knife Trimmer ........................... 46
6.18 SDD Square Fold Booklet-Maker .................................................................. 47
6.19 SDD BLM300C Professional Booklet Maker ................................................. 47
6.19.1 SDD Front Trimmer BLT6989 Specifications................................... 48
6.19.2 SDD 2-Knife Trimmer STR6702 Specifications ............................... 49
6.19.3 SDD Square Fold SFM6904 Specifications ..................................... 49
6.19.4 SDD Rotator RTM6940 Specifications............................................. 50
6.19.5 SDD Long Belt Stacker BST6800 Specifications ............................. 50
6.19.6 SDD Short Belt Stacker BST6900 Specifications ............................ 50
6.20 PowerLift ....................................................................................................... 51
6.21 Decurler Unit-A1............................................................................................ 51
6.22 MAX Ring Binder........................................................................................... 52
7. System Options and Software............................................................................. 53
7.1 Remote User Interface-C1 ............................................................................ 53
7.2 Removable HD Kit-C1................................................................................... 53
7.3 PRISMAdirect................................................................................................ 53
7.4 PRISMAprepare ............................................................................................ 53
7.5 Other Canon varioPRINT 120 Software Optional Licenses........................... 54
8. Safety Notifications .............................................................................................. 55
8.1 Canon varioPRINT 135 Series Safety Notification ........................................ 55
8.2 High Capacity Stacker-G1 Safety Notification............................................... 55
9. Installation Review ............................................................................................... 56
9.1 Installation Time ............................................................................................ 56
9.2 Customer Responsibilities............................................................................. 57
10. Printer Operation Care ......................................................................................... 58
11. Consumables ........................................................................................................ 59
11.1 Consumable Parts......................................................................................... 59
11.1.1 Estimated Life of Consumables ....................................................... 60
12. Toner Container and Toner Supply Unit Yields ................................................. 60
13. Estimated Performance Standards ..................................................................... 61

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 4
14. Optimum Monthly Product Performance............................................................ 62
15. Machine Reliability and Productivity .................................................................. 63
15.1 Machine Reliability and Service Call Ratio .................................................... 63
15.2 Print Speed ................................................................................................... 64
15.3 Mixed Media Productivity .............................................................................. 64
15.4 Paper and Toner ........................................................................................... 65
16. Media Usage/Compatibility.................................................................................. 66
16.1 Media Characteristics by Media Library Parameters..................................... 66
16.2 Media Specific Adjustments .......................................................................... 67
16.3 Advanced Media Settings.............................................................................. 68
16.4 Paper Handling and Storage ......................................................................... 69
16.5 Selecting the Correct Media .......................................................................... 70
16.6 Note for Customers Who Cut Their Own Paper ............................................ 70
16.7 Paper Sizes and Feed Location Chart .......................................................... 71
17. Responsibility Matrix ........................................................................................... 72

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 5
IMPORTANT
The purpose of this Customer Expectations Document is to explain the current
features and capabilities of the Canon varioPRINT 120, and provide customers
information about what to expect before purchasing the machine.
The information included in this document has been pulled from various sources,
including product reference guides, service guides, and user manuals.
Specifications and other information contained herein may vary slightly, and in a
non-material way, from actual device values, including those found in advertising
and other printed matter. Part numbers, yield information, and specifications are
subject to change without notice. Accordingly, the latest specifications for the
machine may not be found in this document. As new information becomes
available, this document will be revised. Canon authorized dealers can access the
latest revision of this document from the Download Center page on the e-Support
Web site (support.cusa.canon.com).
DISCLAIMER
NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE
PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE
(UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON
OR ANY AUTHORIZED SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT,
FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR
SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA,
INCLUDING, WITHOUT LIMITATION, DATA STORED ON THE PRODUCT’S HARD
DISK DRIVE, STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE
CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY
AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON
OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER
ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO
PERSONS AND THE PROPERTY OF THE PURCHASER OR OTHERS ARISING
OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT
NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR
ANY AUTHORIZED SERVICE PROVIDER.
Copyright 2017 by Canon U.S.A., Inc. All rights reserved.
