Carson MAGNILAMP GN-55 User manual

Installing Batteries
Pull open battery door (Fig. 1). Insert 2AA batteries and replace battery door (Fig. 2). Make sure to
follow polarity indicators marked inside battery compartment. Replace battery door (Fig. 3).
Warning: Do not mix old and new batteries, batteries with different brand names or different types within
brands. Different attributes may cause the battery to leak fluid, overheat or explode. Do not expose to fire or
excessive heat. Inspect all batteries for signs of corrosion or leakage. Use alkaline batteries only,
rechargeable batteries not recommended. Insert all batteries in the direction indicated.
To Activate LED Light
To turn light on, slide switch (located on side of magnifier handle) forward (Fig. 4).
Fig. 1
GN-55
MAGNILAMPTM
2x FLEXIBLE ARM LIGHTED MAGNIFIER
Instructions for Use:
Fig. 2 Fig. 3
Fig. 4

Customer Service:
If you experience any difficulties, please contact us and we will be happy to help you.
In the U.S.A.
Phone: [phone]
Email: [email protected]
In the U.K.
Phone: [phone]
Email: [email protected]
In the E.U.
Phone: [phone]
Email: [email protected]
For warranty information, visit www.carson.com/warranty
GN-55 / © 2020
CAUTION - FIRE HAZARD:
Keep magnifier away from direct sunlight to prevent accidental fire.
To Use Hands-Free
Snap adapter into base. Please note that adapter is "keyed" to fit only one way (Fig. 5). Place magnifier handle
into adapter. It is also keyed and will easily "click-lock" into base when correctly inserted (Fig. 6). Adjust flexible
arm to position lens and light as needed (Fig. 7).
Fig. 5 Fig. 6Fig. 7
To Remove Magnifier From Base
Lift lock tab outward and lift magnifier from base (Fig. 8) to use as hand-held magnifier.
Fig. 8