Caterlite CJ107 User manual

Model • Modèle • Modell • Modello • Modelo • Malli:
CJ107
Food processor
Instruction manual
CJ107_EN_A5_v1_20220721.indb 1CJ107_EN_A5_v1_20220721.indb 1 2022/7/21 17:082022/7/21 17:08

2
EN
Safety Instructions
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT use jet/pressure washers to clean the appliance.
• DO NOT immerse the motor base in water.
• DO NOT attempt to process items that this machine is not
designed for. This can damage the cutting attachments.
• DO NOT feed food into the appliance by hand or objects (like
knives). ALWAYS use the pusher supplied.
• Always switch off and disconnect the power supply to the
appliance when not in use, before cleaning and before putting
on or taking off parts.
• Suitable for indoor and household use only.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a
Caterlite agent or a recommended qualified technician in order
to avoid a hazard.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
CJ107_EN_A5_v1_20220721.indb 2CJ107_EN_A5_v1_20220721.indb 2 2022/7/21 17:082022/7/21 17:08

3
EN
• Children should be supervised to ensure that they do not play
with the appliance.
• Keep the appliance and its cord out of reach of children.
• Do not let cord hang over edge of table or counter, or touch
hot surfaces.
• Be extremely careful when handling blades and inserts,
especially when assembling/disassembling and cleaning after
use. Blades are very sharp.
• Do not operate with loose or damaged blades.
• Only use original Caterlite parts and attachments with this
appliance.
• NEVER leave the appliance unattended when in use.
• The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
• Caterlite recommend that this appliance should be periodically
tested (at least annually) by a Competent Person. Testing
should include, but not be limited to: Visual Inspection,
Polarity Test, Insulation Continuity and Functional Testing.
• Caterlite recommend that this product is connected to a circuit
protected by an appropriate RCD (Residual Current Device).
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your Caterlite product.
Pack Contents
The following is included:
• Motor base
• Driver
• Processing bowl
• Blade adapter
• Bowl cover
• Pusher
• Blade holder
• Slicing blade
• Coarse grating blade
• Fine grating blade
• Chopper blade (metal)
• Kneading blade (plastic)
• Emulsifying plate
• Citrus juicer attachment
• Cone
• Blender Jug, lid and lid plug
• Instruction manual
Caterlite prides itself on quality and service, ensuring that at the time of unpacking the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your Caterlite dealer immediately.
CJ107_EN_A5_v1_20220721.indb 3CJ107_EN_A5_v1_20220721.indb 3 2022/7/21 17:082022/7/21 17:08

4
EN
Installation
Remove the appliance from the packaging. Make sure that all protective plastic film and plastic coatings
are thoroughly removed from all surfaces. Place the appliance on a flat surface, ensuring the suction feet
on the bottom get a firm grip.
Knowing the appliance
Pusher
Blender jar
Bowl cover
Blade adaptor
Driver
Speed setting
Switch knob
Motor base
Jar lid
Lid plug
Chopper blade
Kneading blade
Emulsifying
plate
Citrus juicer attachment
Stainer Cone
Blade holder
Fine grating blade
Coarse grating blade
Slicing blade
Processing bowl
CJ107_EN_A5_v1_20220721.indb 4CJ107_EN_A5_v1_20220721.indb 4 2022/7/21 17:082022/7/21 17:08

5
EN
Assembly
• Caterlite accept no responsibility for any injury caused by incorrect assembly/
disassembly.
• Cutting blade is sharp! Handle with care!
• Equipped with a safety switch, the appliance will not start before the parts are securely
mounted.
Before assembly, ensure to:
• Disconnect the appliance from the power supply.
• Clean all cutting discs and parts that come into contact with food with warm soapy water. For details,
refer to section “Cleaning, care & maintenance”.
• Never immerse the motor base in water, nor rinse it under running water.
Mounting Chopper blade Mounting Kneading
blade
Mounting Emulsifying plate
1. Position Driver on motor base.
2. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.
3. Place blade adaptor onto the Driver.
4. Place chopper blade onto the
blade adaptor.
5. Turn the chopper blade to the
right position.
4. Place kneading blade
onto the blade adaptor.
5. Turn the kneading blade
to the right position.
4. Place Emulsifying plate onto
the blade adaptor.
5. Turn the Emulsifying plate to
the right position.
6. Place cover on bowl, turn clockwise until cover interlocks on bowl.
7. Place pusher into feeding chute
Tips:
• Always keep the chopper blade
inside the bowl before feeding
food.
• Use pulse function for several
times to avoid cutting too fine.
Do not run for too long while
cutting hard cheese or chocolate.
Otherwise these materials will
overheat and melt.
• Standard chopping time: 30-60
sec
Food Quantity/weight
per batch
Chocolate ≤100g
Cheese ≤200g
Meat ≤500g
Tea or spice 50~100g
Fruit &
vegetable
100~300g
Onion ≤500g
Tips:
• Always attach kneading
blade into the bowl
before feeding food.
• Standard kneading
time: 30-180 sec
Food Quantity/
weight
per batch
Flour /
Soft Cheese
≤300g
Egg ≤5pieces
Tips:
• Emulsifying plate can be
used to mix cheese and egg,
to make mayonnaise and
pudding rapidly.
• Do not use Emulsifying plate
to knead flour.
Food Quantity/
weight per
batch
Time
Egg 2~5pcs 30~70
sec
Cheese 125~350ml 20sec
CJ107_EN_A5_v1_20220721.indb 5CJ107_EN_A5_v1_20220721.indb 5 2022/7/21 17:082022/7/21 17:08

