CCS SE-65 Series User manual

- 1 -
Telecentric Lens SE-65/110 Series Operating Manual
Thank you for purchasing an SE-65/110-series Telecentric Lens.
To properly use the product and take full advantage of its functionality, read this operating manual before using the
product. After reading this operating manual, store it in a safe and readily accessible location.
*1 Calculations are based on a permissible circle of confusion diameter of 40 μm.
*2 These are calculated values.
*3 Theoretical resolution calculations are based on a wavelength of 550 nm.
• Do not disassemble or modify the product.
• Do not subject it to impact.
• The lens barrel has a lens at the object-side end. Do not hold it too tight. For details of the relevant part, refer to the
Dimensional Diagrams on the back of this manual.
• Handle the lens with care during daily use. Make sure no dust, dirt, or ngerprints adhere to the lens.
• Remove dust and dirt by blowing it off with air. Do not touch the lens with your hand.
• Use a lens cloth to wipe away any marks, such as ngerprints.
Application Precautions
1
SE-65 Series (WD 65mm)
2
Model
Coaxial SE-65VT08 SE-65VT10 SE-65VT15 SE-65VT20 S E- 6 5V T4 0
Straight SE-65ST08 SE-65ST10 SE-65ST15 SE-65ST20 SE-65ST40
Lens type Object-space telecentric lens (xed magnication)
Optical magnication 0.8 x ± 5% 1 x ± 5% 1.5 x ± 5% 2 x ± 5% 4 x ± 5%
WD 67.7 ± 2 mm 65.2 ± 2 mm 65 ± 2 mm 65.1 ± 2 mm 65.1 ± 2 mm
Depth of eld*1*2 1.85 mm 1.33 mm 0.59 mm 0.33 mm 0.13 mm
Optical resolution*2*3 12.4
μ m11.2 μ m7.5 μ m 5.6 μ m 4.3 μ m
NA*2 0.027 0.030 0.045 0.060 0.078
Actual F number (Fe)*2 14.9 16.8 16.7 16.7 25.4
TV distortion*2 -0.027 % -0.010 % -0.017 % - 0.013 % +0.006 %
Weight
Coaxial 50g 54g 37g 38g 40g
Straight 45g 49g 32g 33g 35g
Camera mount C mount
Maximum image size 1/1.8 "
Outer diameter Ø 20 mm Ø 16 mm
Lens barrel length 79.4 mm 89.4 mm 50.8 mm 53.2 mm 64.4 mm
Applicable wavelength 400 to 700nm
Object-image distance (O/I)
*2 164.6 mm 172.1 mm 133.3 mm 135.8 mm 147 mm
Focal length*2 90.7 mm 100.9 mm 19.2 mm 13.7 mm 9.5 mm
Operating environment Temperature: 0 to 40°C, Humidity: 85%RH max. (with no condensation)
Storage environment Temperature: -20 to 60°C (with no condensation)
Environmental regulations RoHS compliant, REACH compliant

- 2 -
*1 Calculations are based on a permissible circle of confusion diameter of 40 μm.
*2 These are calculated values.
*3 Theoretical resolution calculations are based on a wavelength of 550 nm.
SE-110 Series (WD 110mm)
3
Model
Coaxial SE-110V T08 SE-110VT10 SE-110V T15 SE-110V T20 SE-110VT40
Straight SE-110ST08 SE-110ST10 SE-110ST15 SE-110ST20 SE-110ST40
Lens type Object-space telecentric lens (xed magnication)
Optical magnication 0.8 x ± 5% 1 x ± 5% 1.5 x ± 5% 2 x ± 5% 4 x ± 5%
WD 110.4 ± 3.3 mm 110 ± 3.3 mm 114.1 ± 3.4 mm 110 ± 3.3 mm 110 ± 3.3 mm
Depth of eld*1*2 2 mm 1.6 mm 0.86 mm 0.65 mm 0.2 mm
Optical resolution*2*3 13.4
μ m13.4 μ m10.8 μ m10.8 μ m 6.6 μ m
NA*2 0.025 0.025 0.031 0.031 0.051
Actual F number (Fe)*2 16.0 19.9 24.0 32.0 39.5
TV distortion*2 -0.05 % -0.05 % +0.01 % -0.01 % +0.01 %
Weight
Coaxial 54g 56g 48g 50g 50g
Straight 49g 51g 43g 45g 45g
Camera mount C mount
Maximum image size 1/1.8 "
Outer diameter Ø 23 mm Ø 18 mm
Lens barrel length 8 3.1 mm 86.3 mm 76.4 mm 88.6 mm 84.9 mm
Applicable wavelength 400 to 700nm
Object-image distance (O/I)
*2 211 mm 213.9 mm 208 mm 216.1 mm 212.5 mm
Focal length*2 57.7 mm 44.4 mm 24.5 mm 24.5 mm 12.2 mm
Operating environment Temperature: 0 to 40°C, Humidity: 85%RH max. (with no condensation)
Storage environment Temperature: -20 to 60°C (with no condensation)
Environmental regulations RoHS compliant, REACH compliant
Copyright© 2013 CCS Inc. All Rights Reserved. Descriptions in this instruction guide are based on information available as of June 2013. KZ05705-T001-000
Ask any product queries to the following address or to your nearest CCS representative.
