CASTLECREEK 581816 User manual

Congratulations on your CASTLECREEK® purchase.
We’re proud to help you furnish and enhance the place you call home.
Whether indoors or outside, CASTLECREEK® is the perfect choice for
comfortable living at an exceptional value.
Item #581816 CASTLECREEK® 4FT Window and Door Awning
Fits openings 32" to 48"
For assistance with your product, please contact the Sportsman’s Guide customer
service at 1-800-888-3006 Mon.-Fri. 7:00am to 9:00pm, Sat.-Sun. 8:00am to 8:00pm
CST or go to sportsmansguide.com/customerservice/contactus
sportsmansguide.com
581816 - CASTLECREEK® 4FT Awning
1 of 3

WARNINGS:
•Confirm all parts are present before assembly. If any part is missing, cracked or damaged, please
contact Sportsman’s Guide customer service before assembly.
•At least two people are recommended for safe assembly and installation of this product
•WARNING: This package contains small parts and is a choking hazard, keep away from children,
persons that have a tendency to place inedible objects in their mouths and pets.
•Due to the numerous materials to hang this product from, the enclosed hardware is not intended to be
used for all situations and in all constructions types. We recommend consulting with a qualified
professional for your particular installation and additional hardware needs to insure not only proper
support for the weight of the product, but also avoid utility and property damage.
•NEVER attempt to modify this product or subject it to an installation or use for which it was not
designed. Doing so may result in damage and/or serious injury.
•The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this product. Always be
aware of the environment and ensure that the product is used in a safe and responsible manner.
sportsmansguide.com
581816 - CASTLECREEK® 4FT Awning
2 of 3

Finished plan
Installation of Awning
step2: Assemble the head rod and front bar
by using the internal connectors.
step3:Slide both head rod and front
bar into awning sleeves.
step1:Identify all parts from
the parts list above. Install
the head rod clamps,
spacing evenly starting 6”
from each end of
window.
step4:Add the elbows to
the end of front bar, slide the
arms into the side sleeves
and thread into the elbows
step6:Add the eye ends
on ends of the arms,
straighten the front bar,
making sure the awning is
level and screw the
hinges into wall.
step5:Attach the head
rod into the head rod clamps
and tighten the wing nuts.
Install one pulley on the
left head rod clamp hook,
install two pulleys on each
hook of the right head
rod clamp (Install the
two pulleys on the
side you want the
pull cord)
step8:Tie one
end of the thread onto
the left front bar of awning,
thread through left side pulley,
then over closest right side
pulley and down to the cleat
and back up to open right
pulley, then tie end onto the
right front bar, draw all slack in
thread towards cleat and tie
off. (Substitute left for right to
reverse side you wish to
operate from)
step7：Install the
tie down cleat on the
left hand side 4-6” below
the awning (when facing
the awning)
CARE and USE
•Avoid using chemicals to clean your awning. They may damage UV treatment.
•Use mild soap and water to clean your awning.
SG03.20
sportsmansguide.com
581816 - CASTLECREEK® 4FT Awning
3 of 3