Canon 7215 - LV XGA LCD Projector User manual

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
LV-5210/7215/7210
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATION
Page1

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
CONTENTS
1. Overtview
2. Serial Interface Specification
2.1 Communication Specification
2.2 Connection
3. Note for communications
4. Name Definition
5. Functional Execution Command table
5.1 Image Command Table
5.2 PC Control Command Table
5.3 VIDEO Control Command Table
5.4 Input Control Command Table
5.5 Screen Command Table
5.6 Lamp Command Table
5.7 Sound Command Table
5.8 Setting Command Table
6. Status Read Command Table
6.1 IMAGE Status Read Command table
6.2 PC Status Read Command Table
6.3 VIDEO Status Read Command Table
6.4 Input Status Read Command Table
6.5 Screen Status Read Command Table
6.6 Lamp Status Read Command Table
6.7 Sound Status Read Command Table
6.8 Setting Status Read Command Table
6.9 Other Status Read Command Table
7. Error Code Table
8. Functional Execution Command
8.1 Format
8.2 Transfer Example
8.3 Operation Requirements
8.4 Image Command
8.4.1 CF_BRIGHT COMMAND
8.4.2 CF_CONT COMMAND
8.4.3 CF_COLOR COMMAND
8.4.4 CF_TINT COMMAND
8.4.5 CF_SHARP COMMAND
8.4.6 CAMMA COMMAND
Page2

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.4.7 WBAL COMMAND
8.4.8 COLTEMP COMMAND
8.4.9 PROGV COMMAND
8.4.10 IMGE COMMAND
8.4.11 CF IMAGE ADJ COMMAND
8.5 PC Control command
8.5.1 CF_FSYNC COMMAND
8.5.2 CF_TDOTS COMMAND
8.5.3 CF_CLAMP COMMAND
8.5.4 CF_H-POS COMMAND
8.5.5 CF_V-POS COMMAND
8.5.6 CF_DDOTS COMMAND
8.5.7 CF_DLINE COMMAND
8.5.8 CF_PC STORE COMMAND
8.5.9 CF_PC MODE FREE COMMAND
8.6 VIDEO Control Command
8.6.1 CF_AVDDOTS COMMAND
8.6.2 CF_AVDLINECOMMAND
8.6.3 CF_AVHPOS COMMAND
8.6.4 CF_AVVPOS COMMAND
8.6.5 CF_AVSERV COMMAND
8.7 Input Control Command
8.7.1 CF_INPUT COMMAND
8.7.2 CF_SOURCE COMMAND
8.7.3 CF_INPUT_%1_%2 COMMAND
8.7.4 CF_SYSTEM COMMAND
8.8 Screen Control Command
8.8.1 CF_SCREEN COMMAND
8.8.2 CF_FLSCREN COMMAND
8.8.3 CF_UE COMMAND
8.8.4 CF_CENT COMMAND
8.8.5 CF_KEYSTONE COMMAND
8.8.6 CF_KYSTNMODE COMMAND
8.9 Lamp Command
8.9.1 CF_LAMOPH COMMAND
8.9.2 CF_ALMP MODE COMMAND
8.10 Sound Command
8.10.1 CF_VOLUME COMMAND
8.10.2 CF_MUTE COMMAND
Page3

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.11 Setting Command
8.11.1 CF_BBACK COMMAND
8.11.2 CF_DISPCOMMAND
8.11.3 CF_LOGOCOMMAND
8.11.4 CF_CEILCOMMAND
8.11.5 CF_REARCOMMAND
8.11.6 CF_RCODE COMMAND
8.11.7 CF_LANGCOMMAND
8.11.8 CF_ON-STACOMMAND
8.11.9 CF_P-MANECOMMAND
8.11.10 CF_P-MANETIMECOMMAND
8.11.11 CF_FANSPEEDCOMMAND
8.11.12 KEYDISCOMMAND
8.11.13 TERMINALCOMMAND
8.11.14 STANDBYMODEOCOMMAND
8.11.15 POINTERCOMMAND
8.11.16 FDEFAULTCOMMAND
8.11.17 LOGOCAPTURECOMMAND
9. Status Read Command
9.1 Format
9.2 Transfer Example
9.3 Operation Requirement
9.4 IMAGE COMMAND
9.4.1 CR-BRIGHTCOMMAND
9.4.2 CR-CONTCOMMAND
9.4.3 CR-COLORCOMMAND
9.4.4 CR-TINTCOMMAND
9.4.5 CR-SHARPCOMMAND
9.4.6 CR-GAMMACOMMAND
9.4.7 CR-WBAL-RCOMMAND
9.4.8 CR-WBAL-GCOMMAND
9.4.9 CR-WBAL-BCOMMAND
9.4.10 CR-COLTEMPCOMMAND
9.4.11 CR-PROGVCOMMAND
9.4.12 CR-IMAGECOMMAND
9.4.13 CR-IMGGMD COMMAND
9.5 PC COMMAND
9.5.1 CR-FSYNC COMMAND
9.5.2 CR-TDOTS COMMAND
Page4

