Cassia S1000 User manual

CASSIA S1000 / S1100 Bluetooth Router
QUICK START GUIDE
© Cassia Networks, Inc. Cassia Networks and the Cassia Networks
logo are trademarks of Cassia Networks, Inc.

GETTING STARTED -- ENGLISH
I. INCLUDED IN PACKAGE
(1) Quick Start Guide(1) Mounting Plate
WIFI BT SYS PRW ETH
Cassia S1000/S1100 Bluetooth Router
QUICK START GUIDE
(1) Micro USB Power Cable(1) S1000/S1100 Router
(1) USB Power Plug
(3) Mounting Screws

II. MOUNTING & INSTALLATION
Wall Mount
Ceiling Mount
1) Place the S1000/1100 on a flat, unobstructed surface or mount it using
the supplied mounting kit in a vertical or horizontal orientation
2) If mounting, first screw mounting plate into wall or ceiling
3) Then, connect S1000 to Power with supplied Micro USB cable & power
adapter and to a WiFi Access Point via Ethernet or WiFi (2.4GHz only).
S1100 can also connect to power-over-ethernet (POE) connection.
RESET ETH MICRO USB
SET ETH
RESET MICRO USB
SET
ETH/PoE
ETH/POE
S1000
S1100 (POE)

MOUNTING & INSTALLATION - cont.
4) Place S1000/1100 router at a slight angle against the mounting plate
and twist into place (clockwise)
WIFI BT SYS PRW ETH
WIFI BT SYS PRW ETH
Wall Mount
Ceiling Mount
IMPORTANT: For best range results, we recommend mounting the S1000/
1100 on the ceiling in an unobstructed location.

III. SETUP S1000/1100 BLUETOOTH ROUTER
1) The Cassia IoT Access Controller (AC) is the software used to easily
setup and manage both your S1000/1100 and your Bluetooth low
energy end devices
2) For instructions on accessing and using the AC, please go to the Cassia
Networks website for the latest information:
http://www.cassianetworks.com/enterprise/s1000-start
IV. PRODUCT INTERFACE
Bluetooth (4.0, 4.1)
WiFi (802.11b/g/n, 2.4GHz only)
Ethernet (10/100 Base-T); PoE 48V power (802.3af/at for S1100 only)
Micro USB (2.0; DC 5V, 2.1A power)
USB (2.0; supports 3G/4G dongle)
LEDs (activity indicator) & Reset Button
V. ENVIRONMENTAL
Operating temperature: 0°C to 50°C (32°F to 122°F)
Humidity: 5% to 90% non-condensing
For additional assistance, please email: suppor[email protected]

Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Note: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
For additional information, please go to: http://www.cassianetworks.com

Routeur Bluetooth CASSIA S1000 / S1100
GUIDE DE DÉMARRAGE RAPIDE
© Cassia Networks, Inc. Cassia Networks et le logo
Cassia Networks sont des marques déposées de Cassia Networks, Inc.

DÉMARRER - FRANÇAIS
I. INCLUS DANS L'EMBALLAGE
(1) Guide de démarrage rapide(1) Plaque de fixation
WIFI BT SYS PRW ETH
Cassia S1000/S1100 Bluetooth Router
QUICK START GUIDE
(1) Câble d'alimentation Micro USB(1) Routeur S1000 / S1100
(1) Fiche d'alimentation USB
(3) Vis de fixation

II. MONTAGE ET INSTALLATION
Installation
Murale
Support au Plafond
1) Placer le S1000/1100 sur une surface plane et dégagée ou l'assembler
à l'aide du kit de montage fourni en position horizontale
2) En cas de montage, visser d'abord la première plaque de fixation dans
le mur ou le plafond
3) Ensuite, brancher le S1000 avec le câble micro USB et l'adaptateur
secteur fournis et le relier à un point d'accès WiFi via Ethernet ou WiFi
(2,4 GHz uniquement). Le S1100 peut également se connecter via
la connexion Power-over-Ethernet (POE).
RESET ETH MICRO USB
SET ETH
RESET MICRO USB
SET
ETH/PoE
ETH/POE
S1000
S1100 (POE)

MONTAGE ET INSTALLATION - suite
4) Positionner le routeur S1000/1100 légèrement en biais contre la plaque
de fixation et faire tourner en place (sens des aiguilles d'une montre)
WIFI BT SYS PRW ETH
Installation Murale
Support au Plafond
IMPORTANT: Pour obtenir la meilleure portée possible, nous vous recom-
mandons d'installer le S1000 / 1100 au plafond dans un endroit non obstrué.

III. CONFIGURATION DU ROUTEUR BLUETOOTH X1000
1) Le loT Access Controller (AC) de Cassia est le logiciel utilisé pour
configurer et gérer facilement vos appareils terminaux à faible énergie
S1000 / 1100 et Bluetooth
2) Pour savoir comment obtenir et utiliser le logiciel AC, veuillez consulter
le site Web de Cassia Networks pour obtenir les dernières informations:
http://www.cassianetworks.com/enterprise/s1000-start
IV. INTERFACE PRODUIT
Bluetooth (4.0, 4.1)
WiFi (802.11b/g/n, 2.4GHz uniquement)
Ethernet (10/100 Base-T; PoE 48V - 802.3af/at pour S1100 seulement)
Micro USB (2,0; DC 5V, 2.1A puissance)
USB (2.0; Prend en charge 3G / 4G dongle)
LEDs (indicateur d'activité) & Bouton de Réinitialization
V. ENVIRONNEMENT
Température de fonctionnement: 0°C à 50°C (32°F à 122°F)
Humidité: 5% à 90% sans condensation
Pour obtenir de l'aide supplémentaire, envoyez un courriel à
suppor[email protected]

IC Radiation Exposure Statement for Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Pour obtenir de l'aide supplémentaire, rendez-vous sur:
http://www.cassianetworks.com
Beijing Cassia Networks Technology Co., Ltd.

RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
EU Regulatory Conformance
Cassia Networks Inc., hereby declares that Cassia S1000/S1100 Series
Bluetooth Router are in compliance with directives listed below:
EMC Directive 2014
Low Voltage Directive 2014
R&TTE Directive 1999
REACH Regulation (EC) No.: 1907/2006
RoHS Directive 2011
WEEE Directive 2012
A Declaration of Conformity for these directives is available for viewing at
http://www.cassianetworks.com.
Beijing Cassia Networks Technology Co., Ltd.

RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
EU Regulatory Conformance
Cassia Networks Inc., hereby declares that Cassia S1000/S1100 Series
Bluetooth Router are in compliance with directives listed below:
EMC Directive 2014
Low Voltage Directive 2014
R&TTE Directive 1999
REACH Regulation (EC) No.: 1907/2006
RoHS Directive 2011
WEEE Directive 2012
A Declaration of Conformity for these directives is available for viewing at
http://www.cassianetworks.com.