Cavalry CADB-U34 Series User manual

User's Manual
CADB-U34 Series

Preface
Copyright
Please respect copyrighted content. Duplication or modification of this publication in whole or in
part is prohibited without express or written authorization.
Usage
Strong impacts or dropping the product may cause damage. Only allow qualified personnel to
repair this product. Disassembling or opening this product will void your warranty.
Disclaimer
Cavalry is not liable for compensation for data loss which may result from a malfunction of the
product or from changes due to improper use, repairs, defects, or battery change. Please back
up your data to avoid unexpected losses. Cavalry reserves the right to make changes to the
content of this manual without notice. The most current manuals and software are available for
download at our download page: www.cavalrystorage.com/su_download.htm
2 2

Thank you for choosing Cavalry.
We at Cavalry extend our sincere gratitude for your purchase of this product.
We hope our dedication to delivering high quality products with excellent
customer service will ensure your continued interest in our products.
This manual will assist in the operation of the product. To optimize your
experience with this product, we recommend reading this entire manual
before usage. Please keep this manual for future reference.
3 3

Table of Contents
Preface .................................................................................................... 2
List of Accessories ............................................................................. 5
Product Illustrations ........................................................................... 6
Features ............................................................................................. 8
Setup Instructions .............................................................................. 9
Using Sychronized Sleep mode ......................................................... 14
Troubleshooting ................................................................................. 15
Warranty and Contact ........................................................................ 18
44

List of Accessories
1. External power adapter / power cord (may vary with product)
2. USB 2.0 cable
3. Resources CD
55
3
12

Front
11. LED status indicators 3. Hard drive bays
2. Removable cover 4. Drive release
66
2
3
4

Back
6
7
8
5. Silent-design ventilation fan
6. Power switch
7. Power jack
8. USB 2.0 port
9. Synchonized sleep switch
77
5
9

8
Features
(4) 7200RPM 3.5" SATA II hard drives inside a quad-bay aluminum enclosure
Plug-and-play for Windows 2000/XP/Vista
USB 2.0 interface
Pre-formatted to NTFS
Hot swappable, spring-loaded drive bays
LED light indicators
Large 8cm fan for near-silent operation
Designed for use with a PC, formattable for use with a Mac
8

Setup Instructions
Follow the steps below to successfully set up your Cavalry External Hard
Drive with your computer.
Step 1. Start your computer and wait for Windows or the Mac OS to load
completely.
Step 2. Connect the power adapter
to the drive. (Fig. 1) Then plug the
power adapter into an electrical outlet.
99
Fig. 1

Step 3. Connect the square end of the USB cable to the hard drive. Then
connect the flat end of the USB cable to the USB port on your computer.
Step 4. Turn the power switch on.
NOTE: Connect the USB cable to the drive before connecting the cable to
the computer. To disconnect, remove the cable from the computer first.
1110
USB Cable Plug
USB Port
Fig. 2 Fig. 3

Step 5. Installing drivers for the Cavalry External Hard Drive.
Windows 2000/XP/Vista
Plug-and-play. No device drivers or configuration required. The
computer will detect the CADB-U34 as two new USB devices and
display messages on the bottom-right corner reading "USB Mass
Storage Device Detected." After a few moments, a message at the
bottom-right should read "Your new hardware is installed and
ready to use."
Windows 98/Me
1. Make sure Windows 98/Me is fully updated
2. Download drivers from www.cavalrystorage.com/su_download.htm
by clicking on "Windows 98 Driver". Extract the file.
3. Navigate the device manager.
1110

4. Right-click on the yellow question mark indicating an unknown
external storage device.
5. When the device driver wizard starts, click on the "Browse" button
to select the search directory to find drivers.
6. Find the USB 2.0-98 driver in the extracted file.
7. Click "Next" to continue.
Mac OS X
Reformat the external hard drive using Disk Utility on the OS.
Step 6. Your external hard drive is now ready to use. If you go to "My
Computer" the CADB-U34 will show up as 2 separate volumes. For example,
you may see two new disk drives named "New Volume (E:)" and "New
Volume (F:)".
12 13

12 13
NOTE: The CADB-U34 is preconfigured in BIG / Spanning mode to allow the
four hard drives to function as two singular volumes, each with the capacity
of two drives. If you wish to change the configuration to JBOD, where the
four drives will be recognized as four separate drives, please email customer
service for assistance: [e-mail]

1514
Using Synchronized Sleep Mode
In Synchronized Sleep mode, your CADB-U34 senses when the computer to
which it is connected is in standby mode, hibernate mode, or is turned off.
The CADB-U34 will go to "sleep," stopping disk rotation and saving energy.
To Change the Synchronized
Sleep mode settings, make sure
the unit is on and booted up,
then use the switch on the back
of the unit labeled "System
Startup." (see right)
When this switch indicates "ON",
synchronized sleep mode is on.

Troubleshooting
LED light indicator does not turn on
Make sure the power adapter is securely connected to a working electrical
outlet. Secondly, make sure the USB cable is inserted correctly into the hard
drive and the computer. Turn on the power switch (page 7).
Computer does not detect hard drive
Make sure the USB cable is securely connected. If this still does not work,
attach another known working device and working cable into the USB port
on the computer. If the known working device is not detected, the problem
could be your computer's USB port. If the port and cable both work and the
hard drive is still not being detected, contact customer support.
1514

Loud noises coming from external hard drive
In most cases, loud noises coming from the drive suggest a defective drive or
a loose part. We apologize for any inconvenience this may cause. Please
contact customer service for assistance.
HDD1 / HDD2 / HDD3 / HDD4 LED lights become red
This indicates one of the drives may need replacing. Open the enclosure,
remove the failed hard drive and replace with the new drive. Close the unit.
Hard drive will not work with my Mac
Macs require special formatting. Format the hard drive according to the
Formatting Guide available in the "Contents" folder of the Resources CD or
download at: www.cavalrystorage.com/su_download.htm
16 17

If you have more questions, please refer to the Frequently Asked
Questions section online at: www.cavalrystorage.com/su_faq.htm. For
further inquiries, you may contact Bason/Cavalry tech support at
[email protected].
16 17

Warranty
This product comes with a one year warranty from the date of purchase.
Please register your product at www.cavalrystorage.com/prodreg.htm to
activate the warranty. Please have your Serial Number and Model Number
ready. We are not responsible for any loss of data. Please back up your data
often to avoid unexpected losses.
Contact
Cavalry Storage, Inc.
555 E. Easy St.
Simi Valley, CA 93065
[email protected]
www.cavalrystorage.com
18 19

18 19

CA1043
071008