Canon 8400F - CanoScan Flatbed Scanner User manual

Canon
[anoS[an 8400F
Quick 51arl Guide
••••
••••
Windows
Install the Software )
•Scanning Film ••••••••••••••••• 'WIlIlI'IWIIIIIiaoIIIII'"
Irythe Addition.a. Featg.re•
•Using the Scanner Buttons ••••••• •
(
Unlock the Scanning Unit
) ....
.
•
(0 Connect
the Scanner )
.....
•
(Try Scanning )
....
Setup and Scanning
(Check the Package contents) •••• 'WB1iiiIY--"
•
Please read this guide before operating this scanner. After you finish reading this guide, store it in
asafe place
for future reference.

Color Image Scanner Models F910108: (CanoScan 8400F)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment
has been tested and found to comply with the limits for Class Bdigital devices, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This
equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient
or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment
into an outlet on acircuit different from that to which the receiver is connected.
•Consult the dealer
or an experienced radiolTV technician for help.
Use of shielded cable with the ferrite core provided with the scanner is required to comply with Class Blimits Subpart B of Part 15
of the FCC rules.
Do
not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A.
Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A
Tel No.(516)-328-5600
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Use of ashielded cable with the ferrite core(s) provided with the scanner is necessary to comply with the technical
requirements
of the EMC Directive.
® LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
As an ENERGY STAR Partner, Canon Inc. has determined that this model meets the ENERGY STAR Program for
energy efficiency.
The
International ENERGY STAR Office Equipment Program is an international program that promotes energy saving
through the use of computers and other office equipment. The program backs the development and dissemination of
products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can
participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, copiers,
scanners and
multifunction systems. Their standards and logos are uniform among participating nations.
•CanoScan and ScanGear are trademarks
of Canon Inc.
•Adobe and Acrobat and Photoshop are trademarks
of Adobe Systems Incorporated.
Microsoft and Windows are registered trademarks
of Microsoft Corporation in the U.S. and other countries.
•Macintosh, Power Macintosh and Mac
OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
•ScanSoft and OmniPage are trademarks
of ScanSoft, Inc.
•Other names and products
not mentioned above may be trademarks or registered trademarks of their respective companies.
In this guide, Windows XP screen shots are used to illustrate explanations common to all operating systems.

Guide to the Manuals
Guide to the Manuals
" 'c, __ ,' _"y,,_, __ ".'" .• __ ._<
Opein •••• tfle·· •. FJackag·.e
I
~c~nringGU;ide(HTI\IILf()rn1atmanual)L»L(
··Refertothisguide.whenyouhave .• fipiShedsetting.upthe scanneraccQl"diqgt()·.toe;.prode8IJres.
inthe.QuickStartGuide
.... lt·describesQQvv.t().utilize.·thescannerwith.theb.undJeds()ftwar~i
>HTML; andhowtosolv8.problems whentheyoccur.Youcan.instaILthis manual ontothe .. harddisk
together with•the.softwa
re programs~When you install it, the Scanning.GuideiconwiHappear
ohthedesktop. Double-click the icon to view it with abrowser program, such as Internet
Explorer. .
PDF
Users' Guides for Application Programs (PDF format manuals)
•ArcSoft PhotoStudio
•ScanSoft
OmniPage SE
•Presto! PageManager (Windows only)
Select the "View the Electronic Manuals" menu on the CanoScan Setup Utility CD-ROM. To
read these manuals, Adobe Acrobat Reader should be installed on your computer .
..