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
9.5.3 CR-CLAMP COMMAND
9.5.4 CR-H-POS COMMAND
9.5.5 CR-V-POS COMMAND
9.5.6 CR-DDOTS COMMAND
9.5.7 CR-DLINECOMMAND
9.5.8 CR-PC STORECOMMAND
9.5.9 CR-SET PC ADJ COMMAND
9.6 Video Command
9.6.1 CR_SERSYSCOMMAND
9.7 Input Command
9.7.1 CR-INPUTCOMMAND
9.7.2 CR-COURCECOMMAND
9.7.3 CR-INPUT_%1COMMAND
9.7.4 CR-SYSTEMCOMMAND
9.8 Screen Command
9.8.1 CR-SCREENCOMMAND
9.8.2 CR-FLSCRENCOMMAND
9.8.3 CR-TRUECOMMAND
9.8.4 CR-KYSTONMODECOMMAND
9.9 Lamp COMMAND
9.9.1 CR_LAMPREPLCOMMAND
9.9.2 CR-LAMPMODECOMMAND
9.9.3 CR-PROJECOMMAND
9.10 Sound Status COMMAND
9.10.1 CR-VOLUMECOMMAND
9.10.2 CR-MUTECOMMAND
9.11 Setting Status COMMAND
9.11.1 CR-BBACKCOMMAND
9.11.2 CR-DISPCOMMAND
9.11.3 CR-RCODECOMMAND
9.11.4 CR-LANGCOMMAND
9.11.5 CR-ON-STACOMMAND
9.11.6 CR-P-MANE COMMAND
9.11.7 CR-P-MANETIMECOMMAND
9.11.8 CR-FANSPEEDCOMMAND
9.11.9 CR-KEYDISCOMMAND
9.11.10 CR-TERMINALCOMMAND
9.11.11 CR-STANDBYMODECOMMAND
9.11.12 CR-POINTERCOMMAND
Page5

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
9.12 Other Status Read Command
9.12.1 CR-SIGNAL COMMAND
9.12.2 CR-VMUTECOMMAND
9.12.3 CR-FREEZECOMMAND
9.12.4 CR-PTIMERCOMMAND
9.12.5 CR-TEMPWARNCOMMAND
9.12.6 CR-TEMPFAILCOMMAND
Page6

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
1 Outview
1.1 This Functional Specification defines communication functions such as Wireless Imager for
LV-5210/7215/7210.
1.2 The Projector Firmware Ver.1.x-ready.
1.3 Commands are to communicate to such as Wireless Imager, but most commands control a
remote projector with PC installed RS232C. That’s why commands are defined as expand
serial commands
2 Serial Interface Specification
2.1 Communication Specification
Specification
Synchro System Asynchronou
Transmission
S
p
eed 9600 / 19200
Data Length 8 bit
Parity N/A
Stop Bit 1
Flow Control N/A
Note1) transfer rate: initial setting value is 19200
Note2) transfer rate can be changed by service MODE
2.2 Connection
Must use a dedicated serial cable that come with the projector for a connection to a
COMPUTER and a projector.
PC Projector
COM No.1 Control Port
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
CD
SG
RXD
TXD
DTR
DSR
RTS
CTS
RING
(D-Sub9Pin) (MiniDIN8Pin)
Page 7

