CardioQuip VivaCart VC-1000 User manual

CardioQuip®
VivaCart
VC-1000 | Instructions for Use
™
LBL-81 V0

Notices
The information in this document may change without notice. CardioQuip makes no warranty of any kind regarding this
material including, but not limited to, the implied warranty of merchantability and fitness for a particular purpose.
CardioQuip cannot be held liable for errors herein or for consequential damages concerning the use of this material.
CardioQuip reserves the right to make equipment changes and improvements which may not be reflected in this
manual.
Online support resources, including the latest version of this manual, may be accessed at
cardioquip.com/resources.
This document may not be reproduced in whole or in part, as it contains proprietary information. Such information may
not be disclosed to others for any purpose or used for manufacturing purposes without written permission from
CardioQuip. Reproduction or storage of this material in electronic media without the express written permission of
CardioQuip is prohibited.
Manufacturer’s Responsibility
CardioQuip may consider itself responsible for any effect on the safety, reliability and performance of the equipment if
and only if:
•Repairs, adjustments, modifications or retrofit are performed by authorized CardioQuip service personnel
•The device is used according to the instructions set forth in this manual
•The electrical service and connections comply with relevant electrical codes
For assistance, call 888-267-6700 (in the U.S.) or [phone] (international).
VivaCart Service
Contact CardioQuip with questions on parts, servicing or returning merchandise. Please make sure the unit’s
model and serial number are available prior to contacting service personnel.
CardioQuip Service
8422 Calibration Ct.
College Station, TX 77845, USA
US: 888-267-6700
Fax: [phone]
International: [phone]
Email: [email protected]
Web: www.cardioquip.com/service
LBL-81 V0
1
©2023 CardioQuip, LLC
Document Change Tracking
Version
Change
By
Approval
V0
Original Version
WDO
DEP

Table of Contents
Notices 1
Manufacturer’s Responsibility 1
VivaCart Service 1
VivaCart General Information..........................3
Indications for Use 3
Manual Conventions 3
Warnings and Precautions 3
Limited Warranty 4
Device Labeling 5
Specifications 6
Approved Max Load 6
VivaCart Overview 7
VivaCart Setup....................................................8
VivaCart Components 8
Assembly Components 8
Cart Accessories 9
Unpacking 10
VivaCart Assembly 10
1. Weight Plate Assembly 10
2. Swivel Caster Assembly 11
3. Handle Assembly (Type A) 13
4. Storage Basket Assembly (Type B) 13
5. Corner Mount Assembly (Type C) 14
6. Infusion Pole Assembly (Type C) 14
7. Side Accessory Assembly (Type D) 15
8. Removable Upper Shelf Assembly (Type E) 15
9. Pump Guard Mounting Bracket Installations 16
VivaCart Operation..........................................17
Directional Lock Swivel Caster 17
Locking Lower Shelf 18
VivaCart Maintenance.....................................19
Cleaning and Disinfection 19
VivaCart Replacement Components 19
VivaCart Replacement Accessories 20
VivaCart Disposal 21
LBL-81 V0
2
©2023 CardioQuip, LLC

VivaCart General Information
Indications for Use
VivaCart is indicated to store and transport cardiopulmonary equipment used during cardiopulmonary
support cases.
Manual Conventions
This Operator’s Manual uses the international alert symbol to indicate critical safety and operational
information. The alert symbol followed by a WARNING denotes an instruction or procedure which, if not
carried out correctly, may result in injury to the technician, the patient or other personnel. The alert symbol
followed by a CAUTION denotes an instruction or procedure which, if not carried out correctly, may damage
the VivaCart or connected equipment.
Warnings and Precautions
LBL-81 V0
3
©2023 CardioQuip, LLC
WARNING! TIPPING HAZARD. Tipping can occur on inclined surfaces. To prevent tipping,
always keep the cart on a level surface, do not exceed the weight capacity, and distribute the
weight evenly. Never push or pull the cart with excessive force or from an angle. Injury could
occur if the cart tips over.
WARNING! INSPECT PATIENT LINES PRIOR TO TRANSPORT. Do not transport VivaCart unless
all extracorporeal lines and equipment are securely attached and in proper working order.
Disconnected lines can lead to patient injury. Always check and confirm that all equipment is
properly secured and connected before transporting a patient.
WARNING! FALLING HAZARD. Properly secure and mount all devices and equipment to the
VivaCart. Improper mounting or attachment may result in equipment or accessories falling offthe
cart, causing injury or damage.
WARNING! To ensure patient safety, avoid making significant adjustments to weight-bearing
accessories when device is next to patient as it may pose a risk of harm. However, minor
maintenance tasks are permissible.
CAUTION: In the event of visible damage to the power strip, it is essential to connect the
equipment directly to wall outlets to ensure grounding integrity until a replacement power strip is
obtained from the manufacturer.
WARNING! $Please refrain from any alterations or modifications to ensure your safety and the
proper functioning of VivaCart and its accessories. This can compromise the device's
performance and safety standards.