Check the Package Contents
Check the Package Contents
Scanner and Accessories
CanoScan 8400F Q
ACAdapter
USB Interface Cable
Film Guides
(for 35 mm film strip
and slides)
Film Guides
(for 120 format film)
Documents and Software Programs
•Quick Start Guide (this guide)
•
Additional Documents
•CanoScan Setup
Utility CD-ROM
ScanGear CS (25 MB 110MB) -Scanner Driver
It allows you to scan and load images from the scanner.
CanoScan Toolbox (15 MB 110 MB) -Scanning Utility Program
It makes it easy to scan images and save or print them as well as create e-mail attachments or PDF
files. It also works with the scanner buttons.
ArcSoft PhotoStudio (35 MB 120 MB) -Image Editing Program
It allows you to load images from the scanner, edit and retouch them, and apply special effects and
enhancements.
ScanSoft OmniPage SE (90 MB 180MB) - OCR (Optical Character Recognition) Program
It converts characters scanned from abook, magazine or newspaper into text data for editing or
digital transmission.
Presto! PageManager (Windows only) (150 MB) -Digital Document Management Program
It makes it easy to scan, share and organize documents and photos. It automatically links to other
popular programs and avoids file-sharing problems by creating self-executable files.
Adobe Acrobat Reader (25 MB 130 MB) - PDF File Reader Program
Electronic manuals
for the above software programs (HTML (10MB) and PDF m·anuals)
• Adobe Photoshop Elements CD-ROM
Adobe Photoshop Elements (135 MB 1162 MB) -Image Editing Program
It loads images from the scanner and allows you to edit and retouch them or apply special effects
and enhancements.
Please read the instruction sheet or electronic (PDF) manual for Adobe
Photoshop Elements.
-

Install the Software (Windows)
Install the Software
WindoY#s
This wizard helps you installsoflware for:
\l!hat do you want the wizard to do?
:, ',') If your hardware came with an installation CO
''--1t;;:;' or floppy disk.. inseltit now,
Welcome to the Found New
Hardware Wizard
The ScanGear CS scanner drfver (TWAIN Driver) will be
installed.
1Turn the computer on.
2Place the CanoScan Setup Utility CD-ROM in the drive.
The CanoScan Setup Utility main menu will display.
3Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
4Click [Start Installation].
You will install six software programs and the Scanning Guide
(HTML format manual).
5The installation procedure will start.
Follow the on-screen message prompts and click [Next] or [Yes]
to continue the installation.
6 When the installation is complete, click [Yes].
The computer will restart.
7 After Windows restarts, remove the CD-ROM from
the drive and store it in asafe place.
+Continue on P. 5.
\'ielcome to the Reader 5.0 Setup program. This
program will install Reader 5.0 on your computer.
It is strongly recommended that you exit all Windows programs
before running this Setup program.
Click Cancel to quit Setup and then close any programs you
have running. Click Next to continue with the Setup program.
WARNING: This program is protected by copyright law and
international treaties.
Unauthorized reproduction or distribution of this program. or an y
portion of it, may result in severe civil and criminal penalties. and
will be prosecuted to the maximum extent possible under law.

Install the Software (Macintosh)
Install the Software
1Turn the computer on.
Make sure to log in with the first created administrator to install the software. You cannot install the
software when logged in using added administrator accounts.
2Place the CanoScan Setup Utility CD-ROM in the
drive.
3Double-click the CD-ROM icon.
4Double-click the [SetUp] icon.
The CanoScan Setup Utility main menu will display.
5Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install]
window will display.
6Click [Start Installation].
You will install five software programs and the Scanning Guide
(HTML format manual).
7The installation procedure will start.
Follow the on-screen message prompts and click [Next], [Yes]
or [Install] to continue the installation.
If averification dialog appears, input the Administrator's name
and password.
8 When the installation is complete, click [Yes].
The computer will restart.
9 After restarting, remove the CD-ROM from the drive
and store it in asafe place.
-
SetUp
The ScanGear CS scanner driver (lWAlN Driver) Wfl1 be
installed.
installation was successfully completed.
To use the new software, you must restart your computer.
Click [Yes]
to restart your computer.

