Celsius CELMFT200 User manual


This page is intentionally left blank

General Care and Safety Guide
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF
THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
1. Use only the voltage specified on the rating label
of the Electric Blanket.
2. It is recommended that this Electric Blanket is
plugged directly into the wall socket. Power
boards are not rated to supply power to high
wattage appliances.
3. A correctly specified, undamaged extension cord
may be used with this Electric Blanket provided it
is used in a safe manner.
4. Do not operate this Electric Blanket with a
damaged cord, plug or after the Electric Blanket
malfunctions in any manner. Return to a qualified
electrical person for examination, electrical
service or repair.
5. This Electric Blanket is intended for household
use only and not for commercial or industrial use.
6. Use this Electric Blanket only as described in this
manual. Any other use is not recommended by
the manufacturer and may cause fire, electrical
shock or injury.
7. Do not operate with cord set coiled up as a heat
build up is likely, which could be sufficient to
become a hazard.
8. Do not use heavy or dense over blankets as they
may lead to overheating of the Electric Blanket.
9. Do not trap, wrap or fold cords between bed slats,
mattress, or springs, or against walls, headboards
or bed frame as this may cause damage to the
cord.
10. Carry out regular checks of the supply cord to
ensure no damage is evident.
11. Do not pinch, flex, or expose the heating wire.
Damaged heating wire may cause a fire hazard or
personal injury.
12. Do not use the Electric Blanket on a bed used by
an infant, incapacitated person, paraplegic,
quadriplegic, diabetic, or by any person
insensitive to heat or other vulnerable persons
who are unable to react to overheating.
13. This Electric Blanket is not intended for use by
persons (including children) with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the Electric Blanket by a
person responsible for their safety.
14. This product is not intended for medical use in
hospitals.
15. The power cord must be routed to the head of the
bed to prevent being sat on or rolled on when getting
in and out of the bed.
16. Do not place power cord under carpet or cover with
rugs or furniture. Arrange the cord so it cannot be
tripped over.
17. Do not use this product on a damp mattress or on a
water bed.
18. If you find any damage to your Electric Blanket, if
your Electric Blanket does not work, or is not
working properly, contact the place of purchase or
the Celsius Customer Services Team.
19. Repair work on the Electric Blanket by unqualified
persons can cause serious risk to the user. Only use
a qualified electrician.
20. There are no user serviceable parts installed in the
Electric Blanket.
21. Do not use on an adjustable bed.
22. Turn off the Electric Blanket and disconnect the
power cord when not in use.
23. Ensure hands are dry before handling the plug or
controls.
24. Do not dry clean the Electric Blanket. Do not use
bleach or harsh cleaning fluids as the cleaning liquid
may damage the insulation of the heating element.
25. Do not use any pins, needles, safety pins or other
sharp items on your Electric Blanket as they will
damage the electric wiring.
26. Keep all dogs, cats, and other pets away from the
Electric Blanket.
27. Never use the Electric Blanket to dry clothes.
28. Do not tuck in the Electric Blanket as this may cause
over heating and/or fire.
29. The Electric Blanket can be used only with the
Electric Blanket control provided by the
manufacturer. Any other Electric Blanket control may
cause overheating and/or fire.
30. Indoor use only.
31. Children should be supervised to ensure that they do
not play with the Electric Blanket.
32. Do not unplug the product by the power cord while in
use. Always turn the power off at the power outlet
before you remove the plug. Remove by grasping
the plug;do not pull on the cord.
33. Never sleep with the blanket on in aheat position.
34. The blanket must not be powered on when folded.
Always ensure the blanket is laid flat without kinks or
overlaps.
Thank you for choosing a Celsius Electric Micro Fleece Throw. This Throw has been
designed and manufactured to high standards of engineering and with proper use and
care, as described in this booklet, will give you years of useful service. Please read these
instructions carefully and keep for future reference.

