Case-Mate CM031201 User manual

MOBILE CHARGER

COMPATIBILITY
The Case-Mate Mobile Charger is compatible with the following Apple devices with a Lightning
connector port:
GETTING STARTED
What’s Included
iPhone 6 Plus iPhone 6 iPhone 5/5s/5c iPod touch
5th Generation
charging port
Before You Begin
Make sure your Mobile Charger is fully charged before the first use. Connect the included micro
USB charging cable to the charging port on the bottom of your Mobile Charger, then connect the
USB side of the cable to an available USB port on your computer or USB wall adapter.
Mobile Charger
(actual style may vary)
Charging CableQuick Start Guide
1
iPod nano
7th Generation

How to Recharge the Mobile Charger
Connect the included micro USB cable via the micro USB port on the bottom of the Mobile
Charger. You can recharge the Mobile Charger using a computer USB port or by using your
Apple or third-party USB wall adapter. You can also recharge your Mobile Charger while it
is connected to your device. The Mobile Charger features built-in pass-through technology
and will always charge the device to full capacity before recharging itself.
How to Charge Your Device
Power on the Mobile Charger by sliding up the large on/o switch on the side. The LEDs
on the bottom will turn on to indicate that the Mobile Charger has been powered on.
Plug the Lightning connector into your device to begin charging. Once you are finished
charging your device, simply disconnect the Lightning connector and slide down the on/
o switch to power it o.
2
on/o switch
Checking the Battery Level
You can check the battery level of the Mobile Charger by powering it on and checking the
status of the LEDs on the bottom:
battery indicator LEDs
LED 1 Blinking: 0 - 10%
LED 1 Illuminated: 10 - 25%
LED 2 Illuminated: 25 - 50%
LED 3 Illuminated: 50 - 75%
LED 4 Illuminated: 75 - 100%

CARING FOR YOUR MOBILE CHARGER
• Keep your Mobile Charger dry and away from moisture and liquids.
• To clean the Mobile Charger, simply wipe it with a soft, water-dampened cloth. Wipe the
pins on the Lightning connector gently with a soft, dry cloth.
• Recharge the Mobile Charger once every three months when not in use, and remember to
charge it for one hour before the first use.
3
WARRANTY INFORMATION
The Case-Mate Mobile Charger includes a 1-year warranty from date of purchase. For detailed
warranty information, please visit www.case-mate.com/warranty or contact Case-Mate customer
service at:
[phone]
support.case-mate.com
Monday - Friday, 9am to 6pm (EST)
USA: Federal Communications Commission (FCC) Statement
Name: Case-Mate Mobile Charger and/or Rebecca Minko Mobile Charger
Model: CM031201, CM031527, CM031860, CM031862, CM031864
FCC ID: CST-FV140930253
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
REGULATORY AND SAFETY NOTICES

4
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC Warning: Changes or modifications to this device not expressly approved by Case-Mate, Inc.
could void the user’s authority to operate the equipment.
Case-Mate, Inc.
2048 Weems Rd.
Tucker, GA 30084 U.S.A.
[phone]
Canada: Industry Canada (IC) Statement
Name: Case-Mate Mobile Charger and/or Rebecca Minko Mobile Charger
Model: CM031201, CM031527, CM031860, CM031862, CM031864
IC: CST-IC140930011
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour
l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique
à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que
la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à
l’établissement d’une communication satisfaisante.
Case-Mate, Inc.
2048 Weems Rd.
Tucker, GA 30084 U.S.A.
[phone]

5
R&TTE and LVD Declaration of Conformity
We,
Case-Mate, Inc.
2048 Weems Rd.
Tucker, GA 30084
U.S.A.
[phone]
declare under our sole responsibility that the product:
Name: Case-Mate Mobile Charger and/or Rebecca Minko Mobile Charger
Model: CM031201, CM031527, CM031860, CM031862, CM031864
Year of Manufacture: 2014
to which this declaration relates is in conformity with the essential requirements and other
relevant requirements of the R&TTE Directive (1999/5/EC) and Low Voltage Directive (2006/95/
EC). The product is in conformity with the following standards and/or other normative
documents:
EN 55022:2010
EN 55024:2010
Technical file held by:
Case-Mate, Inc.
2048 Weems Rd.Tucker, GA 30084
U.S.A.
[phone]
Authorized person:
Authorized person:
Name: SAUMIL MODY
Title: DIRECTOR - ENGINEERING & SOURCING

6
Important Safety Instructions
• The Mobile Charger should be operated only in open-air conditions. It should not be operated in an enclosed,
unventilated place such as a carrying bag, pocket, or purse. Failure to follow these instructions may cause
damage to the Mobile Charger by overheating.
• Do not store the Mobile Charger in high temperature environments, such as intense sunlight. Do not place the
Mobile Charger in fire or other excessively hot environments.
• Do not expose the Mobile Charger to moisture or submerge it in liquid. Keep it dry at all times.
• Do not strike the Mobile Charger with any blunt or sharp objects.
• Be cautious of excessive drops, bumps, abrasions or other impacts to the Mobile Charger. If there is any damage
to the battery such as dents, punctures, tears, deformities or corrosion due to any cause, discontinue use and
contact the manufacturer or dispose of it in an appropriate manner at your local battery recycling center.
• Do not disassemble the Mobile Charger or attempt to repair or modify it in any manner.
• Do not attempt to charge the Mobile Charger using any method, apparatus or connection other than the device’s
USB connector.
• Do not attempt to replace any part of the Mobile Charger.
• Do not slide or push on the power button with excessive force to avoid damaging the switch.
• It is normal to for the product to become warm during use.
• If the Mobile Charger is intended by Purchaser to be used by a minor, purchasing adult agrees to provide detailed
instructions and warnings to any minor prior to use. Failure to do so is the sole responsibility of the purchaser,
who agrees to indemnify the Manufacturer for any unintended use/misuse by a minor
• All Case-Mate Mobile Charger products have gone through a thorough quality assurance inspection. If you
find that the Mobile Charger is excessively hot, is emitting an abnormal smell, is deformed, abrased, cut or is
experiencing or demonstrating an abnormal phenomenon, immediately stop usage and contact the Manufacturer.
• For extended charge storage, charge the Mobile Charger for one hour before first use.
• Never dispose of the Mobile Charger in the garbage. Disposal of batteries in the garbage is unlawful under state
and federal environment laws and regulations. Always take used batteries to your local battery-recycling center.
LEGAL
Please consult your device packaging to determine whether this device is compatible with your
particular mobile device. Manufacturer is not responsible for any damages to any mobile device
incurred through the use of this product.
Manufacturer shall not in any way be liable to you or to any third party for any damages you or
any third party may suer as a result of use, intended or unintended, or misuse of this battery
in conjunction with any device or accessory other that the appropriate mobile device for which
this battery is designed. If you are responsible for battery use with an unintended mobile device
and damages result from such use, you agree to indemnify the Manufacturer for any resulting
injuries to any third parties.
© 2014 Case-Mate, Inc. All Rights Reserved. All other trademarks are properties of their
respective owners. Designed in Atlanta, U.S.A. Patent Pending. iPhone and iPod are registered
trademarks of Apple Inc., registered in the U.S. and other countries.