Catalano Zero Monobloc User manual

Refer to seat installation instructions
Zero Monobloc
Installation Instructions

110
180
830
110
830
180
180
For wall-outlet installation, place the pipe fittings as shown
Fasten fixing sets to the floor Place the WC, then fasten it using the supplied smallware
Place the cistern on the WC, after the installation of the lip-shaped seal
Fasten the cistern to the wall
For floor-outlet installation, place the pipe fittings as shown
Connect flex hose to cistern stop tap Place the cistern cover into position
1
2

DUTS
WERCS
EGNIH
TUNGNIW
GNIHSUB
TUN
GNIKCAP
TAESROFREPMUBREBBUR
REVOCTAESROFREPMUBREBBUR
ESOLCTFOSREVOCCW
WC COVE SOFT CLOSE
GRAIN
SCSTP
Hinge components are made with high quality steel, neverthless the inaccuracy of cleaning and
maintenance may cause oxidation spots, hard and/or rusty deposits.
For the cleaning use water and mild soap solution.
Rinse and dry carefully.
Do notuse abrasive, acid or chlorate cleansings (bleach or ammonia).
The seller will replace the products with manufacturing defects within 5 years from delivery date.
IMPORTANT
0412

D
Place the toilet seat and then screw the fastening pins
- Insert the fastneres in the appropriate holes
A
B
- Tighten the fasterners by pulling them upwards
- With the help of the cardboard template, center the fasteners and then tighten them
C