Product and company names used herein are, or may be, the registered trademarks or
trademarks of their respective owners.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 6
1. Introduction
The Canon varioPRINT 120 Customer Expectations Document contains
information about the features and capabilities of the Canon varioPRINT 120. This
document should be used as part of the presale and preinstallation planning
processes to help clarify the requirements and responsibilities associated with
supporting, owning, and operating the Canon varioPRINT 120. It is also
recommended that those interested in purchasing the Canon varioPRINT 120 have,
and familiarize themselves with, the information in this document prior to making
their purchase.
Version 13 introduces new PRISMAsync R5.2 features and specifications.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 7
2. Product Overview
The Canon varioPRINT 120 brings the following capabilities to users in a
high-volume, light- to mid-production office environment, including commercial
printers, Print-for-Pay, graphic arts, and CRD customers:
•Printing/copying speeds of up to 120 ipm (images-per-minute)1(Duplex, LTR,
and B&W (Black-and-White)).
•One integrated 15” full-color touch screen operator panel for the total system.
•One media catalog for the total system.
•Prints up to 600 x 2,400 dpi (dots per inch). This results in higher quality
characters, smoother corners, and cleaner gradient transitions. Text appears
sharper, and graphics appear clear and detailed.
•Copies up to 600 x 1,200 dpi.
•Scans in up to 600 x 600 dpi.
•Dust-free toner filling and no waste toner or ozone is generated.
•Vacuum feed, air separation, HeatXchange technology, ScreenPoint technology,
DirectPress technology, and EnergyLogic technology ensure reliable media
handling from up to 14 lb bond to 110 lb cover (50 to 300 g/m2).
•PRISMAsync controller offers optional scheduling feedback software for
production planning on the user interface for up to 8 hours.
•Optional operator’s attention light with adjustable “warn-ahead” timing.
•POC (Printer Operation Care) enables the operator to safely replace certain parts,
increasing uptime.
•Support for the optional SDD BLM300C Professional Booklet Maker and bulk
paper tray for A5 and Statement size paper.
IMPORTANT
•Friction fed finishing is not recommended due to the risk of slight toner abrasion.
•When running certain applications, which contain large areas of heavy coverage
of solid black toner, the user may observe some minor density changes from the
lead edge to trail edge on the print.
1 An image is defined as any text, graphics, or combination of the two, that fits onto one side of a single sheet (or
page) of LTR paper. Therefore, a printing/copying speed of approximately 120 ipm in the duplex mode equates
to approximately 60 ppm (pages-per-minute).

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 8
2.1 Summary of Functions
Function
Canon varioPRINT 120
Print Speed (LTR) B&W 120 ipm
Scan Speed
(300 dpi, LTR)
Simplex,
B&W and Color
2
Up to 120 ipm
Duplex,
B&W and Color
2
Scan Speed
(600 dpi, LTR)
Simplex,
B&W and Color
2
Up to 100 ipm
Duplex,
B&W and Color
2
Up to 25 ipm
Scan Speed
(600 x 300 dpi, LTR)
Simplex,
Duplex, and
Color
2
Up to 105 ipm
DADF
Standard duplex automatic document feeder
DADF Capacity
300 sheets (20 lb bond (80 g/m²))
Print Resolution
Up to 600 x 2,400 dpi
Copy Resolution
Up to 600 x 1,200 dpi
Scan Resolution
Up to 600 x 600 dpi
Gradations
200 levels
Paper Size
Minimum
5.5” x 7.2” (140 mm x 182 mm)
Maximum
12.6” x 19.2” (320 mm x 488 mm)
Paper Weight 13 lb bond to 110 lb cover (50 to 300 g/m²)
Maximum Printable Area
12.1” x 19.1” (308 mm x 484 mm)
Controller
Standard PRISMAsync Controller
Controller HDD Capacity
160 GB
Controller Memory
2 GB
Security
Optional with E-Shredding license enabled on the
PRISMAsync controller
Copy
Standard
Scan
Standard for B&W2
Print
Standard
Network
Standard Ethernet 10/100/1000 Base-TX
2.2 Offset Press vs. DirectPress
Offset printing is a technique that transfers (or “offsets”) an inked image from a
plate to a rubber blanket, and then to the printing surface. This enables the offset
press to maintain a consistent and high-image quality over long print runs because
the plate never touches the paper. The process requires a substantial investment
in equipment and setup expenses to achieve these results.
DirectPress converts digital data into a toner image in a single step. This compact
process is unaffected by temperature, static, or humidity. Therefore, it offers stable
performance and no deterioration in quality, while producing no ozone or waste
toner.
