Canon L24 User manual

P/N:88M003A
WarningsItems
L24 - x1
L36 - x3
x 1
x 1(LHS)
x 1(RHS)
x 1
x 6
x 1
x 1
3mm
x 2
x 1
x 1
x 5
x 1
x 1 80%
35%
+95°F (+35°C)
+50°F (+10°C)
Beware of finger trap when opening
or closing the scanner.
Beware of exposed electrical connectors
if covers removed.
Keep out of direct sunlight.
Do not shock.
Keep dry.
Operating Environment:
Relative humidity 35% - 80%
Temperature 10°C – 35°C

P/N:88M003A
Declaration of
Conformity
Energy Star
CB
CE
FCC
UL
VCCI
C-Tick
CCC
GS
BIS
KCC
EAC
BSMI
NOM-019-SCFI
ICES-003
COLORTRAC IMAGING SYSTEM (SUZHOU) CO LTD
#39 DONGJING INDUSTRIAL ZONE, #9 DONGFU RD,
SUZHOU INDUSTRIAL PARK, SUZHOU,
JIANGSU, 215123 CHINA
Model name: L24, L36
Function: Large Format Scanner
Rating voltage: 19V
Rating current: 3.42A
Power supply: FSP065-REBXX
(X=0-9,A-Z or Blank)
Названиемодели:  L24,L36,
Функция:     Широкоформатнаясканер
Рейтингнапряжение: 19V
Рейтингток:    3.42A
Мощностьблок:   FSP065REBXX
(Х=09,AZилипустой)
Warning:
This is a Class A product.
In a domestic environment this
product may cause radio
interference in which case the
user may be required to take
adequate measures.

P/N:88M003A
1
Left side: Remove panels from
the printer as shown.
Fit the left scanner mount using 3
of the screws supplied, and then
replace lower cover only.
2
Right side: Remove panels from
the printer as shown.
Fit the right scanner mount using
3 of the screws supplied, and then
replace lower cover only.
3
Place scanner on scanner
mounts.
4
Place the scanner’s feet in the
holes on top of the scanner
mounts and pull the scanner to
the front.
Secure in place using the 2
thumb screws provided.
5Only one L series MFP system
per network subnet.
192.168.001.XXX
255.255.255.000
192.168.002.XXX
255.255.255.000
Installation

P/N:88M003A
Only one L series MFP system
per network subnet.
(See Troubleshooting 3)
8
xxx.xxx.xxx
xxx.xxx.xxx
9
10
11
Only one L Scan App per
network subnet.
(See Troubleshooting 3)
Power on.
Configure scanner network
address.
Insert CD into PC.
Browse CD.
Select Auto-run.
Install “L Scan App”.
Select Maintenance videos.
Select documentation folder.
7
6

P/N:88M003A
1
2
3
1
2
3
4 4
COPY SCAN to USB SCAN to PC
Insert document into the centre of
the scanner, face up.
Select COPY function and press the
Green button.
Collect your copy from the printer.
Insert document into the centre of
the scanner, face up.
Insert USB memory stick
(FAT32, 128GB max).
Select SCAN to USB function and
press the Green button.
Wait before removing USB stick.
Ensure “L Scan App” is running on
one PC only.
Insert document into the centre of
the scanner, face up.
Select SCAN to PC function and
press the Green button.
Wait for transfer to PC.
1
2
3

P/N:88M003A
CalibrationCleaning
180s
XXX
1
2
3
4
5
Open the scanner.
Spray 99% isopropyl
alcohol onto a lint free
cloth.
Clean
-Top drive rollers
-Scan glass
-Hold up plate
-Bottom rollers
Rotate rollers by hand
to clean all round.
Remove the document
return guides.
Insert the calibration target
into the scanner Face up,
black end first.
Select the Settings.
Select Calibration.
The calibration target will
be scanned back & forth
until complete. Please
wait.
1
3
2

P/N:88M003A
Firmware
240s
LFW FAT32,≤128G
Extract the firmware
zipped files to the root of
a USB memory stick.
Place the USB stick into
the scanner.
Select Settings.
Select Firmware Update.
Please wait until the
firmware has loaded into the
scanner and the scanner
has rebooted.
Troubleshooting
Scan to PC: Scanner stops mid scan. After small wait,
document is ejected and the scan received on the PC
is truncated.
Network or PC is too slow to keep up with data transfer
rate from scanner. Check network & PC or select a
lower scan Quality mode.
1
2Variations in background.
Clean and calibrate the
scanner.
1
5
3
4
2
The scanner communicates with the printer or L Scan
App on the PC via network broadcast. If more than one
of the supported printers (iPF 670/671/770/771) is on
the subnet, there is no way of defining which printer will
receive the copy. Other printer models are not affected.
Similarly, if more than one copy of the L Scan App
software is running on the subnet, there is no way of
defining which PC will receive the scan file. For further
information regarding network configurations, please
contact your local network administrator.
3