CBR LEOPA-R BLACK SHINE M-071060 User manual

High specication
professional
straightening iron.
Triple coating and
less weight.
User Manual
Model No. M-071060
• Thank you for purchasing this product.
• For safety reasons, please read this user
manual and use the product correctly.
• There may be unnotied changes in colour or
design for improvement of performance or
product quality.
• When making requests for repairs please
attach the product warranty included in this
user manual.
GB

22
Precautions
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
• WARNING Do not use this appliance near bathtubs, showers, basins or other
vessels containing water.
• Do not disassemble the product.
• Dispose of the product in a designated location.
• Even if the power is off, if there is water nearby, unplug the product and store it in a dry location.
• Electrical circuitry in the bathroom must be equipped with a residual current device (RCD) that does
not exceed 30mA of rated electric current for additional protection.
• If the inside of the product becomes red when using the product, immediately stop using it and
unplug the cord.
• Check that the product is plugged in correctly.
• Do not use other electric heaters simultaneously on the same outlet, this could cause a re due
to overheating.
Safety related matters are classied as Warnings or Cautions as shown below depending on
the severity of the damage that could occur if an incident happens.
This product is a household appliance.
Please read this manual and follow the instructions carefully to prevent unexpected
danger or damage due to improper use of the product.
Warning Serious injury or death may occur if instructions are violated.
Caution Serious injury or product damage may occur if instructions are violated.

23
GB
Read this user handbook carefully for your safety and correct use
before using the machine
• This machine produces heat during operation. Take care to avoid contact with the
heating plate. Beware of the danger of burns.
• Please dry your hairs before procedure. Styling may be not perfect on wet hairs.We
recommend you towel-dry. Be careful of scalp burns and air damages caused by hot
steam.
• Procedure with high temperature (180°C~220°C) is easier to make hairs damaged.
• Be careful not to wet the appliance. Do not use it in humid places including bathrooms.
Electric accidents may occur.
• After use, wait the heater plate to be cooled. Keep things made of non-heat-resistant
materials away from the device.
• Do not pull off the power cable. Pressure to the power code or severe shocks may lead
disorder.
• The heating plate or the surface requires cleaning, switch off the mains, unplug it, and
wait it to be cooled.
Wipe it with a soft cloth.You cannot use solvent like benzene and thinner and wire
brushes.
• During operation, if it is wet with water or perm ingredient, stop using it immediately
and contact After-sales Service or your dealer.
• Do not attempt to use the machine anymore if you nd out any damages or cable cut-
off. Contact After-sales Service.
The manufacturer declines all liability for damage resulting from repair or replacement
by the users.
• The manufacturer will accept no responsibility for damage caused by improper use or
other purposes stated not in the instructions.

24
Plug the power cable in the socket not to be twisted.
The buzzer sounds; it is normal.
Press the Main button.
Default setting temperature 160°C appears in the FND temp display.
Press Temp button (+, -) to set the temperature users want.
During reaching the set temperature, the temp display indicates real-
time temperature.
When the temperature is set, the buzzer sounds.
Make your hairs neat and place them to the center of the heating plate.
Grab them lightly and comb with your ngers.
Do not stop combing or make fast; otherwise, marks remain on your
hairs or you cannot get the style you want.
If you disuse for 30 minutes, the device enters in the sleep mode. ([SLP]
displays and the heater is off.)
After then, alarm buzzer sounds for 30 minutes, with each 1 minute. If
you want to reuse in the sleep mode, touch the temp display or press
the button.
After transferring to the sleep mode (SLP displays), and the appliance
is still not performing for another 30 minutes, the main will be
automatically switched off.
Press the Main button.
After use, switch the appliance and unplug the cord from the power
supply.
Risk of burns! Wait the heater plate to be cooled.
Errors displays [888] and the appliance stops working. Stop
using and contact to A/S center.

25
GB
3 layers
FAST
3-way black coating
Black shine’s heating plate with 3-way black coating – Graphene, black
diamond and ceramic.
Get softer sliding and topmost styling!
Independent control
Fast preheating and temperature recoverability
With the independent control way, lesser preheating time and more
excellent temperature recoverability. It minimizes temperature change in
procure to avoid hair damage.
Cushion & Tilting
Not only minimizing hair cut-off by applying cushion and tilting method but
distributing heat to hairs for optimal procedure.
Ergonomic design
Reducing fatigue in long hours by ergonomic design and special technology.
Soft 360º rotate code
For users, it rotates 360° with untwisted code, which extends product
lifespan.
No anxiety! Applying a safety device
Designed to prevent electric issues and protect users through a hardware
device and software control.
Safe design! Sleep mode
If you disuse for 30 minutes, the device enters in the sleep mode. ([SLP]
displays and the heater is off.) Any electric problems can be avoided.
Free voltage
You can easily use it without a transformer in the world (100~240V).
(You may purchase a transforming adapter. Please contact us.)

26
A - heating plate: minimizes hair damages with 3-way black coating and tilting
cushion.
B - FND temp display: indicates the temperature of the heater plate (100~220°C)
C - Switch: controls the device with the mains and the temperature switch.
D - 360° rotate code: prevents the code from twisting in procedure.
PART DESCRIPTION

27
GB
Product name LEOPA·R BLACK SHINE
Model type M-071060
Voltage Free Voltage (100~240V)
50/60Hz
Absorbed power 25 W
Control type Micom independent control
Heater far-infrared ceramic heater
Temp range 100°C ~ 220°C
Code length 3 m
Size 263 x 37.8 x41mm
Weight 176 g
Product IRON HAIR
Manufactured by JMW, South Korea
THECNICAL DATA

28
EC Declaration of conformity
BALTASAR RODRIGUEZ LLORENTE, S.L.
C/Marina nº 155, local 6 08013 – Barcelona
WE DECLARE under our sole responsibility that the unit/device:
LEOPA·R BLACK SHINE
Make/Manufacturer CBR Pofessional
Model M-071060 LEOPA•R BLACK SHINE
Year of Manufacture 2019
complies with the norm(s) or published standard(s) below:
EN 60335-1 EN 60335-2-23 EN 62233 EN 61000-3-2 & 3-3 EN 55014-1 & 2
and complies with the key requirements and Directive(s) below:
The EU Low Voltage Directive (“LVD,” 2014/35/EU)
The EU Electromagnetic Compatibility Directive (“EMC,” 2014/30/EU)
The EU Waste Electrical and Electronic Equipment Directive (“WEEE,” 2012/19/UE)
The EU RoHS2 Directive (2011/65/UE)
Name, surname and position of the person authorized to prepare the Technical
Dossier and sign this declaration:
Baltasar Rodríguez Llorente
Place and date Signature
Barcelona, 26 de febrero de 2019

29
Product Warranty
※ Before using the product please read the user manual.
REPAIR REQUEST FORM
LEOPA•R BLACK SHINE
Model No.
Customer Customer name
Address
Telephone No
Purchase date Name and address of store
Year Month Day
Warranty period from day of
purchase
Telephone No
Reason for repair request
GB