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
3 Note for communications
3.1 The expand command is defined one Command/one line that starts ”C” and ends carriage
return (0x0D)
3.2 When a projector receives carriage return (0x0D), it starts decoding.
-Functional Execution
(Ex.) ”CF_BRIGHT_032” [CR]
-Status Read Command
(Ex.) “CR_RIGHT” [CR] Note) _means a space
3.3 When it takes more than one second to receive one Command, it does not execute the Command.
Since the projector has received the first data “C”, when it takes more than 1 second until the
projector receives a carriage return (0x0D), it clears information of buffer.
3.4 When a COMPUTER keeps sending some Command, it must wait sending next command after
100ms when the COMPUTER receives the return command.
More than 100ms
Command
PC Projector “CF_BRIGHT_032”CR Next Command
Projector PC “000” CR
Response
(A few ms -- 5s)
3.4.1 When a COMPUTER sends next command before receiving a return command, the
projector may not operate properly.
3.4.2 Except no response after 5 seconds
3.5 It takes about 5 seconds for internal initialization after plugging in AC. During this time it
cannot process command. Do not issue any commands.
4 Name Definition
4.1 Data from a controller to a projector is represented as COMMAND, and data from a projector to
a controller for the incoming command is represented as RESPONSE.
4.2 [CR]: Carriage Return Code
The Command ends carriage return code. Also response Command ends carriage return, too.
4.3 : Space Code
All space Code is indicated by (_).
4.4 %1: Parameter in Command
When there are some parameters, the parameters are defined as %2, %3…
4.5 %%%: Error Code from a projector
“000”: Normal Reception
See “ 7.Error Code Table “ for error number.
4.6 %a : Parameter for response from a projector
When there are a few parameters, the parameter defines as %b, %c…
Page8

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
5 Functional Execution Command Table
5.1 Image Command Table
Execute Command Item
CF_BRIGHT_%1 [CR] Set Brightness value
CF_CONT_%1 [CR] Set Contrast value
CF_COLOR_%1 [CR] Set Color value
CF_TINT_%1 [CR] Set Tint value
CF_SHARP_%1 [CR] Set Sharpness value
CF_GAMMA_%1 [CR] Set-GAMMA value
CF_WBAL-R_%1 [CR] Set White Balance Red value
CF_WBAL-G_%1 [CR] Set White Balance Green value
CF_WBAL-B_%1 [CR] Set White Balance Blue value
CF_COLTEMP_%1 [CR] Set Color Temp. value
CF_PROGV_%1 [CR] Set or Cancel for Progressive
CF_IMAGE_%1 [CR] Set Image MODE.
CF_IMAGEADJ_%1 [CR] Reset and store for Image Adjustment.
5.2 PC Control Command Table
Execute Command Item
CF_FSYNC_%1 [CR] Set Fine Sync value.
CF_TDOTS_%1 [CR] SetTotalDotsvalue.
CF_CLAMP_%1 [CR] Set Clamp value.
CF_H-POS_%1 [CR] SetHorizontalPositionvalue.
CF_V-POS_%1 [CR] SetVerticalPositionvalue.
CF_DDOTS_%1 [CR] SetDisplayDotsvalue.
CF_DLINE_%1 [CR] SetDisplayLinevalue.
CF_PCSTORE_%1 [CR] Store e current PC Adj. Status to MODE 1, 2, 3, 4, or 5.
CF_PCMODEFREE_%1 [CR] Reset MODE1, 2, 3, 4, and 5.
5.3 VIDEO Control Command Table
Execute Command Item
CF_AVDDOTS_%1 [CR] Set AV Horizontal Resolution Value
CF_AVDLINE_%1 [CR] Set AV Vertical Resolution Value
CF_AVHPOS_%1 [CR] Set AV Horizontal Position Value.
CF_AVVPOS_%1 [CR] Set AV Vertical Position Value.
CF_AVSERV_%1 [CR]
Reset AV Horizontal /Vertical Resolution that are set in
such as CF_AVDDOTS/CF_AVDLINE to default
setting.
5.4 Input Control Command Table
Execute Command Item
CF_INPUT_%1 [CR] Select Input.
CF_SOURCE_%1 [CR] Select Input Sauce.
CF_INPUT_%1_%2 [CR] Select Input and Source.
CF_SYSTEM_%1 [CR] Select System.
Page9