Limited Warranty
CardioQuip, LLC (“CardioQuip”) provides the following limited warranty (“Limited Warranty”) to the purchaser (“Customer)
of the CardioQuip VivaCart (the “Equipment”).
A. This Limited Warranty provides the following assurances to Customer regarding the Equipment:
(1) Should the Equipment fail to function within normal tolerances due to a material defect in parts or labor within a
period of one (1) year, commencing with the delivery of the Equipment to Customer, CardioQuip will at its sole
reasonable discretion:
(a) repair or replace any defective part or parts of the Equipment;
(b) issue a credit to the purchaser equal to the Purchase Price, as defined in Subsection A.(2) below,
against the purchase of the replacement Equipment; or
(c) provide a functionally reasonably comparable replacement Equipment at no charge.
(2) As used herein, “Purchase Price” shall mean the lesser of the net invoiced price of the original, or current
functionally comparable, or replacement Equipment.
B. To qualify for the repair, replacement or credit as set forth in Section A of this Limited Warranty, the following
conditions must be met:
(1) The Equipment must be returned to CardioQuip within thirty (30) days after Customer’s discovery of the material
defect. CardioQuip may, at its sole reasonable discretion, elect to repair the Equipment on site.
(2) The Equipment must not have been repaired or altered outside of CardioQuip's factory in any way which, in the
sole reasonable judgment of CardioQuip, affects its stability and reliability. The Equipment must not have been
subjected to misuse, abuse or accident by Customer.
(3) The Equipment must not have been shipped by commercial carrier beyond the point of CardioQuip’s initial
shipment.
C. This Limited Warranty is limited to its express terms. In particular:
(1) Except as expressly provided by this Limited Warranty, CARDIOQUIP IS NOT RESPONSIBLE FOR ANY DIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED ON ANY DEFECT, FAILURE OR MALFUNCTION OF THE
EQUIPMENT, WHETHER THE CLAIM IS BASED ON WARRANTY, CONTRACT, TORT, OR OTHERWISE.
(2) THIS LIMITED WARRANTY IS MADE ONLY TO THE CUSTOMER. AS TO ALL OTHERS, CARDIOQUIP MAKES NO
WARRANTY, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE WHETHER ARISING FROM STATUTE, COMMON LAW,
CUSTOM OR OTHERWISE. NO EXPRESS OR IMPLIED WARRANTY TO CUSTOMER SHALL EXTEND BEYOND THE PERIOD
SPECIFIED IN A.(1) ABOVE. THIS LIMITED WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO CUSTOMER OR
ANY THIRD PARTY.
(3) The exclusions and limitations set out above are not intended to and should not be construed so as to
contravene mandatory provisions of applicable law. If any part or term of this Limited Warranty is held to be illegal,
unenforceable or in conflict with applicable law by a court of competent jurisdiction, the validity of the remaining
portions of the Limited Warranty shall not be affected, and all rights and obligations shall be construed and enforced
as if this Limited Warranty did not contain the particular part or term held to be invalid. This Limited Warranty gives
Customer specific legal rights. Customer may also have other rights under applicable law which may vary from state
to state.
(4) CardioQuip employees have no authority to bind CardioQuip to any representation, condition or warranty except
this Limited Warranty.
LBL-81 V0
4
©2023 CardioQuip, LLC

Device Labeling
Manufacturer Information
Date of Manufacture
Serial Number
Product should not be discarded as unsorted waste but must be sent to separate
collection facilities for recovery and recycling.
Consultation of Instructions for Use is critical to safe operation
NRTL Certification: IEC 60601-1 Medical Electrical Equipment
To indicate acceptable maximum and minimum temperature limits for transport
and storage.
To indicate the acceptable upper and lower limits$of$relative$humidity$for transport
and storage.
To indicate the acceptable upper and lower limits of$atmospheric pressure$for
transport and storage.
LBL-81 V0
5
©2023 CardioQuip, LLC