Shimodachiuri-agaru, Karasuma-dori, Kamigyo-ku,Kyoto 602-8011 Japan
E-mail : [e-mail] : [phone] Fax : [phone]
Headquarters
Use our website to nd your nearest CCS representative. http://www.ccs-grp.com/mvad/
Warranty Information
EXCEPT FOR THE EXPRESS WARRANTIES STATED IN THIS DOCUMENT, CCS MAKES NO ADDITIONAL WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, AS TO ANY MATTER
WHATSOEVER. IN PARTICULAR, ANY AND ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
EXCEPT AS EXPRESSLY SET FORTH HEREIN, CCS MAKES NO WARR ANTIES WITH RESPECT TO THE PRODUCTS.
WARRANTY PERIOD: ONE YEAR, STARTING FROM CCS Inc. SHIPPING DATE.
CCS Inc. WILL REPAIR OR REPLACE THE PRODUCT FREE OF CHARGE IF IT SHOULD FAIL TO FUNCTION WITHIN THE SPECIFIED WARRANTY PERIOD. IF EITHER OF THESE
CONDITIONS OCCURS, PLEASE TAKE THE PRODUCT TO YOUR CCS SALES REPRESENTATIVE.
WARRANTY TERMS
1 CCS Inc. WILL REPAIR OR REPLACE THE PRODUCT FREE OF CHARGE IF IT SHOULD FAIL TO FUNCTION UNDER USE ON OUR SPECIFIED CONDITION IN ACCORDANCE WITH
THE INSTRUCTION GUIDE AND OTHER WRITTEN CAUTIONS DURING THE INDICATED WARRANTY PERIOD OF ONE YEAR.
2 CCS Inc. WILL CHARGE A REPAIR FEE UNDER THE FOLLOWING CONDITIONS:
1) IF THE PRODUCT HAS BEEN SUBJECTED TO MISUSE, UNAUTHORIZED REPAIRS, OR MODIFICATION FROM ITS ORIGINAL DESIGN.
2) IF THE PRODUCT HAS BEEN DAMAGED FROM IMPACTS DUE TO INAPPROPRIATE HANDLING.
3) IF DAMAGE TO THE PRODUCT RESULTS FROM EXTERNAL CAUSES INCLUDING ACCIDENTS, FIRE, POLLUTION, RIOTS, COMMUNICATION FAILURES, EARTHQUAKES,
THUNDERSTORMS, WIND AND FLOOD DAMAGE, OR ANY OTHER ACT OF PROVIDENCE, OR FROM ANY EXTRAORDINARY CONDITIONS SUCH AS ELECTRICAL SURGES,
WATER LEAKAGE, CONDENSATION, OR THE USE OF CHEMICALS.
4) IF THE DAMAGE RESULTS FROM CONNECTION TO ANY POWER SUPPLY OR TO ANY EQUIPMENT WHICH CCS Inc. DOES NOT MANUFACTURE OR DOES NOT SPECIFY FOR USE.
3 CCS ASSUMES NO LIABILITY FOR ANY PURCHASER’S SECONDARY DAMAGE (DAMAGE OF EQUIPMENT, LOSS OF OPPORTUNITIES, LOSS OF PROFITS, ETC.) OR ANY OTHER
DAMAGE RESULTING FROM A FAILURE OF OUR PRODUCT.
THIS WARRANTY INFORMATION PROVIDES THE SCOPE OF CCS'S PRODUCT WARRANTY WITHIN THE SPECIFIED PERIOD, AND DOES NOT INDICATE OR IMPLY ANY FURTHER
GUARANTEE BEYOND THE WARRANTY TERMS.
CONTACT CCS FOR INQUIRIES OR INFORMATION ON REPAIRS TO THE PRODUCT AFTER THE EXPIRATION OF THE WARRANTY.