BEFORE FIRST USE
NOTE: This electric throw is to only be used as an over blanket.
Before using your Electric Throw for the first time:
1) The Electric Throw needs to be unfolded and laid flat before switching on.
2) We recommend that you switch your Electric Throw to the maximum setting for two to three
hours before using then reduce the heat setting to your desired comfort level.
EVERYDAY USE
With normal use your Electric Throw will require 15 minutes of preheating before use.
IMPORTANT: Never sleep with your Electric Throw turned on.
9 HEAT CONTROLLER
The control features an On/Off switch and two buttons to control the heat settings and the timer.
It also has an LED readout for temperature and timer settings.
OPERATING INSTRUCTIONS
NOTE: When using the Throw some people may experience a tingling sensation whether alone
or when touching someone else using an Electric Throw.
This “tingling sensation” is known as an electric field effect and caused by the current flowing
through the elements creating an Electromagnetic Field (EMF). Some people may be more
sensitive to feeling the EMF tingling sensation than others. It is known to occur across all makes
and models.
This is no cause for concern and is in no way an electric shock.
Important Instructions
1. You can program your Electric Throw to work for 1-9
or 12 hours and with 1-9 heat settings.
2. Plug into the mains power supply and switch on the
power mains.
3. Switch on the Electric Throw with “On/Off” button.
4. The LED for timer and temperature will be
illuminated.
5. By pressing the Temp button you will be able to
adjust the heat settings from 1–9, 1 being lowest
and 9 being highest. This will be indicated with the
left LED.
6. You can also set the timer to turn the Electric Throw
off after a predetermined time being 1-9 hours or 12
hours. By pressing the Timer button you will be able
to adjust the number of hours from 1-9 (press once
for each hour), pressing one more time will show “H”
illuminated on the heat controller which indicates the
timer is set to 12 hours. This will be indicated with
the right LED.
Retain for future use
LED Readout
Timer Button
On/Off Switch
Temperature
Button

STORING YOUR THROW
Always allow the Electric Throw to cool before folding and storing. Remove the control and roll or fold
the Electric Throw loosely and store it in a bag or the bag it was supplied in. Avoid pressing sharp
creases into the Electric Throw; for example do not store it under other items that may result in
bending the wires of the Electric Throw.
CARE & CLEANING OF YOUR ELECTRIC BLANKET
Taking care of your Electric Blanket is easy and safe as long as you follow the steps outlined below:
DO NOT dry clean your Electric Throw. Dry cleaning will damage the wiring.
DO NOT use bleach or dry cleaning fluids.
DO NOT use a wringer.
DO NOT iron the Electric Throw.
DO NOT turn on the Electric Throw until it is completely dry.
DO NOT use mothballs or sprays of any kind.
SPOT CLEANING
Unplug and remove the control from the Electric Throw.
Wet sponge the affected area using a mild soap and lukewarm water solution. Ensure the water
temperature is less than 30°C.
Gently sponge the affected area with clean water.
Use a neutral coloured towel to absorb excess water.
HAND WASHING
Unplug and remove the Electric Throw control.
Fold and pre-soak the Electric Throw for 15 minutes in a mild soap and lukewarm water solution.
Ensure the water temperature is less than 30°C.
Gently squeeze the soap suds through for a few minutes.
Rinse in fresh lukewarm water.
MACHINE WASHING
Unplug and remove the Electric Throw control.
Fold and presoak the Electric Throw for 15 minutes in a mild soap and lukewarm water solution.
Ensure the water temperature is less than 30°C.
Wash in mild soap and lukewarm water on the delicate or gentle cycle for 2 minutes.
Rinse in fresh lukewarm water.
AIR DRYING
Gently stretch the Electric Throw to its original size.
Air dry over a clothes line or shower rod. (DO NOT use clothes pegs or clips of any kind).
DO NOT use the Electric Throw until it is completely dry.
Important Instructions
Retain for future use

MACHINE DRYING
Preheat the dryer on the low temperature setting for 2 minutes.
Place the throw into the dryer and tumble dry on low setting for a maximum of 20 minutes until damp.
Remove the throw while it is still damp and gently stretch to its original size.
Continue to air dry over a clothes line or shower rod. (DO NOT use clothes pegs or clips of any kind).
Do not use the throw until it is completely dry.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
SUPPORT AND TECHNICAL ADVICE
Celsius –New Zealand
Monday –Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
Celsius –Australia
Monday –Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
TECHNICAL SPECIFICATION
Model No: CELMFT200
Supply:220-240VAC 50Hz
Wattage: 100W
Important Instructions
Retain for future use

Thank you for purchasing this Celsius product. Your product is warranted against faults and manufacture when used in
normal domestic use for a period of one year. In non-domestic use Celsius limits the voluntary warranty to three
months.
Celsius undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault
during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out
by anyone other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and remedies available to you under law in
relation to the goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).
One Year Warranty
Celsius One Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase Date Of Purchase
Name Of Product Model Number
Attach a copy of the purchase receipt to this warranty card
Celsius –New Zealand
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.celsius.co.nz
Celsius –Australia
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 465 324
www.celsiusforhome.com.au
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.

Other manuals for CELMFT200
1
Table of contents
Other Celsius Accessories manuals
Popular Accessories manuals by other brands

wtw
wtw IFL 700 IQ operating manual

Contours
Contours CHILD TRAY V2 manual

LASERLUCHS
LASERLUCHS PICO-TRACKER-V1 Customer's manual

Interlogix
Interlogix FlexPI Quick start installation guide

Schulte
Schulte EVOline FlipTop Mounting instruction

PCB Piezotronics
PCB Piezotronics S101A02 Installation and operating manual