2 To scan in color, the optional Color Scan to File/E-Mail-C1 license must be installed.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 9
2.3 Standard Configuration
The standard configuration for the Canon varioPRINT 120 includes:
•Canon varioPRINT 120 main unit
•Duplex Color Image Reader Unit-D1
•Operator panel
•PRISMAsync controller (embedded in the main unit)
•Ethernet connection (via the PRISMAsync controller)
•USB connection (via the operator panel)
IMPORTANT
The customer must purchase the Canon varioPRINT 120 Base License V2 with
or without POC (Printer Operation Care). For more information on POC, see
“Printer Operation Care,” on p. 58.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 10
2.4 PRISMAsync Controller
The Canon varioPRINT 120 is powered by the PRISMAsync Print Controller.
The PRISMAsync controller seamlessly enables the customer to streamline their
workflow and turn out more work in less time with the following features:
•Scheduler - Plan-ahead functionality for multiple jobs simultaneously. The
scheduler only shows an estimated job completion time, not the actual time it
may take to complete a job. The actual job completion time may vary, depending
on mixed media jobs, mixplex jobs, selected Finishing settings, and color
adjustments.
•One queue and job management for printing and copying.
•Streaming (spooling, RIPing, printing, and cleaning up simultaneously).
•Multi-tasking (print, copy, and scan).
•JDF (Job Definition Format) connector compatible.
•Multiple standard and customizable workflow profiles.
•Media-based operation with PRISMA media catalog.
•PRISMAsync controller settings are accessible via a Web browser using the
Settings Editor.
•DocBox (optional) for advanced job editing.
•Scan to SMB – enables users to scan to a shared network drive.
•Support for scanning to multiple e-mail addresses.
•Remote Manager
•Copy To
•Search Functions in Settings Editor
•Point & Print

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 11
2.4.1 New PRISMAsync R5.2 Features
The upgraded PRISMAsync controller has the following new features:
•Account Record per Month – This feature works with the current accounting
license, and enables the customer to download their account records in
monthly batches.
•PRISMAlytics Dashboard – Collects production data, such as engine use and
production output, directly from the engine, and presents a comprehensive
overview for the operator.
•IPP Release Job Command – Enables the customer to use the IPP
communication protocol to release jobs from the waiting queue.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 12
2.4.2 PRISMAsync Standard Software
This section describes the standard software that comes with PRISMAsync R5.2.
•Scheduler
•DocBox
•Page Programmer
•Remote Viewer
•Remote Manager
•Multiple Queue
•Scan-to-File
•PostScript and PDF
•Streaming
•Accounting
•Advanced Color Management
•Trapping
•PPML
2.4.3 PRISMAsync Optional Software
This section describes optional software packages that are licensed separately
for the PRISMAsync controller.
•E-Shredding
•Integrity Checker
•DPLink
•PRISMAprepare
•PRISMAdirect
•PRISMAlytics
IMPORTANT
E-Shredding has an impact on product performance. Depending on the
E-Shredding settings (number of overwrites) and the complexity of the
processed job data, an impact of 10% to 40% can be expected on product
performance.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 13
2.4.4 PRISMAsync System Backup
To backup the PRISMAsync system settings and licenses, a technician must use
the USB key included in the PRISMAsync box.
To backup the PRISMAsync’s firmware, a technician must use a specific type of
USB stick (available for purchase), as described in “USB Stick,” on p. 30.
The USB key and USB stick are the same types of physical hardware (flash
drives); however, they are both used for different purposes.
It is strongly recommended that technicians make a backup of the system after
installation, major system changes, or upgrades on the provided USB key.
The USB key must be left with the PRISMAsync controller.
2.4.5 PRISMAsync Firmware Updates
It is recommended that a technician use a specific kind of USB stick to upgrade
or restore the PRISMAsync controller firmware. The USB stick is NOT included in
the PRISMAsync box.
The USB stick used for upgrading the controller firmware must adhere to specific
technical requirements. For the USB stick’s technical requirements, see
“USB Stick,” on p. 30.
IMPORTANT
•Before downloading new firmware on the USB stick, the USB stick must be
formatted (all contents on the stick erased). During the firmware update
process, the current firmware on the PRISMAsync controller is erased and
replaced by the newly installed firmware. Therefore, it is highly recommended
that the technician backup the PRISMAsync system settings and licenses on
the USB key first. Then, after the firmware is updated (using the USB stick), the
installed licenses and settings can be restored using the USB key.