Specifications
Approved Max Load
LBL-81 V0
6
©2023 CardioQuip, LLC
Material
Stainless Steel
Dimensions (LxWxH) including poles
81.3 x 58.4 x 198.1 cm (32 x 23 x 78 in)
Weight*
46.2 kg (102 lbs)
*weight!will vary depending on configuration of
accessories
Description
Part
Number(s)
Approved Max Load
Storage Basket
VC-B-VSB
13.6 kg (30 lbs) placed inside of the mounted basket
Corner Mounting
Poles
VC-C-M25
VC-C-M46
13.6 kg (30 lbs) attached with a clamp arm out away from
the cart body at the top of the pole.
Infusion Pole w/
hooks
VC-C-INF
6.8 kg (15 lbs) per hook with no more than 18.1 kg (40 lbs)
distributed throughout the entire pole
Single Hose Hook
VC-D-SH1
4.5 kg (10 lbs) hanging from the hose hook
Triple Hose Hook
VC-D-SH3
4.5 kg (10 lbs) per hook for each hose hook
Side Mount Oxygen
Tank Holder (Type E)
VC-D-O2E
9 kg (20 lbs) placed inside
Upper Shelf
—
18.1 kg (40 lbs) resting on the center of the shelf
Soft-Close Drawer
VC-R-RDR
13.6 kg (30 lbs) within the drawer fully open
Lower Locking Shelf
—
36.3 kg (80 lbs) fully open

VivaCart Overview
LBL-81 V0
7
©2023 CardioQuip, LLC
Total Lock Casters
Grounding Wire & Ball
Weight Plate
Directional Lock Caster
Wheel Mount
Middle Side Mounting Zone
(Type D)
Lower Side Mounting Zone
(Type D)
Front Handle Mounts (Type A)
Soft Close Storage Drawer
Corner Mounts (Type C)
Corner Mount Locking Pins
Corner Mount Vibration Screws
Top Shelf Strap Down Slots
Basket Hook Mounts (Type B)
Lower Locking Shelf
Directional Lock Casters
Lower Shelf Lock
Removable Upper Shelf
Rear Handle Mounts (Type A)
FRONT:
REAR:
Total Lock Caster
Upper Side Mounting Zone
(Type D)

VivaCart Setup
VivaCart Components
Assembly Components
LBL-81 V0
8
©2023 CardioQuip, LLC
VC-R-TLC
Total Lock Caster &
Mount
VC-R-DLC
Directional Lock
Caster & Mount
VC-AA-HXS
Hex Screw, 8mm (M8)
VC-AB-LKW
Lock Washers, 8mm
(M8)
VC-AC-WAS
Washers, 8mm (M8)
VC-AF-CMP
Corner Mount Plunger
VC-AH-HXT
Hex Tool (5mm) for
assembly
Type
P/N
Description
Std. QTY
AA
VC-AA-HXS
Hex Screw, 8mm (M8)
36
AB
VC-AB-LKW
Lock Washers 8mm (M8) Diameter
42
AC
VC-AC-WAS
Washers, 8mm (M8) Diameter
42
AD
VC-R-DLC
Directional lock caster and mount
2
AE
VC-R-TLC
Total lock caster and mount
2
AF
VC-AF-CMP
Corner Mount Plunger
2
AH
VC-AH-HXT
Hex Tool (5mm) for Assembly
1

Cart Accessories
LBL-81 V0
9
©2023 CardioQuip, LLC
VC-C-M25
Corner Mounting
Pole, 25 cm
VC-C-M46
Corner Mounting
Pole, 46 cm
VC-D-SH1
Side Mount
Single Hook
VC-D-SH3
Side Mount
Triple Hook
VC-D-O2E
Side Mount Oxygen
Tank Holder (fits
type E cylinders)
VC-D-20A
Side Mount Power
Strip, 20A
VC-R-RTS
Removable Upper
Shelf
Description
P/N
Type
Std. QTY
Optional
Compact Handle, 4 cm
VC-A-H04
A
x
Extended Handle, 16 cm
VC-A-H16
A
1
Weight Plate, 11 lbs
VC-A-WP
A
x
Storage Basket
VC-B-VSB
B
x
Infusion pole w/ removable hooks
VC-C-INF
C
1
Corner mounting pole, 25 cm
VC-C-M25
C
1
Corner mounting pole, 46 cm
VC-C-M46
C
x
Side Mount Single Hook
VC-D-SH1
D
1
Side Mount Triple Hook
VC-D-SH3
D
x
Side Mount Oxygen Tank Holder (fits type E cylinders)
VC-D-O2E
D
x
Side Mount Power Strip, 20A
VC-D-20A
D
x
Removable Upper Shelf
VC-E-RTS
E
1
Pump Guard Mounting Brackets (set of 2)
VC-E-PGM
E
x
VC-C-INF
Infusion Pole w/
removable hooks
VC-B-VSB
Storage Basket
VC-A-H16
Extended
Handle, 16 cm
VC-A-H04
Compact Handle
4 cm
VC-E-PGM
Pump Guard
Mounting Brackets
(set of 2)
VC-A-WP
Weight Plate, 11 lbs

