Casio HS-50W User manual

Operation Guide HS-50W
1
MA0312-EA
ILLUSTRATION
Year
Month
Day
Seconds
Seconds
Minutes
TIME DISPLAY STOPWATCH DISPLAY
Minutes
Hour
Hour
Day of
the week
PM
Lap counter
Press .
Split tim
e
Lap time
1/100th
of a second
Total
elapsed tim
e
Pressed down for a few
seconds to change between
12/24-hour formats.
•A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before using
the stopwatch.
•Depending on the stopwatch model, the configuration of your stopwatch may differ somewhat from that shown in
the illustration.
GENERAL GUIDE
Every time the Bbutton is pressed, the display is switched between TIME and STOPWATCH displays.
Abutton ..... Starts and stops timing.
Bbutton ..... Toggles between the current time and stopwatch screens.
Cbutton ..... Registers a lap/split time.
Rbutton ..... Recalls lap/split time records and total elapsed time.
SPLIT TIME AND LAP TIME
Split time (SPLIT) is the time
elapsed from the start to a
specific point.
Lap time (LAP) is the time
elapsed from one point to another
or for one lap around a track.
START
1ST SPLIT
2ND SPLIT
3RD SPLIT
START
1ST LAP
2ND LAP
3RD LAP
USING THE STOPWATCH
A signal confirms Aand Cbutton operations.
Working range
The total elapsed time and split time display is limited to 9 hours 59 minutes 59.99 seconds. Lap time display is
limited to 59 minutes 59.99 seconds.
Thereafter it will be reset and started again. The lap counter starts from 1 to 99 and repeats from 0.
NORMAL TIME
0a(a)
START STOP RESET
CHART
BUTTON
OPERATION
DISPLAY
NET TIME
0ab
(a) (a) (a + b)
START STOP START STOP RESET
CHART
BUTTON
OPERATION
DISPLAY
(Loss time)
After stopping a net time operation by pressing A, you can resume it by pressing Aagain.

Operation Guide HS-50W
2
LAP/SPLIT TIMES
A maximum of 9 lap/split time records and total elapsed time are automatically stored into the memory, and
recalled by pressing the Rbutton.
Once 9 lap/split time records are stored (counter shows a flashing value greater than 9), pressing Cdisplays the
current lap/split time, but does not store it in memory.
0a(a) b(a + b) c(a + b + c) (t)
START
1ST LAP 2ND LAP 3RD LAP
1ST SPLIT (a)
2ND SPLIT (a+b)
3RD SPLIT (a+b+c)
STOP RESET
CHART
BUTTON
OPERATION
DISPLAY
Recording the Finishing Times of Multiple Runners
After pressing Ato start timing, press Cas each runner crosses the finish line. This records each of the finishing
times in memory, which you can recall by pressing the Rbutton.
*
Recorded times are retained in memory until you start a new net time operation (by pressing A ) after clearing
the stopwatch screen to all zeros (by pressing
C ).
Example : To record the times of 10 different runners.
START 1ST RUNNER
FINISHES
2ND RUNNER
FINISHES
9TH RUNNER
FINISHES
10TH RUNNER
FINISHES
CHART
BUTTON
OPERATION
DISPLAY
Difference between this runner’s record
and the previous runner’s record
You can scroll through time records in memory by pressing , even while the stopwatch is
still running.
Press .
Runner’s finishing position
Runner’s record
SETTING TIME AND DATE
1) Press Cfor a few seconds in TIME display to set time and date.
2) Press Aon a time signal to correct seconds.
3) Press Cshift flashing digit (s). Digit(s) to be changed will flash.
SECONDS HOUR MINUTES YEAR
MONTHDAYDAY OF THE WEEK
4) Each press of Aincrements digit. Keep pressed to move quickly.
5) Press Bor Cto complete setting.
*
Year digits can be set up to the year 2029.
AUTO-retrieve function
Display automatically returns to TIME if left unused for a few minutes.