•Once the USB stick has been used to update firmware on the PRISMAsync
controller, it cannot be used again until the format process is repeated.
•The USB key and USB stick should not be used interchangeably.
•Using a USB stick that does not meet the specific technical requirements, may
result in an error when backing up the system settings or an error when
installing firmware.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 14
2.5 Professional Input/Output Accessories
The Canon varioPRINT 120 features many input and output accessories that allow
customers working in office environments to complete large jobs directly from the
machine. For more information on the input and output accessories that can be
attached to the machine, see “Specifications,” on p. 27.
Input Accessories
•Duplex Color Image Reader-D1 (standard)
•Color Image Reader-J1 (standard with the printer only model) (requires
PRISMAsync Firmware Version 3.2.x)
•ePIM-C1 (external Paper Input Module) (optional)
•Bulk Tray Small Format (Installs in Engine Trays 1 and 2)
Optional Finishing (Output) Accessories
•Document Insertion Unit-F1
•High Capacity Stacker-E1
•High Capacity Stacker-G1
•Paper Folding Unit-F1
•Finisher-AK1
•Saddle Finisher-AK2
•Puncher Unit-BS1 (Internal to the Finisher-AK1 or Saddle Finisher-AK2)
•Professional Puncher-B1 with Professional Puncher Integration Unit-A1
•Booklet Trimmer-D1
•Two-Knife Booklet Trimmer-A1
•SDD (Smart Dedicated Design) Square Fold Booklet-Maker with Two-Knife
Trimmer
•SDD Square Fold Booklet-Maker
•PowerLift
•Decurler Unit-A1 (Requires PRISMAsync Firmware Version 3.2.x)
•MAX Ring Binder (Requires the High Capacity Stacker-G1)
•SDD BLM300C Professional Booklet Maker (Requires the High Capacity
Stacker-G1 and PRISMAsync Firmware Version 3.3)

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 15
IMPORTANT
•Some type of finishing option (Finisher-AK1, Saddle Finisher-AK2, High Capacity
Stacker-E1, or High Capacity Stacker-G1) is required. The Finisher-AK1 cannot
be installed with the Saddle Finisher-AK2, and the High Capacity Stacker-E1
cannot be installed with the High Capacity Stacker-G1.
•The Duplex Color Image Reader-D1 and Color Image Reader-J1 cannot be
installed together.
•The Two-Knife Booklet Trimmer-A1 and SDD Square Fold Booklet-Maker with
Two-Knife Trimmer cannot be installed together.
•The Booklet Trimmer-D1 requires the Saddle Finisher-AK2.
•The Two-Knife Booklet Trimmer-A1 requires the Booklet Trimmer-D1 and Saddle
Finisher-AK2.
•The SDD Square Fold Booklet-Maker with Two-Knife Trimmer requires the
Booklet Trimmer-D1.
•The SDD Square Fold Booklet-Maker requires the Booklet Trimmer-D1.
•The Paper Folding Unit-F1 requires the Finisher-AK1 or Saddle Finisher-AK2.
•Two High Capacity Stacker-E1s can be attached to the machine at once.
•Two High Capacity Stacker-G1s can be attached to the machine at once.
•The PowerLift is used only with the High Capacity Stacker-G1.
•The SDD BLM300C Professional Booklet Maker requires the High Capacity
Stacker-G1 and the DFD 1,002 mm Kit, has several options that enhance the
booklet maker’s finishing system, such as a 2-knife trimmer and square fold
device, and the BLM300C finishing system must be the final in-line accessory
attached to the machine.
•The only accessories that can be attached to the machine after the MAX Ring
Binder are the Canon Finisher-AK1 or Saddle Finisher-AK2, Booklet Trimmer-D1,
and Two-Knife Booklet Trimmer-A1. These options require pedestals to make the
feeding slots of the finishing accessories even with the output slot of the MAX
Ring Binder.
•The Decurler Unit-A1 must be attached immediately after the engine.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 16
3. Machine Dimensions and Space Requirements
3.1 Dimensions
The following table includes the approximate width, height, and depth dimensions
(in inches and millimeters) of the main unit and optional accessories.
