- 9 -
- From the list of devices found, select the " BT1000 ".
- If required, enter the PIN code "0000" and confirm the
entry. If the pairing process was successful, you will hear a
signal tone and the indicator lights blue for 3 seconds. (Note:
The PIN code is preprogrammed and cannot be changed.)
- After pair ing, the BT1000 automatically connects with the
cell phone. For some cell phones, you have to manually
confirm the connection. Next, the BT 1000 changes to
standby mode and the indicator light flashes blue every 10
seconds.
Note: If the pair ing is not completed within 2 minutes, the
BT 1000 turn s off again. In this case, repeat the pair ing
procedure .
7.
7.
7.
7. Multi-connection
Multi-connection
Multi-connection
Multi-connection function
function
function
function
The multi-connection function allows the simultaneous use
of the BT1000 with two cell phones. This is advantageous
for users with a personal and a business cell phone.