6
EN
Assembly
Mounting the Slicing blade/
Grating blade
Mounting the Citrus juicer
attachment
Mounting the Blender jar
1. Position Driver on motor
base.
2. Position processing bowl
into the Driver and turn
clockwise to seat firmly on
motor base.
3. Install desired blade onto
the blade holder.
4. Place blade holder onto the
Driver.
5. Place cover on bowl.
6. Turn cover clockwise until
cover interlocks on bowl.
7. Put food into the feeding
chute.
8. Use pusher to push food
down for processing.
Tips:
• Choose desired blade
according to food type and
your desired food shape to
achieve.
• Push softly when feeding
food.
• Pre-cutting food into smaller
pieces according to the
diameter of feeding tube.
• Feed gradually for better
effect. When cutting soft
food, choose lower speed
to avoid the food turning
soupy. If large quantity food
needs to process, cut it for
several batches. 1200ml for
one batch.
Tips:
• Install the citrus juicer
attachment as shown
above.
• For citrus juicer function,
please choose low speed
setting “1”.
• For use, cut citrus fruit
in half and place on
the stainer cone. Then
press the fruit half gently
against the stainer cone to
squeeze juice.
1. Make sure the blade base is fixed
tightly to the jar bottom.
2. Put food into the jar.
3. Install jar lid and lid plug properly.
4. Put blender jar onto motor base
vertically, then rotate jar clockwise
to secure it in place.
Tips:
• Choose PULSE function for
pre-mixing is recommended
before operation.
• 1800ML for one batch.
• Lid jug can be used to measure or
add ingredients during operation.
CJ107_EN_A5_v1_20220721.indb 6CJ107_EN_A5_v1_20220721.indb 6 2022/7/21 17:082022/7/21 17:08

7
EN
Operation
Caution:
• This appliance incorporates a protective device against high temperatures. If appliance
overheats, the unit will turn off automatically. After cooling down sufficiently (about 15
minutes), it will resume operation automatically .
• DO NOT run the appliance continuously for more than 1 minute.
• If operation is not finished within 1 minute, turn off the machine and let cool for at least
10 minutes before next round of use. If more than 5 rounds of operation are required,
let the machine cool for at least 90 minutes to room temperature before the next 5
rounds. This can lengthen lifespan of the machine.
• Be careful when hot liquid is poured into the bowl or blender jar as it may be ejected
out due to a sudden steaming.
1. Turn the switch knob to select speed setting “0”, then plug in the appliance.
2. Turn the switch knob to select a suitable speed setting. The relative speed indicator light will
illuminate and the appliance will start to work.
3. Pulse function: Press down the switch knob and hold to start. Release to stop.
4. After use, select the speed setting “0”, then unplug and let the motor cool down.
Cleaning, Care & Maintenance
• Always disconnect from power supply before cleaning.
• Always allow to cool before cleaning.
• Let the motor come to a complete stop before disassembly and cleaning.
• Never immerse the motor base in water, nor rinse it under running water.
• Use warm, soapy water and a damp cloth to clean all removable parts.
• Dry thoroughly after cleaning.
Warning: Blade is sharp - handle with care.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault Probable Cause Solution
The unit is not working The unit is not switched on Check the unit is plugged in correctly
and switched on
Plug or lead is damaged Replace plug or lead
Fuse in the plug has blown Replace the plug fuse
Mains power supply fault Check mains power supply
Parts not mounted securely Mount the parts securely
Appliance stops working
suddenly
Appliance overheats thus auto
re-set is activated
Let the appliance cool sufficiently
Motor works while
components do not run
Driver not installed correctly Re-install the driver
CJ107_EN_A5_v1_20220721.indb 7CJ107_EN_A5_v1_20220721.indb 7 2022/7/21 17:082022/7/21 17:08