Unit
Width
Depth
Height
Main Unit without
Operator Panel
44.5” 1,130 mm 30.1” 765 mm 40.9” 1,040 mm
Main Unit with Operator Panel
44.5”
1,130 mm
30.1”
765 mm
56.3”
1,430 mm
Duplex Color Image
Reader-D1
24.9” 633 mm 23.1” 588 mm 7.0” 179 mm
ePIM-C1
38.6”
980 mm
29.5”
750 mm
40.9”
1,040 mm
Document Insertion Unit-F1
27.6”
701 mm
31.2”
793 mm
55.0”
1,397 mm
High Capacity Stacker-E1
39.3”
997 mm
31.1”
792 mm
53.6”
1,362 mm
High Capacity Stacker-E1+
Secondary High Capacity
Stacker-E1
78.7”31,999 mm331.1” 792 mm 53.6” 1,362 mm
High Capacity Stacker-G1
35.4”
899 mm
29.3”4
745 mm4
40.9”
1, 040 mm
High Capacity Stacker-G1+
Secondary High Capacity
Stacker-G1
71.0”31,803 mm329.3”4745 mm449.9” 1,040 mm
Paper Folding Unit-F1
13.2”
336 mm
31.2”
793 mm
46.9”
1,190 mm
Finisher-AK1
31.3”5
800 mm5
31.1”
792 mm
48.8”
1,239 mm
Saddle Finisher-AK2
31.3”6
800 mm6
31.1”
792 mm
48.8”
1,239 mm
Puncher Unit-BS1
Internal
Professional Puncher-B1 with
Professional Puncher
Integration Unit-A1
22.0” 560 mm 31.1” 792 mm 40.9” 1,040 mm
Booklet Trimmer-D17
62.0”
1,575 mm
30.3”
770 mm
40.9”
1,040 mm
Two-Knife Booklet
Trimmer-A1
8
21.1” 536 mm 30.3” 770 mm 40.9” 1,040 mm
Two-Knife Booklet
Trimmer-D18+ Booklet
Trimmer-D1
7
83.3”32,116 mm330.3” 770 mm 40.9” 1,040 mm
Booklet Trimmer-D17+ Saddle
Finisher-AK2
93.7”32,380 mm331.1” 792 mm 48.8” 1,239 mm
Two-Knife Booklet
Trimmer-A18+ Booklet
Trimmer-D17+ Saddle
Finisher-AK2
115.0”3, 6 2,921 mm3, 6 31.1” 792 mm 48.8” 1,239 mm
Square Fold Booklet-Maker &
Two-Knife Trimmer
9
62.7” 1,592 mm 27.6” 700 mm 51.2” 1,300 mm
Square Fold Booklet-Maker9
43.3”
1,100 mm
23.6”
600 mm
44.9”
1,140 mm
PowerLift
21.0”
530 mm
33.0”
850 mm
60.0”
1,520 mm
Decurler Unit-A1
9.8”
250 mm
31.2”
793 mm
40.9”
1,040 mm
3 The width includes one 1/5” (5 mm) gap between each piece of equipment attached.
4 When the eject tray is extended, the depth is 49.2” (1,250 mm).
5 When the extension tray is pulled out, the width is 35.1” (890 mm).
6 When the auxiliary booklet tray is pulled out, the width is 41.7” (1,060 mm).
7 With the conveyor section and delivery tray.
8 Without the conveyor section and delivery tray.
9 Square Fold Booklet-Maker Conveyor Tray is fully extended.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 17
Machine Dimensions Table Continued
Unit
Width
Depth
Height
MAX Ring Binder
33.9”
260 mm
25.8”
655 mm
43.8”
1,113 mm
Pedestal-A1
26.75”
678 mm
31.5”
800 mm
5.0”
127 mm
Extension for Pedestal-A1
8.0”
203 mm
30.5”
775 mm
4.0”
102 mm
Ramp for Pedestal-A1
25.0”
635 mm
9.4”
238 mm
5.5”
140 mm
SDD BLM300C Professional
Booklet Maker
35.8” 910 mm 27.6” 700 mm 45.3” 1,150 mm
SDD Front Trimmer
BLT6989
14.2” 360 mm 23.6” 600 mm 43.3” 1,100 mm
SDD 2-Knife Trimmer
STR6702
23.6” 600 mm 27.6” 700 mm 43.3” 1,100 mm
SDD Square Fold SFM6904
14.2”
360 mm
23.6”
600 mm
43.3”
1,100 mm
SDD Rotator RTM6940
26.8”
680 mm
26.4”
670 mm
43.3”
1,100 mm
SDD Long Belt Stacker
BST6800
61.8” 1,570 mm 17.7” 450 mm 29.9” 760 mm
SDD Short Belt Stacker
BST6900
32.3” 820 mm 17.7” 450 mm 29.9” 760 mm

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 18
3.2 Weight
The approximate weights of the main unit, feeding and finishing options (in pounds
and kilograms) are listed in the table below.