Unlock the Scanning Unit
Unlock the Scanning Unit
1Peel the seals off the scanner.
2 Gently turn the scanner over.
3 Push the lock switch toward the unlock mark ([}]').
~+-----+-~ Unlock Mark
Lock Switch
4Return the scanner to a horizontal position.
-

Connect the Scanner
Connect the Scanner
1 Attach the FAU cable to the FAU connector on the back of the scanner (CD).
2Connect the scanner to the computer with the supplied USB interface cable «(?).
USB Interface Cable
USB Connector
Small Square Connector
3 Attach the supplied AC adapter to the scanner.
4 Press ( I ) to turn the power on.
ID

Try Scanning
Try Scanning
The following steps explain how to scan with ArcSoft PhotoStudio.
1Place a photo or.apicture on the glass
by aligning its top edge with the
alignment mark, and close the
document cover.
Bottom
Top
Alignment
Mark
WindoVls
2Select [Start], [Programs] or [All
Programs], [ArcSoft PhotoStudio 5.5]
and [PhotoStudio 5.5].
2Double-click the [Applications] folder
followed by the [PhotoStudio] folder
and the [PhotoStudio] icon.
PhotoStudio will start.
PhotoStudio will start.
Applications
PhotoStl..JJd 10
PhotoStudlo
-

Try Scanning
3Click the [File] menu and choose [Select Source].
Select your scanner model name and click the [Select] button
for Windows or the [OK] button for Macintosh.
[Print (300 dpi)]
is selected in this example.
5Select [Select Source].
You can select from the following options.
Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document
(Grayscale).
or click the [File] menu
ScanGear CS will start.
4Click the Acquire icon
and select [Acquire].
6Click [Preview].
After calibration, the preview scan will start and gradually
display the image.
The image
is automatically cropped at its original size.
If you want to trim the image further, drag the mouse
diagonally to select the area.
7Select the [Destination].
You can select [Print (300 dpi)] or [Image display (150 dpi)].
When [Print (300 dpi)]
is selected, the output resolution is set
to 300 dpi. When [Image display (150 dpi)] is selected, it is set
to 150 dpi.

8Select the [Output Size].
You can select from the following options.
• If you selected [Print (300 dpi)] in Step 7:
Flexible / 4 II x6 II / A4 /Letter /Add/Delete
• If you selected [Image display (150 dpi)] in Step 7:
Flexible / 640 x 480 /800 x 600 / 1024 x768 /1600 x1200 /
2048 x1536 /Add/Delete
With the [Flexible] option, the scan area enclosed by the
dotted line (cropping frame) will be scanned at the same scale
as the original. You can change the cropping frame.
Other than [Flexible], you
can select the 4 II x 6 II ,A4, Letter,
and Add/Delete options. Expand
or decrease the cropping
frame
to correspond to the size of the paper for printing.
If you selected [Image Display (150 dpi)] in Step 7, you can
select
an output size in pixels to match the sizes used by
computer monitors and digital cameras.
9Click [Scan].
The final scan will start.
1OClick the close box (Windows) or
(Macintosh) in the ScanGear CS window to close it.
The scanned image will appear in the PhotoStudio window.
11 Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish
to store the image file, enter afile name,
select afile type
(JPEG format is recommended) and click
[Save].
12click close box (Windows) or (Macintosh) in
the PhotoStudio window to close it.
Try Scanning
Sample Pictures
Filename: !MyBelovedCat
Save
as lype:
-

Using the Scanner Buttons
Using the Scanner Buttons
You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily
with asingle touch of the button. Place an item on the scanner before pressing abutton.
COpy Button
SCAN Button
To print (copy) the scanned image with aprinter:
1 Press the [COpy] button.
The scanner will scan the item.
The scanned image will print.
•The printer driver should
be installed and the
printer should
be on-line to use this function.
PDF Button
To save the scanned image as a PDF file:
1 Press the [PDF] button.
The scanner will scan the item.
Multiple items can be scanned continuously.
The scanned image will
be saved as a PDF
document and appear in Presto! PageManager
(Windows) or Adobe Acrobat Reader
(Macintosh).
A
PDF (Portable Document Format) document
uses afile format that allows it to be displayed
and printed
with an application program, such
as Adobe Acrobat Reader/Adobe Reader. It is
easy to create PDF files for your images by using
the PDF button on the scanner or the PDF
button in CanoScan Toolbox.
To open the scanned image
in the PhotoStudio
window:
1 Press the [SCAN] button.
The scanner will scan the item.
The scanned image will appear in the
PhotoStudio
window.
E-MAIL Button
To attach the scanned image to a new e-mail
message:
1 Press the [E-MAIL] button.
2The [E-mail software selection] dialog
will appear. Select an option from the
list and click [OK].
This step is required only for the first scan.
The e-mail software will start and the scanned
image will
be attached in a new message
window.
The scanner will scan the item.

