CarryBright CBRCTL01 User manual

1 .Package List
CarryBright*®
LED Direction Indicator
Model: CBRCTL01
User Manual
/////////////
® LED Direction Indicator X 4
® Remote Controler x1
® Small Bar Bracket x4
2.Notice Before Use
@ Rear seat tube Bracket x 1
® Rubber Band x 6
© Double charhing USB Cable x 1
® Frictional pad sticker x 12
www.carrybright.com
-It is recommended to use the 5V2A adapter to charge.
-The charging and working hours may be slightly varied by different
usage duration and interval.
-Please make sure the bracket is firmly fixed and undamaged.
-Please replace a new battery if the LED light on the remote control
does not work or flashes less than 2 seconds.
-Please take out the battery before disposing of the product.Dispose
of used batteries in accordance with local regulations.
-Please remove battery protector on the back of the remote before
use if there is one.

3.Proud Overview
Remote Control
Left turn Signal Button
Light Mode Switch
Right Turn Signal Button
LED DirecHon Indicator
Turning Light
Power Button
Red Alarm Light
4.Basic Operation
installation
>
2.Lock the indicators on the bar bracket or
seat tube bracketdepends on your needs.
1 .Stick the silicon frictionol pod to the corresponding
place of mounting bracket.
>

Pair
2b^
s. J
2a.Fix the bar bracket on handle bar/Other tube tightened with rubber band.
2b.Flx the seat tube bracket on seat tube tightened with rubber band.
3.Flx remote control on handlebar tightened with rubber band.
>
1 .Press and hold the power Button(for>3s)on the indicator.
2.LED Direction Indicator will enter the pairing mode and flash slowly.
3.Meanwhile,press the Turn Signal button on the remote to pair the corresponding
turn Signai button with the LED Direction indicator in the pairing mode.
4.0nce the pairing is success.the LED Direction Indicator wiii flash twice and turn off.
S.Repeat Step 1 ~4 for the turn signai of the other direction.
Charge
Please fully charge the LED Direction Indicator before use;
-Connect Indicator to power source with the USB charging cable;
-Charhing time:3 hours
-During Charging:Red iight is ON
-Fuily ChargediGreenlight is ON
Switch Modes
Switch Modes on Remote Control:
Click Mode Switch button(|P) to switch
modes for LED Direction indicator
Mode®: Red light keeps flashing(for night caution);
Mode®: Red iight and yeilow turn light keep flashing(warning);
Mode®; LED Direction Indicator OFF;
*Turn signal can only be activated by remote in Mode(D&(D.
**Please switch to mode ® after use for battery-saving by the
Mode Switch button(Remote) or Power button(LED Direction Indicator).

Switch Modes on LED Direction Indicator:
Click Mode Switch button(^) on LED Direction Indicator to switch
LED Direction Indicator modes.
IstrLED Direction Indicator flash in 2HZ
2nd:LED Direction Indicator OFF
Press and hold the power Button(for>3s)anytime to enter pairing mode
Turning Signal
Press left turn button ( to flash left turn signal for 30s
Press right turn button ( H) fo fash right turn signal for 30s
Press corresponding turn button again to cancel the turn
signal while signal is activatred.
*Turn signal con only be acficafed by remofe in Mode(D&(i),
S.Warranty
Warranty
The LED Direction Indicator comes with 12 months warranty.
Support
If you hove any questions or concerbs about your product,please drop
us on email at www.carrybright.com.Any contact will be answered
within 24 hours.
6.Specification
Turn Signal Light
•Light sourceiCOB LED
•Size:49mmx65mmx26mm
•Waterproof Level:IP65
•Working Hour:4hours continuous flashing,ZOdays stand by.
•Battery:230mAh lithium battery
•Working Temperature:-! 0X~40®C
•BrightnessrZSLumen
Remote Control
•Light SourcerLED
•Size:52mmx50mmxl 8.5mm
•Waterproof Level:IP65
•Working hourrStandby 200days
•Battery:CR2032 button battery
•Working DistanceiWithin 10 meters from the light