CARACOLE Bedtime Beauty CLA-016-103H User manual

CARACOLE ADDITIONS
1
3
Part No. QTY
1
1
2
3
CLA-016-103-H
CLA-016-103-F
CLA-016-103-R
CLA-016-103-F-3067
CLA-016-103-F-30305
CLA-016-103-R-3001
1
CLA-016-103-F-3001
QUEEN BED
CLA-016-103H/F/R
QUEEN BED
CAL KING / KING BED
RTA Hardware(7)
Side rail (3)
Footboard (2)
Headboard (1)
Part Description
Slat (4)
RTA Hardware(6)
Support leg(5)
1 of 2
*** NOTE KEEP THIS SHEET!!! ***
In the unlikely event that you would need a replacement part for your table,
please contact your local authorized Schnadig International dealer. If you
need replacement hardware quickly, it could be purchased from your local
hardware store.
1) Connect the side rial and headboard/footboard by bolt (F).
2) Assemble the side rail and headboard/footboard using the curved washer (A),
flat washer (B), lock washer (C), and nut (D) tighten with wrench provided (E), as shown in Diagram A.
3) Assemble the support leg on the slat, as shown in Diagram B.
4) Mount the assembled support slats (done in step 3) onto the cleat of side rails with screws (G).
Use a Phillips Head Screwdriver to tighten screws, as shown in Diagram C.
UNPACK ALL PARTS AND CHECK AGAINST PARTS LIST ON THIS INSTRUCTION SHEET BEFORE DISCARDING PACKING AND CARTON!!
ASSEMBLY INSTRUCTIONS
TWO(2)PEOPLE AND PHILIP'S SCREWDRIVER REQUIRED
1
8
8
8
Wrench
Nut
Bolt
Lock Washer
8
Flat Washer
8 Curved Washer
NO. Hardware List
A
B
C
D
E
Q'ty
RTA Hardware
F
Q'ty(Queen bed)
G
RTA Hardware
Hardware List
Screw(4.2x32) 16
1
4
Part No. QTY
1
1
2
8
CLA-016-123-H
CLA-016-123-F
CLA-016-103-R
CLA-016-123-F-3067
CLA-016-123-F-30305
CLA-016-103-R-3001
1
CLA-016-123-F-3001
KING BED
CLA-016-123H/F -103R
1
4
Part No. QTY
1
1
2
8
CLA-016-123-H
CLA-016-123-F
CLA-016-143-R
CLA-016-123-F-3067
CLA-016-123-F-30305
CLA-016-103-R-3001
1
CLA-016-123-F-3001
CAL KING BED
CLA-016-123H/F -143R
Q'ty(Cal/King bed)
NO.
12

Slat
Side Rail
DiagramB
Diagram C
Support leg
Adjustable Glide
Slat
F
BCD
E
A
2of 2
DiagramA
Side Rail
Headboard