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
5.5 Screen Command Table
Execute Command Item
CF_SCREEN_%1 [CR] Select Screen size.
CF_FLSCREN_%1 [CR] Set and Cancel Full Screen.
CF_TRUE_%1 [CR] Set and Cancel True for Screen.
CF_DZCENT_%1 [CR] Cancel DIGITAL zooms.
CF_KEYSTONE_%1 [CR] Set Keystone
CF_KYSTNMODE_%1 [CR] Set Keystone store MODE
5.6 Lamp Command Table
Execute Command Item
CF_LAMPH_%1 [CR] Reset lamp total running time.
CF_LAMPMODE_%1 [CR] Select lamp MODE.
5.7 Sound Command Table
Execute Command Item
CF_VOLUME_%1 [CR] Set Volume value
CF_MUTE_%1 [CR] Control Sound Mute ON/OFF
5.8 Setting Command Table
Execute Command Item
CF_BBACK_%1 [CR] Set Blue Back function.
CF_DISP_%1 [CR] Set Display function.
CF_LOGO_%1 [CR] Set Logo function.
CF_CEIL_%1 [CR] Set Ceiling function.
CF_REAR_%1 [CR] Set Rear Function.
CF_RCODE_%1 [CR] Select Remote Control Reception Code.
CF_LANG_%1 [CR] Select OSD language.
CF_ON-STA_%1 [CR] Set Power ON Start Function.
CF_P-MANE_%1 [CR] Set Power management function.
CF_P-MANETIME_%1 [CR] Set Power management time
CF_FANSPEED_%1 [CR] Select Fan Speed.
CF_KEYDIS_%1 [CR] RC//ＫＥＹ inhibit
CF_TERMINAL_%1 [CR] Set TERMINAL.
CF_STANDBYMODE_%1 [CR] Set STANDBYMODE
CF_POINTER_%1_%2 [CR] Set POINTER
CF_FDEFAULT_%1 [CR] Set Factory Default
CF_LOGOCAPTURE_%1 [CR] Capture the current image on the screen.
Page 10

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
6 Status Read Command Table
6.1 IMAGE Status Read Command Table
Status read command Item
CR_BRIGHT [CR] Get Brightness
CR_CONT [CR] Get Contrast
CR_COLOR [CR] Get Color
CR_TINT [CR] Get Tint
CR_SHARP [CR] Get Sharpness
CR_GAMMA [CR] Get-GAMMA
CR_WBAL-R [CR] White Balance Red
CR_WBAL-G [CR] White Balance Green
CR_WBAL-B [CR] White Balance Blue
CR_COLTEMP [CR] Get Color temperature setting value
CR_PROGV [CR] Get Progressive setting value
CR_IMAGE [CR] Get Selected. Image
CR_IMGGMD [CR] Get Image-GAMMA setting value
6.2 PC Status Read Command Table
Status read command Item
CR_FSYNC [CR] Get Fine Sync setting value
CR_TDOTS [CR] Get Total Dots setting value
CR_CLAMP [CR] Get Clamp setting value
CR_H-POS [CR] Get Horizontal Position setting value
CR_V-POS [CR] Get Vertical Position setting value
CR_DDOTS [CR] Get Display Dots setting value
CR_DLINE [CR] Get Display Line setting value
CR_PCSTORE [CR] Get Free or Store is selected. for PC Adj.; MODE 1-5.
CR_SETPCADJ [CR] Get current PC signal for PC display status.
6.3 VIDEO Status Read Command Table
Status read command Item
CR_SERSYS [CR] Get selected. current signal. When in AUTO MODE,
it returns a result by AUTO detect.
6.4 Input Status Read Command Table
Status read command Item
CR_INPUT [CR] Get selected. input status
CR_SOURCE [CR] Get selected. input Source status
CR_INPUT_%1 [CR] Get Input and the Source.
CR_SYSTEM [CR] Get selected. system status in input MODE
6.5 Screen Status Read Command Table
Status read command Item
CR_SCREEN [CR] Get selected. screen size status
CR_FLSCREN [CR] Get Full Screen MODE
CR_TRUE [CR] Get True MODE Setting status.
CR_KYSTNMODE [CR] Get Keystone Store MODE setting status
Page 11

