1 of 2
Created on:2013-03-14
Part No.
1
2
1
1
RTA Hardware (7)
Side rail (3)
Footboard (2)
Headboard (1)
QUEEN BED
con-quebed-HB/FB/SR
QTYPart No.
Part Description
Slat (4) 34
QTY
1
1
2
1
KING BED
con-kinbed-HB/FB/SR
In the unlikely event that you would need a replacement part for your table,
please fax this sheet to our CSR at 1-800-848-8930 with your order or call
1-800-468-8730. If you need replacement hardware quickly, it could
be purchased from your local hardware store.
*** NOTE KEEP THIS SHEET!!!***
1) Connect the side rail and headboard / footboard by bolt (F).
2) Assemble the side rail and headboard / footboard using the curved washer (A),
flat washer (B), lock washer (C), and nut (D) tighten by wrench (E), as shown in Diagram A.
3) Assemble the support leg on the slat, as shown in Diagram B.
4) Mount the assembled support slats (done in step 3) onto the cleat of side rails with screws (H)
. Use a Phillips Head Screwdriver to tighten screws, as shown in Diagram C .
UNPACK ALL PARTS AND CHECK THEM AGAINST PARTS LIST ON THIS INSTRUCTION SHEET BEFORE DISCARDING PACKING AND CARTON!!
ASSEMBLY INSTRUCTIONS
TWO PEOPLE AND PHILIP'S SCREW DRIVER REQUIRED
CARACOLE CONTEMPORARY
con-kinbed-quebed-calbed-008HB/FB/SR
1
2
1
1
QTY
4
Part No.
CAL KING BED
con-calbed-HB/FB/SR
con-quebed-008HB
con-quebed-008FB
con-quebed-008SR
con-quebed-008FB-3067
con-quebed-008SR-3001
con-kinbed-008FB
con-kinbed-008HB
con-quebed-008SR
con-kinbed-FB-3067
con-kinbed-008SR-3001
con-kinbed-008HB
con-kinbed-008FB
con-calbed-008SR
con-kinbed-008FB-3067
con-calbed-008SR-3001
16
Screw(4.2x32)
Hardware List
RTA Hardware(6)
H
Q'ty(Queen bed)
RTA Hardware(7) for Queen/KingBed
Hardware List
Curved Washer(5/16"Dia)
Flat Washer(5/16"Dia)
1
con-quebed-008FB-3001con-qenbed-008FB-3001 1
1
con-quebed-008FB-3001
RTA Hardware (6)
Support leg (5) con-quebed-008FB-30305 3con-kinbed-008FB-30305 8con-kinbed-008FB-30305 8