8
EN
Technical Specifications
Model Voltage Power Current
Processing bowl
Capacity Dimensions
h x w x d mm Weight
Max. Liquid
CJ107 220-240V~
50-60Hz
750W 5A 2000ml 1200ml 385 x 200 x 245 3.3kg
Electrical Wiring
This appliance is supplied with a 3 pin BS1363 plug and lead.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Compliance
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible for
waste disposal in your area.
Caterlite parts have undergone strict product testing in order to comply
with regulatory standards and specifications set by international,
independent, and federal authorities.
Caterlite products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Caterlite.
Every effort is made to ensure all details are correct at the time of going to press, however, Caterlite reserve the right to
change specifications without notice.
CJ107_EN_A5_v1_20220721.indb 8CJ107_EN_A5_v1_20220721.indb 8 2022/7/21 17:082022/7/21 17:08

DECLARATION OF CONFORMITY
• Conformiteitsverklaring • Déclaration de conformité • Konformitätserklärung • Dichiarazione di conformità •
• Declaración de conformidad
Equipment Type • Uitrustingstype • Type d'équipement • Gerätetyp
• Tipo di apparecchiatura • Tipo de equipo
Model • Modèle • Modell • Modello
• Modelo
Food Processor
CJ107
Application of Territory Legislation &
Council Directives(s)
Toepassing van Europese Richtlijn(en)
• Application de la/des directive(s) du
Conseil • Anwendbare EU-Richtlinie(n)
• Applicazione delle Direttive
• Aplicación de la(s) directiva(s) del
consejo
Low Voltage Directive (LVD) - 2014/35/EU
Electrical Equipment (Safety) Regulations 2016
EN 60335-1:2012 +A11:2014 +A13:2017 +A1:2019 +A14:2019 +A2:2019
EN 60335-2-14:2006 +A1: 2008 +A11: 2012 +A12:2016
EN 62233:2008
Electro-Magnetic Compatibility (EMC) Directive 2014/30/EU - recast of 2004/108/EC
Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091)
EN 55014-1:2017 +A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013 +A1:2019
Ecodesign energy-related products Directive 2009/125/EC
Regulation (EC) 1275/2008 - Standby and off mode power consumption
EN 50564:2011
Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex II to
Directive 2011/65/EU
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012 (S.I. 2012/3032)
Producer Name • Naam fabrikant • Nom du producteur • Name des Herstellers
• Nome del produttore • Nombre del fabricante
Caterlite
I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s)
and Standard(s).
Ik, de ondergetekende, verklaar hierbij dat de hierboven gespecificeerde uitrusting goedgekeurd is volgens de bovenstaande
Richtlijn(en) en Standaard(en).
Je soussigné, confirme la conformité de l'équipement cité dans la présente à la / aux Directive(s) et Norme(s) ci-dessus
Ich, der/die Unterzeichnende, erkläre hiermit, dass das oben angegebene Gerät der/den oben angeführten Richtlinie(n) und
Norm(en) entspricht.
Il sottoscritto dichiara che l'apparecchiatura di sopra specificata è conforme alle Direttive e agli Standard sopra riportati.
El abajo firmante declara por la presente que el equipo arriba especificado está en conformidad con la(s) directiva(s) y
estándar(es) arriba mencionadas.
Date • Data • Date • Datum • Data •
Fecha
24th June 2022
Signature • Handtekening • Signature
• Unterschrift Firma • Firma
Full Name • Volledige naam • Nom et
prénom • Vollständiger Name • Nome
completo • Nombre completo
Ashley Hooper
Eoghan Donnellan
Position • Functie • Fonction • Position
• Qualifica • Posición
Technical & Quality Manager
Commercial Manager/ Importer
Producer Address • Adres fabrikant •
Adresse du producteur • Anschrift des
Herstellers • Indirizzo del produttore •
Dirección del fabricante
Fourth Way,
Avonmouth,
Bristol,
BS11 8TB
United Kingdom
Unit 9003,
Blarney Business
Park,
Blarney,
Co. Cork
Ireland
DocuSign Envelope ID: B346A490-56A2-4A52-A9C6-FE81AD93FB2A
CJ107_EN_A5_v1_20220721.indb 9CJ107_EN_A5_v1_20220721.indb 9 2022/7/21 17:082022/7/21 17:08

UK
[phone]
Eire
NL 040 – 2628080
FR 01 60 34 28 80
BE-NL 0800-29129
BE-FR 0800-29229
DE 0800 – 1860806
IT N/A
ES 901-100 133
CJ107_EN_A5_v1_20220721.indb 10CJ107_EN_A5_v1_20220721.indb 10 2022/7/21 17:082022/7/21 17:08

CJ107_EN_A5_v1_20220721.indb 11CJ107_EN_A5_v1_20220721.indb 11 2022/7/21 17:082022/7/21 17:08

CJ107_EN_A5_v1_2022/07/21
CJ107_EN_A5_v1_20220721.indb 12CJ107_EN_A5_v1_20220721.indb 12 2022/7/21 17:082022/7/21 17:08