Unpacking
Carefully inspect the shipping carton for any damage. If damage has occurred, contact the carrier and
request a damage report prior to opening the carton. Notation of damages with the delivery person will
speed the filing of damage claims.
VivaCart Assembly
To assemble VivaCart, begin by installing the optional weight plate.
1. Weight Plate Assembly
The Optional Weight Plate (VC-A-WP) helps
lowers the center of mass on the VivaCart
reducing tipping hazard. The weight plate
assembly includes four (4) M6 mounting
screws, lock washers, and washers. To install
the weight plate, follow the steps below:
1. Turn the VivaCart on its side with lower
shelf locking mechanism facing up (see fig.
1.1).
2. Insert the weight plate in the bay beneath
the cart, directly below the shelf locking
mechanism (see fig. 1.2).
3. To secure the weight plate, align with the
screw holes in the bottom of the cart and
tighten the M6 hex screws with a hex
wrench tool (four screws total). Make sure
each mounting screw has a lock washer,
and washer (see fig. 1.3) before securing
weight plate to base (see fig. 1.4).
LBL-81 V0
10
©2023 CardioQuip, LLC
Fig. 1.1 Placing VivaCart on side with
shelf locking mechanism facing up.
Fig. 1.2 Inserting Weight Plate
Fig. 1.4 Securing weight plate with M6
mounting screws.
Fig. 1.3 Securing M6 mounting screws.

2. Swivel Caster Assembly
Begin assembly by attaching the swivel casters. VivaCart comes standard with four swivel casters: two (2)
Directional Lock Casters, VC-R-DLC, and two (2) Total Lock Casters, VC-R-TLC. For best results and added
control, install one directional lock caster on both the front and rear of the cart (see fig. 2.1). Note:
VivaCart may be equipped with all directional lock casters for an additional cost.
To assemble casters, follow the steps below:
Directional Lock Casters (VC-R-DLC) Assembly
1. Activate the green tab on both VC-R-DLC
Directional Lock Casters and rotate the
caster until the lock engages. Hold up the
caster to the mounting block on the drawer
side and ensure the lock is engaged parallel
to the direction of cart motion. If the wheel
is locked perpendicular to the direction of
motion, try the other wheel.
2. Tilt the cart on its side and hand-tighten the
five Hex screws (AA) with lock washer (AB)
and washer (AC) in that order (see fig. 2.2).
Secure all five screws (two on each side and
one on bottom).
3. Press the caster mounting leg firmly into the
cart body and tighten with a hex wrench
(VC-AH-HXT) from the top down.
4. Repeat until both directional lock casters are
secure.
LBL-81 V0
11
©2023 CardioQuip, LLC
Fig. 2.1 Recommended caster orientation with directional lock casters at
front and rear of cart.
VC-R-DLC
VC-R-TLC
REAR
FRONT
VC-R-DLC
Directional lock caster and
mount
VC-R-TLC
VC-R-DLC
Fig. 2.2 Securing mounting screws.
AA
AB
AC

Total Lock Caster (VC-R-TLC) Assembly
1. With the cart still on its side, place the Total
Lock Caster on the mounting block and
hand-tighten the five Hex screws (AA) with
lock washer (AB) and washer (AC) in that
order (see fig. 2.2). Secure all five screws (two
on each side and one on bottom).
2. Press the caster mounting leg firmly into the
cart body and tighten with the hex wrench
(VC-AH-HXT) from the top down.
3. Repeat until both total lock casters are
secure.
LBL-81 V0
12
©2023 CardioQuip, LLC
Note: If casters are not rolling level once installed, check to ensure all casters are engaging. If
one or more casters is not engaging the ground, loosen bottom M8 screw and four (4) side
screws on the wheel mount and press firmly down on the wheel mount to lower the mounting
position. Next, tighten the four (4) side screws in place before tightening the lower screw.
VC-R-TLC
Total Lock Caster and mount