- 3 -
Dimensional Diagrams (SE-65 Series)
4
Coaxial Lenses Straight Lenses
(Unit: mm)(Unit: mm)
(WD 67.7)
8
(O/I=164.6)
17.526
7.518.8
4
(Ø16)
(Ø16)
79.4
21
(Ø20)
(Ø16)
(Ø16)
(Ø16)
Ø29
Ø29
Ø29
Ø29
Ø29
Ø29
(Ø8)
Ø29
Ø29
Ø29
Ø29
SE-65ST08
SE-65VT08
SE-65VT10
SE-65VT15
SE-65VT20
SE-65VT40
SE-65ST10
SE-65ST15
SE-65ST20
SE-65ST40
63xM3
63xM3
63xM3
63xM3
63xM3
42xM3
42xM3
63xM3
63xM3
17.526
(WD 65.2)
8
(O/I=172.1)
4
89.4
(Ø20)
21 28.8 7.5
63xM3
63xM3
63xM3
(WD 65) 17.526
17.526
13
(O/I=133.3)
21 7.5
4
3.8
50.8
(WD 65.1)
(O/I=135.8)
13
7.5
21
6.2
4
53.2
11
17.526
(O/I=147)
(WD 65.1)
21 7.518.5
64.4
4
17.526 (WD 67.7)
(O/I=164.6)
8
(Ø16)
(Ø16)
(Ø8)
(Ø8)
(Ø8)
(Ø8)
(Ø20)
(Ø20)
(Ø16)
(Ø16)
(Ø16)
79.4
21 7.5
18.8
3
Ø15.5
Ø15.5
Ø15.5
Ø15.5
Ø15.5
20
42.6 4
(WD 65.2)
17.526
(O/I=172.1)
8
28.8
89.4
21 7.5
4
20
3
42.6
13
17.526
17.526
(WD 65)
(O/I=133.3)
4
20
3
21 7.5
3.8
50.8
29
42xM3
42xM3
42xM3
(WD 65.1)
(O/I=135.8)
13
4
29
53.2
21 6.2 7.5
20
3
(WD 65.1) 17.526
(O/I=147)
11
27.9
64.4
21 18.5 7.5
4
3
20
C mount
C mount
C mount
C mount
C mount
C mount
C mount
C mount
C mount
C mount
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Hexagon socket set screws
Hexagon socket set screws
Hexagon socket set screws
Hexagon socket set screws
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)

- 4 -
Dimensional Diagrams (SE-110 Series)
5
(Unit: mm)(Unit: mm)
Coaxial Lenses Straight Lenses
SE-110VT08 SE-110ST08
SE-110ST10
SE-110ST15
SE-110ST20
SE-110ST40
SE-110VT10
SE-110VT15
SE-110VT20
SE-110VT40
8
17.526
(O/I=211)
(WD 110.4) 83.1
21 14.5 7.5
4
(Ø8)
50.6
20
Ø15.5
Ø15.5
Ø15.5
Ø15.5
Ø15.5
3
(Ø
23)
(Ø16)
(Ø16)
(Ø16)
(Ø16)
(Ø16)
(Ø16)
(Ø18)
(Ø18)
(Ø18)
Ø29
Ø29
Ø29
Ø29
Ø29
(Ø23)
(Ø23)
Ø29
Ø29
Ø29
Ø29
Ø29
63xM3
63xM3
63xM3
63xM3
63xM3
63xM3
63xM3
63xM3
63xM3
63xM3
42xM3
42xM3
42xM3
4
2xM3
4
2xM3
(WD 110) 17.526
17.526
17.526
17.526
17.526
17.526
17.526
17.526
8
(O/I=213.9)
3
86.3
(Ø8)
(Ø8)
(Ø8)
(Ø8)
21 17.7 7.5
4
50.6
20
(Ø23)
(Ø16)
14
(WD 114.1)
(O/I=208)
76.4
21
43.1
15.3 7.5
4
3
(Ø16)
(Ø16)
(Ø16)
(Ø18)
(Ø18)
(Ø18)
20
14
(WD 110)
(O/I=216.1)
88.6
3
21 27.5
7.5
43.1 4
20
(WD 110)
11
(O/I=212.5)
84.9
21
3
30.4
7.5
4
36.5
(O/I=211)
8
17.526 (WD 110.4)
21 14.5 7.5
4
83.1
(WD 110)
8
(O/I=213.9)
4
86.3
21 7.517.7
14
(WD 114.1)
(O/I=208)
76.4
21 15.3 7.5
4
14
(WD 110)
(O/I=216.1)
88.6
21 27.5 7.5
4
(WD 110)
11
(O/I=212.5)
84.9
30.4
21
4
7.5
C mount
C mount
C mount
C mount
C mount
C mount
C mount
C mount
C mount
C mount
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Adjustment for camera rotation axis
Hexagon socket set screws
Hexagon socket set screws
Hexagon socket set screws
Hexagon socket set screws
Hexagon socket set screws
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)
Do not hold (Lens)