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
6.6 Lamp Status Read Command Table
Status read command Item
CR_LAMPREPL [CR] Get information for lamp replacement time.
CR_LAMPMODE [CR] Get lamp MODE status
CR_PROJH [CR] Get projector total running time.
6.7 Sound Status Read Command Table
Status read command Item
CR_VOLUME [CR] Get Volume value
CR_MUTE [CR] Get sound mute setting value
6.8 Setting Status Read Command Table
Status read command Item
CR_BBACK [CR] Get Blue Back setting value
CR_DISP [CR] Get Display setting value
CR_LOGO [CR] Get Log setting value
CR_RCODE [CR] Get selected. remote Control code status
CR_LANG [CR] Get selected. language.
CR_ON-STA [CR] Get ON Start setting status
CR_P-MANE [CR] Get Power management setting status
CR_P-MANETIME [CR] Get the start time for Power management
CR_FANSPEED [CR] F Get selected. FAN CONTROL SPEED
CR_KEYDIS [CR] Get ＲＣ/ＫＥＹ prohibit status.
CR_TERMINAL [CR] Get TERMINAL setting status.
CR_STANDBYMODE [CR] Get STANDBYMODE Setting Status.
CR_POINTER [CR] Get POINTER setting status.
6.9 Other Status Read Command Table
Status read command Item
CR_SIGNAL [CR] Get the status if there is signal or no signal
CR_VMUTE [CR] Get No Show setting status
CR_FREEZE [CR] Get Freeze Setting Status
CR_PTIMER [CR] Get Timer operational status
CR_TEMPWARN [CR] Get if sensors are exceeding critical temperature or not
CR_TEMPFAIL [CR] Get the temperature when sensors approached critical
temperature
Page 12

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
7 Error Code Table
Error/ode Content
? -When receives data that cannot be decoded
-Parameter determination error (digit number
error, and incorrect letter included)
000 NORMAL Reception（not error）
101 The function is not available in the selected.
MODE.
102 Selected. the value is out of range (Selected. value
will not be reflected)
103 Command mismatched to the Hardware.
(Command for unpopulated option function)
201
When sending command, the increment is
maximum value or the decrement is
minimum value.
301 Processing image capture. Re-try it again later.
303 Processing Memory Card Viewer. Re-try it again
later.
Page 13

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8 Functional Execution Command
8.1 Format
１. The following format’s commands issued form a PC
Pattern1:”CF_COMMAND” [CR]
Pattern2:”CF_COMMAND_%1” [CR]
CF_:Header
COMMAND:Letters
%1:Parameter(Letters)
_:Space（To separate COMMAND and parameter）
２. When a projector decoded a received data and ready to receive the next Command, it
will return acknowledgment.
“000” [CR]:（0x06,0x0D）When received Function Execute Command
“nnn” [CR]:Unable to execute any value except “000” value for any specific reason.
See the Ode/ode for its contents
３. When received an undecodable data
Returns”?” [CR]
8.2 Transfer Example
When setting projector total command to 1344 by expand command
PC PJ:”CF_TDOTS_1344”[CR]
PC PJ :”000” [CR] ---------------- Reception OK
8.3 Operation Requirements
When the functional execution command is limited, the projector sends an error command
as shown in the table below.
Projector Status Available Function Execution Command
STANDBYMODE C00:POWER ON
Processing Count Down C00:POWER ON
(Terminate Count Down)
Processing Cooling Down N/A
Cooling Down due to abnormal
temperature
N/A
Abnormal Temperature N/A
Abnormal Power
(60sECOnds after Power has turned to
abnormal)
N/A
Processing Power Save Cooling Down N/A
Processing Power Save C00:POWER ON
C01:POWER OFF
Note): When the projector receives other commands in the above status, they return error
code to show the status.
Page 14