Scanning Film
Scanning Fillll
You can scan 35 mm film (film strip or slides) and 120 format film with this scanner.
Positioning the Film
l)se the following procedures to insert the film into the Film Guide.
1Remove the protective sheet from the document cover.
Press and hold the lever at the top of the protective sheet
while you
CD pull the sheet outward and ~ detach it.
When you finish scanning, return the protective sheet
to its original position on the document cover.

Scanning Film
120 Format Films IIII'II.lII!IIIIIII'II.lII!III IIilIIIIIflIIII_IIilIIIIIflIIIIIIilIIIIIflIIII ......... _ ... _
CDOpen the film holder on the film guide, place the film face
down and close the film holder.
~Align the Film Guide's tab with the FILM symbol on the
document
glass of the scanner.
Using aFilm Retainer Sheet
Curled film strips can stick to the document glass and cause
apattern
of rings called Newton Rings to appear on the
scanned image. If this occurs,
scan using the supplied film
retainer sheet
as shown in the diagram.
(A) Scan with the film retainer sheet inserted beneath the
film.
(8) If Newton Rings still appear after following Instruction
(A), turn the film strip over and place
it in the film holder
with the film retainer sheet on top so that the film edges
are held
down for scanning. Then preview the image in
ScanGear CS and click the [Mirror] button to reverse the
image before initiating the final scan.
3Close the document cover.
(A)
Film retainer
sheet
With its glossy side
facing upward, slip
the film retainer
sheet under the film.
(8)
Hold the film edges
down by placing
the film retainer
sheet on
top with
its glossy side facing
downward.
Film Holder
•You can purchase the Accessory Kit for CanoScan 8400F (CSAK-8400F) if the protective
sheet or Film Guides are lost or damaged.

Scanning Film
Scanning Film
The following steps explain how to scan the film with ArcSoft PhotoStudio.
1 Press the power switch on the scanner's left side to set it to the ( I ) position.
2Start ArcSoft PhotoStudio.
Refer to step 2on page 7.
3Start ScanGear CS.
Refer to step 4on page 8.
4Select the [Select Source].
You can select from the following options for firms.
Negative Film (Color) /Positive Film (Color)
5'Click [Preview].
ScanGear CS will display the preview image(s).
6Place acheck mark beside the number(s) of the
frame(s) to be scanned.
By default, acheck mark appears beside the first frame only.
You can scan multiple frames in one step
if you place acheck
mark beside the number of each frame you wish to include.
7Select the [Destination].
You can select [Print (300 dpi)] or [Image display (150 dpi)].
When [Print (300 dpi)] is selected, the output resolution is set
to 300 dpi. When [Image display (150 dpi)] is selected, it is set
to 150 dpi.
[Print (300 dpi)]
is selected in this example.
lID