3. Handle Assembly (Type A)
VivaCart has 2 sizes of handles (that can be
mounted at the front or rear of the cart. Cart
handles are designed with a long side and a
short side, and one or both can be installed
depending on preference. When both handles
are installed, the small notch that is created
can be used to aid in cord/hose management.
To install handles, the long side goes on the
left mount, and the short side is attached to
the right mount (see fig. 3.1). With the handle
in the correct upright orientation, mount the
handle using a hex screw (AA), with lock
washer (AB), and washer (AC) (see fig. 3.2) and
secure the accessory into the hole (hand
tighten). Next, use a hex tool (AG) to tighten
the screw.
4. Storage Basket Assembly (Type B)
The optional VivaCart Storage Basket (VC-B-
VSB) can only be mounted on the side of the
cart with basket hook mounts (see fig 4.1).
To install, place the wire loops near the
opening of the basket (see fig. 4.2) inside the
basket hook mounts (see fig. 4.1) and push
down to lock into place, making sure that the
lower hooks (see fig. 4.3) fit over the middle
side mounting zone.
LBL-81 V0
13
©2023 CardioQuip, LLC
Fig. 3.2. Securing mounting screws.
Fig. 4.1 Basket hook mounts
Fig. 4.3 Storage Basket wire loops
inserted to basket hook mounts
Fig. 4.2 Storage basket
wire loops and lower hooks
Wire Loops
Lower Hooks
CardioQuip
Fig. 3.1. Mounting handle to VivaCart
Long side
Short side
AA
AB
AC

5. Corner Mount Assembly (Type C)
VivaCart features 4 customizable corner
mounts that can be customized with all TYPE C
parts (see “Cart Accessories”, pg. 9).
To secure, insert TYPE C part to desired corner
mount.
Pull locking pin and twist pole until it locks into
place with a “click” (see fig. 5.1).
To lessen noise caused by vibration, tighten the
vibration screw (see fig. 5.2).
For any unused corners of the top shelf, insert
the corner mount plunger (VC-AF-CMP) to aid
cleaning (see fig. 5.3).
6. Infusion Pole Assembly (Type C)
VivaCart’s infusion pole (VC-C-INF) features
four removable hooks for hanging.
To install hooks, begin by unscrewing the pole
cap (see fig. 6.4).
Next, insert hooks facing upward (see fig. 6.5)
into each of the four slots and replace cap.
Hand tighten pole cap to secure hooks.
LBL-81 V0
14
©2023 CardioQuip, LLC
Fig. 6.5 Proper hook orientation.
Fig. 6.4 Removing pole cap
Fig. 5.2 Tightening vibration screw
Fig. 5.1 Releasing locking pin
Fig. 5.3 Corner Mount Plunger

7. Side Accessory Assembly (Type D)
VivaCart features 15 customizable side
mounting zones on either side of the cart that
can be customized with TYPE D parts (see
“Cart Accessories”, pg. 9).
To mount side accessories, choose desired
location, and use a hex screw (AA), with lock
washer (AB), and washer (AC) and secure the
accessory into the hole. hand tighten. Next,
use a hex tool (AG) to tighten the screw (see
fig. 7.1).
For side mount single hook (VC-D-SH1), side
mount triple hook (VC-D-SH3), and side mount
oxygen tank holder (VC-D-O2E), the mounting
hole is slotted for non-centered placement of
mounting screws. The movement along the
mounting zone (see fig. 7.2) allows for greater
flexibility and frees up space.
8. Removable Upper Shelf Assembly (Type E)
VivaCart features a removable top shelf (VC-E-
RTS) that helps accommodate a variety of
centrifugal pumps.
To remove, pull out the shelf until it is released
by the spring lock. When not in use, store the
removable shelf in a dry location.
To re-insert, ensure the shelf is oriented
properly and push into the cut out area until
removable shelf locks into place. Once properly
inserted, the removable shelf should be flush
with the rest of the top shelf.
LBL-81 V0
15
©2023 CardioQuip, LLC
Fig. 7.1 Securing mounting screws.
Side
Mounting
Zones
AA
AB
AC
Removable Upper Shelf
VC-E-RTS
Fig. 7.2 Slotted mounting hole on side
mount accessories