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.4 IMAGE Command
8.4.1 CF_BRIGHT Command
COMMAND “CF_BRIGHT_%1” [CR]
%1
“000-063”------ Directly select the Bright Setting Value
“UP”---------------- Bright setting value +1
“DN”---------------- Bright setting value -1
Details
Set the User control Bright Value
The value set by the command will not be saved to the projector. Therefore,
when ALL OFF the projector, the value will return to the original setting.
(For STANDBYMODE, this value stays.) Only valid when it is in the usual
Power ON State.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.2 CF_CONTCOMMAND
COMMAND “CF_CONT_%1” [CR]
%1
“000-063”------ Directly select for conntrast setting value
“UP”---------------- Contrast setting value
“DN”---------------- Contrast setting value-1
Details
Set the user Control contrast value.
The value set by this command will not be saved to the projector. Therefore,
when ALL OFF the projector, the value will return to the original setting
(For STANDBYMODE, this value stays.) Only valid when it is in the usual
Power ON status.)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.3 CF_COLORCOMMAND
COMMAND “CF_COLOR_%1” [CR]
%1
“000-063”------ Directly Color setting value
“UP”---------------- Color setting value+1
“DN”---------------- Color setting value-1
Details
Set the user Control Color value.
The value set by this command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For STANDBYMODE, this value stays.) Only valid when it is in
the usual Power On state.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
Page 15

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.4.4 CF_TINTCOMMAND
COMMAND “CF_TINT_%1” [CR]
%1
“000-063”------ Directly select for Tint setting value
“UP”---------------- Current Setting value +1
“DN”---------------- Current Setting value-1
Details
Set the user Control tint value.
The value set by this command will not be save to the projector. Therefore,
when ALL OFF the projector, the value will return to the original setting.
(For STANDBYMODE, this value stays.) Only valid when it is in the
NORMAL Power ON state.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.5 CF_SHARPCOMMAND
COMMAND “CF_SHARP_%1” [CR]
%1
“000-015”------ Directly select for Gamma setting value
“UP”---------------- Current Sharpness setting value＋1
“DN”---------------- Current_Sharpnes ssetting value -1
Details
Set the user Control Sharpness value.
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For STANDBYMODE, this value stays.) Only valid when it is
the usual Power ON state.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.6 CF_GAMMACOMMAND
COMMAND “CF_GAMMA_%1” [CR]
%1
“000-015”------ Directly select for-GAMMA setting value
“UP”-----------------GAMMA setting value＋1
“DN”-----------------GAMMA setting value-1
Details
Set the User Control-GAMMA Value
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For STANDBYMODE, this value stays) Only valid when it is in
the usual Power On state.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
Page 16

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.4.7 CF_WBAL-COMMAND
COMMAND “CF_WBAL-%1_%2” [CR]
%1
“R” ------------- RED
“G” ------------- GREEN
“B” ------------- BLUE
%2
“000-063”-- Directly select color value by White Balance %1 determination
“UP”------------ Color value for White Balance %1 determination +1
“DN”------------ Color value for White Balance %1 determination -1
Details
Set the user Control value by white balance %1 determination.
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For STANDBYMODE, this value stays.) Only valid when it is in
the usual Power On state.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.8 CF_COLTEMP COMMAND
COMMAND “CF_COLTEMP_%1” [CR]
%1
“000”........ XLow
“001”........ Low
“002”…….MID
“003”........ High
Details
Set the Color Temp.（When it is in usual Power ON state, this is valid.）
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For STANDBYMODE, this value stays.) Only valid when it is in
the usual Power On state.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.9 CF_PROGV COMMAND
COMMAND “CF_PROGV_%1” [CR]
%1
“L1”------ Select Progressive MODE L1
“L2”------ Select Progressive MODE L2
“OFF”----cancel Progressive
Details
Set/Cancel for Progressive. (When it is in usual Power ON state, this is
valid.)
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For STANDBYMODE, this value stays.) Only valid when it is in
the usual Power On state.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
Page 17