Scanning Film
8Select the [Output Size].
You can select from the following options.
• If you selected [Print (300 dpO] in Step 7:
Flexible / 4 II x6 II / A4 /Letter /Add/Delete
• If you selected [Image display (150 dpi)] in Step 7:
Flexible / 640 x 480 / 800 x600 / 1024 x768 /1600 x1200 /
2048 x1536 /Add/Delete
[Flexible] is selected in this example.
The Flexible
option scans at an enlarged size equivalent to the
4
11
x 6
11
size.
Selecting
an option other than [Flexible] in the [Image Display
(150 dpi)] category allows you
to select the output size in
pixels.
You can scan film at the correct dimensions for computer
displays (screen area) and digital cameras.
9Click [Scan].
The final scan will start.
When the scan
is complete, click the ScanGear CS close box
(Windows)
or (Macintosh).
The scanned image will appear in ArcSoft PhotoStudio.
Output Size
Flexible
640 x 480 pixels
800 x 600 pixels
1024 x 768 pixels
1600 x 1200 pixels
2048 x 1536 pixels
Add/Delete ...
1OSave the scanned image.
Click the [File] menu and select [Save As]. Select the folder where you wish to store the image file, enter
afile name, select afile type
(JPEG format is recommended) and click [Save].
11 Click close box (Windows) or (Macintosh)
in the PhotoStudio window to close it.

Specifications
Specifications
CanaScan 8400F
Scanner Type Flatbed
Scanning Element CCD 6-line color
Light Source Cold cathode fluorescent lamp
Optical Resolution
3200 x 6400 dpi
Selectable Resolution 25 -19200 dpi
Color 16
bit input /16 bit or 8 bit output for each color (RGB)
Scanning Bit Depth Grayscale 16
bit input /16 bit or 8 bit output *1
Scanning Speed*2 Color 10.8 msec./line (1600 dpi), 10.8 msec./line (3200 dpi)
(Photo or Document) Grayscale, B&W 10.8 msec./line (1600 dpi), 10.8 msec./line (3200 dpi)
Scanning Speed*2 (Film)
Color, GrayScale, B&W
10.8 - S4 msec./line (1600 dpi)
Preview Speed*3 Approximately
2.1 sec.
Interface
USB 2.0 Hi-Speed *4,
USB (USB 1.1 equivalent)
Maximum Document Size A4/Letter:
216 x297 mm (8.5 x11.7 in.)
35 mm strip (negative/positive):
12 frames,
Film Type/Number of Frames slides (negative/positive): 4frames
120
format film: max. 6 x 22 cm (filmstrip only)
Scanner Buttons 4buttons: COPY, SCAN, PDF, E-MAIL
Temperature 10°C
to 35°C (50°F to 95°F)
Operating Range
Humidity
10% to 90% RH, 20% to 80% RH when scanning film (without
condensation formation)
Power Requirements
AC adapter (1 00/120/230/240V) *5
In operation: 20 watts maximum, Stand-by: 4.5 watts (100/120 V) I
Power Consumption 5.0 watts (230/240 V)
Power Switch Off: 0.5 watts (Using supplied AC adapter)
Maximum Exterior Dimensions 278 x500 x122 mm (10.9 x19.7 x4.8 in.)
Weight
Approximately 4.4 kg
(9.7Ibs.)
*1 16 bit output supported for film scanning only.
*2 USB 2.0 Hi-Speed mode on Windows Pc. Transfer time to computer is not included.
*3 Calibration processing time is not included.
*4 Note that Macintosh computers with USB 2.0 Hi-Speed interface expansion cards are not supported.
*5 AC adapter type varies according to the region in which the scanner is purchased.
•Specifications are subject
to change without notice.
Upgrading to USB 2.0 (Windows Only)
To upgrade a computer to the USB 2.0 standard, please use one the following USB expansion cards/hubs
that have been verified by Canon for compatibility.
Expansion Cards
• Adaptec USB2connect 5100: PC Ibus
•
Adaptec USB2connect 31 OOLP: PCI bus
•
Adaptec USB2connect 2000LP: PCI bus
•
Adaptec DuoConnect: PCI bus
Hubs
• Adaptec XHUB4
•
Adaptec XHUB4PLUS
•
Adaptec XHUB7PLUS
For installation procedures, please read
the instructions that accompany the USB expansion card/hub.