Unit
Weight
Main Unit
580 lb
263 kg
Operator Panel
7.5 lb
3.4 kg
Operator Attention Light-C1
3 lb
1.4 kg
Duplex Color Image Reader-D1
59 lb
27 kg
ePIM-C1
441 lb
200 kg
Document Insertion Unit-F1
122 lb
55 kg
High Capacity Stacker-E1
463 lb
210 kg
High Capacity Stacker-G1
264.6 lb
120 kg
Paper Folding Unit-F1
144 lb
65 kg
Finisher-AK1
287 lb
130 kg
Saddle Finisher-AK2
397 lb
180 kg
Puncher Unit-BS1
6.7 lb
3 kg
Professional Puncher-B1 with Professional Puncher
Integration Unit-A1
258 lb 117 kg
Booklet Trimmer-D18
335 lb
152 kg
Two-Knife Booklet Trimmer-A18
319 lb
145 kg
Square Fold Booklet-Maker & Two-Knife Trimmer
573 lb
260 kg
Square Fold Booklet-Maker
154 lb
70 kg
PowerLift
80 lb
36 kg
Decurler Unit-A1
99.2 lb
45 kg
MAX Ring Binder
330 lb
150 kg
Pedestal-A1
49.5 lb
22.5 kg
Extension for Pedestal-A1
6.5 lb
3 kg
Ramp for Pedestal-A1
21 lb
9.5 kg
SDD BLM300C Professional Booklet Maker
363.8 lb
165 kg
SDD Front Trimmer BLT6989
187.4 lb
85 kg
SDD 2-Knife Trimmer STR6702
451.9 lb
205 kg
SDD Square Fold SFM6904
143.3 lb
65 kg
SDD Rotator RTM6940
286.6 lb
130 kg
SDD Long Belt Stacker BST6800
55 lb
25 kg
SDD Short Belt Stacker BST6900
44 lb
20 kg
8 Without the conveyor section and delivery tray.

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 19
3.3 Dimensions Diagrams
The installation site must provide enough space for unrestricted operation,
maintenance work, and proper ventilation. Every attempt should be made to install
the equipment in a room that is large enough for the proper servicing and
maintenance of the equipment, and ensure that issues, such as ventilation, odors,
and dust accumulation are not a concern.
Two-Knife Booklet
Trimmer-A1
Approximately 44”
Booklet Trimmer-D1
Approximately 33
1/8”
Finisher-
AK1
Saddle
Finisher-
AK2
Approx.
31 1/2”
Paper
Folding
Unit
-
F1
Approx
.
13.2”
High Capacity
Stacker-E1
Approximately
39 1/4”
High Capacity
Stacker-E1
Approximately
39 1/4”
Professional
Puncher-B1 &
Integration
Unit-A1
Approximately
22”
Doc.
Insertio
n Unit-
F1
Approx.
13 1/4”
Decurle
r Unit –
A1
Approx.
9.8”
Main Unit
Approximately
44 1/2”
ePIM-C1
Approximately 39 5/8”
Approximately 83 1/4”
High Capacity
Stacker-G1
Approximately
35 5/8”
High Capacity
Stacker-G1
Approximately
35 5/8”
Approximately 317.2” (8,057 mm) (with the High Capacity Stacker-E1)
Approximately 309.6” (7,864 mm) (with the High Capacity Stacker-G1)
Approx. 31.2”
Provide at least 31” behind, 39.4” around the left
side, 23.6” around the right side, and 55” around
the front of the machine (with all doors and
access panels open).
Approx.
69.9”
Approx.
40.9”

varioPRINT 120 Customer Expectations Document
Version 13 varioPRINT 120 Customer Expectations Document Page 20
MAX Ring Binder with Additional Finishing Accessories Downstream
MAX Ring Binder Configured Without Additional Accessories Downstream