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.4.10 CF_IMAGECOMMAND
COMMAND “CF_IMAGE_%1” [CR]
%1
“STAND” ----- Standard（Image adjustment is set to factory default setting
value）
“REAL” ------ High contrastl（Fixed value to display a graphic image with
natural tone.）
“CINEMA” ---- Cinema（Fixed value to focus on the tone reproduction for
movie.）
“CUSTOM1” -- Custom（the value is set and store by a user）
Details
Select an Image MODE.（When it is in usual Power ON state, this is valid.）
Parameter “CUSTOM1” is the same as selecting custom”Custom1” on OSD
menu. The value set by this Command is stored in EEEPROM. When
ALL OFF the projector the value will return to the original setting.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.11 CF_IMAGE ADJ COMMAND
COMMAND “CF_IMAGEADJ_%1” [CR]
%1 “RST”------Reset Image adjustment
“STR1”----Store current image adjustment to Image 1
Details
Reset or Store for image adjustment. (When it is in usual Power ON state,
this invalid.)
“STR1” is the same as “Custom” when choosing” Store” on OSD menu. The
setting value set in “Image1” to “Custom” is stored, so even if the projector is
set to ALL OFF and is turned on again, the setting value will be able to be
back.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.5 PC Control COMMAND
8.5.1 CF_FSYNC COMMAND
COMMAND “CF_FSYNC_%1” [CR]
%1
“0000-0031”---- Directly set Fine Sync setting value
“UP”------------------ Fine Sync setting value＋1
“DN”------------------ Fine Sync setting value-1
Details
Set Fine Sync for PC signal（Only valid when it is in the usual Power ON
status.)
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting.
（STANDBYMODE stays.）
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input is-VIDEO
Page 18

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.5.2 CF_TDOTS COMMAND
COMMAND “CF_TDOTS_%1” [CR]
%1
“nnnn-9999”-- Directly set Total Dots value
“nnnn” is minimum value.
This is current Display Dots value＋Horizontal position value
“UP”---------------- Total Dots setting value ＋1
“DN”---------------- Total Dots setting value-1
Details
Set Total Dots of PC signal.（Only valid when it is in the usual Power ON
status.）
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (Standby MODE stays)
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
8.5.3 CF_CLAMP COMMAND
COMMAND “CF_CLAMP_%1” [CR]
%1
“0000-0127”---- Directly set Clamp setting value
“UP”------------------ Clamp setting value ＋1
“DN”------------------ Clamp Setting value -1
Details
Set Clamp of PC signal.（Only valid when it is in the usual Power ON status.)
The value set by this Command will not be saved to the projector..
Therefore, when ALL OFF the projector, the value will return to the
original setting.
（stay in STANDBYMODE.）
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
8.5.4 CF_H-POS COMMAND
COMMAND “CF_H-POS_%1” [CR]
%1
“0000-nnnn”-- Directly set Horizontal Position
“nnnn” means maximum value.
This result of current Total dots value-Display dots.
“UP”---------------- Horizontal Position value ＋1
“DN”---------------- Horizontal Position value-1
Details
Set horizontal position of PC signal.（Only valid when it is in the usual Power
ON status.）
This value set by this Command will not be save do the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (stays in STANDBYMODE)
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
Page 19

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.5.5 CF_V-POS COMMAND
COMMAND “CF_V-POS_%1” [CR]
%1
“0000-nnnn”-- Directly set Vertical Position
“nnnn” means maximum value.
This value is from current Total Line value – display
Line value.
“UP”---------------- Vertical Position setting value +1.
“DN”---------------- Vertical Position setting value-1
Details
Set vertical position of PC signal. Only valid when it is in the usual Power
ON status.) The value set by this Command will not be saved to the
projector. Therefore, when ALL OFF the projector, the value will return to
the original setting. (stays in STANDBYMODE)
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
8.5.6 CF_DDOTS COMMAND
COMMAND “CF_DDOTS_%1” [CR]
%1
“0100-nnnn”-- Directly set Display Dots value.
“nnnn” means maximum value.
This value is from current Total Dots value-Horizontal
position value
“UP”---------------- Display Dots ＋1
“DN”---------------- Display Dots -1
Details
et Display Dots of PC signal
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (stay in STANDBYMODE.)
(stays in STANDBYMODE.)
（Only valid when it is in the usual Power ON status.)
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
8.5.7 CF_DLINECOMMAND
COMMAND “CF_DLINE_%1” [CR]
%1
“0100-nnnn”-- directly specify display Line value. “nnnn” means maximum.
This value is from current Total Line value – Vertical
Position value.
“UP”---------------- Display Line ＋1
“DN”---------------- Display Line -1
Details
Set Display Line of PC signal（Only valid when it is in the usual Power ON
status.)
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (stays in STANDBYMODE.)
(stays in STANDBYMODE.)
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
Page 20