System Information
This form should be used to record the operating environment for the purchased scanner.
If any problems occur
with the scanner, you will need this information when you contact our Customer
Support Help Desk.
Be sure to record the information and store it in asafe location.
•This information
is also required to request arepair under warranty. Make sure you record the information
and store it
in asafe location.
•Guaranteed servicing
for this equipment will expire five years after production ceases.
Date of Purchase:
Dealer Tel:
Dealer Address:
Scanner
Model: CanoScan 8400F
Serial
Number (on the back of the equipment):
Model:
Clock Speed: MHz
MB
MB Space Available:
MB
Hard Disk Capacity:
CPU:
Memory Capacity (RAM):
• About the Computer Used
Manufacturer:
OS: Windows 0XP 0 Me 0 2000
098
Macintosh ODS X v1 0.1 ODS X v1 0.2
ODS Xv10.3
Monitor Type: Monitor Size: inches
Printer:
Manufacturer:
Type of Printer: Printer Resolutions:
Installed Virus Protection Program:
Installed Compression Program:
On-Board Expansion Cards:
Attached Peripherals:
Connected
Network System:

CANON INC.
30-2, Shlmomaruko 3-chome, Ohta-ku Tokyo 146-8501, Japan
CANON U.S.A., INC
One Canon Plaza, Lake Success, New York 11042, USA
Customer Care Center: 1-757-413-2848
http://www.usacanon.com/consumer
CANON CANADA INC.
6390 Dixie Road, Mississauga, Ontario L5T 1 P7, Canada 1-800-0K CANON
http://www.canonca
CANON LATIN AMERICA, INC
703 Waterford Way, Suite 400 Miami, Florida 33126, USA
CANON MEXICANA, S. de R.L. de C.V.
Anillo Periferico Sur No. 4124, Torre Zafiro (II) Colonia Ex-Rancho de Anzaldo,
PISO 5 Y 6, Mexico D.F.
Tel. [phone]
CANON PANAMA, S.A.
Apartado 7022, Panama 5, Rep. de Panama
Tel. (507)
279-8900
CANON CHILE, S.A.
Ave. Manquehue Norte #1337, PISO 3, Casilla 187-9 Santiago, Chile
Tel [phone]
CANON ARGENTINA, S.A.
Ave. Corrientes 420 (1043) Buenos Aires, Argentina
Tel. [phone]
CANON EUROPA N.V.
P.O. Box 2262 1180 EG Amstelveen, The Netherlands
CANON (UK) LTD.
Wood hatch, Reigate, Surrey RH2 8BF, United Kingdom
For technical support. please contact Canon Help Desk.
PO. Box 431, Wallington, Surrey SM6 OXU, UK
Tel: [phone] (Calls may be recorded)
Fax: [phone]
For sales enquiries, please call 08705 143723
CANON COMMUNICATION &IMAGE FRANCE S.A.
102 Avenue du General de Gaulle
92257
LA GARENNE COLOMBES CEDEX, France
Tel:
014130.15.15 Fax: [phone]
[email protected]
http://www.canon.fr
CANON DEUTSCHLAND GmbH
Europark Flchtenhain A 10,47807 Krefeld, Germany
Technischer Support
Telefax: 0810/5006022 (0.12€1Mln.)
http://wwwcanon.de
CANON ITALIA S.P.A
Via Milano 8, 1-20097 San Donato Milanese (MI) Italy
Tel: [phone]
Fax: [phone]
Pronto Canon: 02/8249.2000
http://www.canon.lt
CANON NEDERLAND N.V.
Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands
Tel: 023-5
670 123 Fax: [phone]
Helpdesk: 023-5 681 681
http://www.canon.nl
CANON BELGIUM N.V./S.A.