9. Pump Guard Mounting Bracket Installations
Pump Guard Mounting Brackets (VC-E-PGM)
securely mount the Maquet Cardiohelp®to the
top shelf of VivaCart.
To install, remove the Removable Upper Shelf
(VC-E-RTS) from the VivaCart.
Clean and prepare the surface of the cart by
applying Isopropyl Alcohol to a paper towel
and wiping down the VivaCart’s top shelf
(specifically the “u” area around the cut out).
Next, peel the white adhesive cover from the
bottom of the pump guard mounting bracket
and carefully line up the pump guard mounting
brackets as shown (9.1).
Ensure to line up the two mounts evenly on
each side of the cut-out in the top shelf. Press
firmly on mounting bracket for 30 seconds to
adhere to VivaCart.
Note: the thin side of the pump guard
mounting bracket should hang over the cut out
(see fig. 9.2).
To remove: Pull or twist the mounting bracket
with a large amount of force.
Maquet Cardiohelp!is a!trademark!of Maquet Cardiopulmonary GmbH.!
LBL-81 V0
16
©2023 CardioQuip, LLC
VC-E-PGM
Pump Guard Mounting Brackets
(set of 2)
Fig. 9.2 Pump Guard Mounting
Brackets
Thin Side
Overhang
Fig. 9.1 Line up Pump Guard
Mounting Brackets

VivaCart Operation
Directional Lock Swivel Caster
VivaCart features three-way directional lock
swivel casters to aid in ease of transport. With
directional lock engaged, VivaCart will roll truer
and straighter.
Each of the three colored control tabs give the
caster a different function when pressed firmly
(see fig. 9.1):
GREEN (also indicated by arrow) activates
Directional Lock, where the caster locks in
a fixed direction of movement parallel with
the cart.
RED (also indicated by the word “STOP”)
activates the brake that locks the caster in
place and does not allow movement
GRAY (also indicated by the word “OFF”
unlocks the caster to move .
For best results, activate directional lock on the opposite end of where you are pulling or
pushing VivaCart (see fig. 9.2 and 9.3). For instance, if you are pushing from handles mounted on
the front of the cart (enclosed drawer side), activate directional lock on the rear of the cart.
LBL-81 V0
17
©2023 CardioQuip, LLC
Fig. 10.1 Unlocking
the lower shelf.
DIRECTIONAL LOCK
Directional Lock
(Green)
Brake
(Red)
Unlock
(Gray)
DIRECTIONAL LOCK
Fig. 9.2 When pushing VivaCart from the front,
activate directional lock in the rear of the cart.
FRONT
REAR
FRONT
REAR
Fig. 9.3 When pushing VivaCart from the rear,
activate directional lock in the front of the cart.
Fig. 9.1 Using Directional Lock Casters
Fig. 10.2. Locking
the lower shelf.
PUSH
PUSH

Locking Lower Shelf
The lower locking shelf of the VivaCart is
designed to house the CardioQuip
MCH-1000(m) in three different locking
positions.
To adjust the locking lower shelf:
1. Unlock the shelf by turning the dial
counter-clockwise (see fig. 10.1),
2. Lock the shelf by turning the dial clockwise.
Prior to transport, ensure the shelf is
completely retracted and locked by
gently pulling on the handle.
The locking lower shelf is able to be locked in
three positions.
LBL-81 V0
18
©2023 CardioQuip, LLC
WARNING!
Keep the lower shelf completely retracted and locked during transport. Do not attempt to
move VivaCart with the lower shelf in the unlocked position or with the shelf out.

VivaCart Maintenance
Cleaning and Disinfection
After each use, clean all outer surfaces of the VivaCart with EPA-registered tuberculocidal disinfectant
wipes, including accessories, to remove any splattered materials or spilled liquids.
VivaCart Replacement Components
The following is a list of replacement components that can be purchased through a local representative. For
ordering information, visit the CardioQuip website, www.cardioquip.com/sales.
LBL-81 V0
19
©2023 CardioQuip, LLC
Replacement Components
P/N
Description
VC-F-HS8
M8 x 32 Hardware Set with Hex Tool
VC-F-HS6
M6 Hardware Set
VC-R-DLC
Replacement Directional Lock Caster and Mount
VC-R-TLC
Replacement Total Lock Caster and Mount
VC-R-RDR
Replacement Soft Close Storage Drawer w/Slides (Includes Hardware)
VC-R-GWB
Replacement Grounding Wire & Ball
VC-R-LLS
Replacement Lower Locking Shelf W/ Slides (Includes Hardware)
VC-R-LSI
Replacement Lower Shelf Plastic Inserts
VC-R-VSC
Replacement Vibration Screws