Bessenveldstraat 7, B-1831 Diegem, Belglum
Tel: [phone] Fax: [phone]
Helpdesk: 090010627
http://www.canon.be
CANON LUXEMBOURG S.A.
Rue des Joncs 21, L-1818 Howald, Luxembourg
Tel.: (352) 48
47961 Fax [phone]
Helpdesk: 900 74100
http://www.canon.lu
CANON Ges.m.b.H.
Zetschegasse 11, 1230 Wlen, Austria
Tel: [phone] Fax: [phone]
http://www.canon.at
CANON CEE GMBH
Oberlaaerstr. 233, A-11 00 Wlen, Austria
Tel:
[phone] Fax: [phone]
CANON (SCHWEIZ) AG
Product Support CCllndustriestrasse 12, 8305 Dietlikon, Switzerland
Fax [phone]
Hotline: [phone] (Fr2 .13/mln)
http://www.canon.ch
CANON ESPANA S.A.
C/Joaquin Costa, 41-28002, Madrid, Spain
Tel:[phone] Fax.:[phone]
Tel: AtenCion al c1iente: 901.301.301
Help Desk: 906.301255
E-mail:[email protected]
CANON DAN MARK A/S
1. Kund Hojgaards Vej1, DK-2860 Soborg, Denmark
Hotline: [phone]
Forhandlerhenvisning:
http://www.canon.dk
CANON NORGE as
Hallagerbakken 110, Postboks 33, Holmlia, 1210 Oslo, Norway
Tlf: 2262 9321
Faks: 2262 0615
http://www.canon.no
CANON SVENSKA AB
Gustav 111:s Boulevard 26, S-169 88 So Ina, Sweden
Support·Under garantitiden: Tel. [phone]
Support-Efter garantitiden: Tel. [phone]
E-post support: [email protected]
http://wwwcanon.se
CANON OY
Huopalahdentie 24, PO Box 1, FIN-00351 Helsinki, Finland
Puhelin
01054420 Fax: [phone]
Helpdesk: 020 366 466 (pvm)
Internet:
www.canon.fl
CANON NORTH-EAST OY
Huopalahdentie 24, P.O Box 46, FIN-00351 Helsinki, Finland
Tel.
[phone] Fax [phone]
http://www.canon.ru
http://www.canon.ee
http://www.canon.lv
http://www.canon.lt
COPICANOLA SA
Rua Alfredo da Silva, 14, 2721-862 Alfragide, Portugal
Tel:[phone] Fax [phone]
www.coplcanola.pt
info@copicanolapt
CANON SINGAPORE PTE. LTD.
1HarbourFront Avenue #04-01
Keppel
Bay Tower Singapore 098632
Hotline: [phone]
Tel: [phone] Fax: [phone]
http://www.canon.com.sg
CANON MARKETING (MALAYSIA) SDN. BHD.
Block D, Peremba Square
SauJana Resort, Section, 40150 Shah Alam, Selangor Darul Ehsan
Malaysia
Tel: [phone],
Fax [phone]
Helpdesk: 603-7844-6008/9
Enquiry print&[email protected]
http://www.canon.com.my
CANON MARKETING (THAILAND) CO. LTD.
179/34-45 Bangkok City Tower, 9th-10th Floor
South Sathorn
Road, Thungmahamek
Sathorn, Bangkok 10120, Thailand
Tel: [phone], Fax: [phone]
http://www.canon.co.th
CANON MARKETING (PHILIPPINES) INC
Marvin Plaza Building, 2153 Don Chino Roces Ave,
Makati City,
Metro Manila, Philippines
Tel: [phone],
Fax: [phone]
CANON INDIA PVT. LTD.
Neela Gagan, Mandl Road, Mehrauli, New Delhi-11 0030
Tel: [phone]/74,
91-11-26807317/18/19
Fax: [phone]
http://www.canon.co.ln
CANON HONGKONG CO., LTD.
9/F, The Hong Kong Club Building 3A, Chater Road, Central, Hong Kong
TEL: [phone] FAX [phone]
CANON AUSTRALIA PTY. LTD.
1Thomas Holt Drive, North Ryde, Sydney N.S.W 2113, Australia
Info-Line: (02) 9805
2864
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote Auckland, New Zealand
Info-Line
[phone]
1-IE-100A
©CANON INC. 2004
PRINTED IN CHINA