CentoLight Scenic W504 User manual

Carefully read this manual and properly take care of it
Leggete questo manuale e conservatelo per future consultazioni
User Manual
Manuale Utente
4x50W Warm + Pure White LED PAR with 25° beam for indoor use
PAR per uso interno con 4 LED da 50W Bianco Caldo + Puro e apertura a 25°
ENG
ITA
Scenic W504Scenic W504

22
Dear customer,
First of all thanks for purchasing a CENTOLIGHT® product. Our mission is to satisfy
all possible needs of light designers and professionals of entertainment lighting, by
offering a wide range of products based on the latest technologies.
We hope you will be satisfied with this fixture and, if you want to collaborate, we
are looking for a feedback from you about product operation and possible im-
provements to be introduced in the next future. Go to our website www.centolight.
com and send an e-mail with your opinion; this will help us to build equipment ever
closer to professional’s real requirements.
The CENTOLIGHT Team
Gentile Cliente,
Grazie per aver scelto un prodotto CENTOLIGHT®. La nostra missione è quella di
soddisfare ogni possibile richiesta da parte di light designers e professionisti dell’il-
luminotecnica per l’intrattenimento, offrendo una vasta gamma di apparecchiature
basate su tecnologie di ultima generazione.
Speriamo di aver soddisfatto le vostre aspettative e, se voleste collaborare, sarem-
mo lieti di ricevere un vostro feedback sulla qualità del prodotto al fine di migliorare
costantemente la nostra produzione. Visitate il nostro sito www.centolight.com ed
inviateci una mail con la vostra opinione; questo ci aiuterà a sviluppare nuovi pro-
dotti quanto più vicini alle vostre esigenze.
Il Team CENTOLIGHT

33
Eng
Table of ConTenTs
1 - Before you Begin 4
1.1. What is included- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.2. Unpacking Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.3. Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.4. Disclaimer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
2 - Safety Instructions 5
2.1. Symbols Meaning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
3 - Mounting and Rigging 6
3.1. Rigging - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
3.2. Water / Moisture - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
3.3. Heat - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
3.4. Servicing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
4 - Introduction 7
4.1. Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
4.2. Product Dimensions and Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
5 - Product Setup 9
5.1. Rear Panel Description- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
5.2. About Power Connection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
5.3. About Dmx Connection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
5.4. DMX Terminator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
5.5. 3-Pin vs 5-Pin DMX cables - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
6 - Menu Operation 12
6.1. Set DMX Address - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
6.2. DMX Channel Assignments and Values - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
6.3. Fan Noise & LED Temperature Control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
6.4. Master/Slave Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
7 - Troubleshooting 14
8 - Specication 15
9 - Warranty And Service 16
10 - Warning 16

44
SCENIC W504 User Manual
Eng
1 - before you begin
Thank you for purchasing SCENIC W504. Enjoy your new equipment and make sure
to read this manual carefully before operation! This user manual is made to provide
both an overview of controls, as well as information on how to use them.
1.1. What is included
Package include:
y1x CENTOLIGHT SCENIC W504 PAR light
y1x 1m (40in ca.) Powercon to Europlug power cable
y1X 2m (79in ca.) DMX Cable 3-pin XLR-M to 3-pin XLR-F
yThis User Manual
ATTENTION: Packaging bag is not a toy! Keep out of reach of children!!! Keep in
a safe place the original packaging material for future use.
1.2. Unpacking Instructions
Carefully unpack the product immediately and check the content to make sure all
the parts are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged
from shipping, or show signs of mishandling, notify the carrier or dealer/seller imme-
diately. In addition, keep the box and contents for inspection.
If the fixture must be returned to the manufacturer, it is important that it is returned
in the original manufacturer box and packing. Please do not take any action without
first contacting your dealer or getting in touch with our after-sales support service
(visit www.centolight.com for details).
1.3. Accessories
CENTOLIGHT can supply a wide range of quality accessories that you can use with
your SCENIC Series equipment, like Cables, Splitters, DMX controllers, Consumables,
and a wide range of other fixtures.
All products in our catalogue has been long tested with this device, so we recom-
mend you to use Genuine CENTOLIGHT Accessories and Parts.
Ask your CENTOLIGHT dealer or check out our website www.centolight.com for any
accessories you could need to ensure best performance of the product.

55
SCENIC W504 User Manual
Eng
1.4. Disclaimer
The information and specifications contained in this User Manual are subject to
change without notice. CENTOLIGHT assumes no responsibility or liability for any
errors or omissions and reserves the right to revise or to create this manual at any
time.
Copyright© 2021 CENTOLIGHT. All rights reserved.
2 - safeTy insTruCTions
yRead these instructions
yKeep these instructions
yHeed all warning
yFollow all instructions
2.1. Symbols Meaning
The symbol is used to indicate that some hazardous live termi-
nals are involved within this apparatus, even under the normal
operating conditions, which may be sufficient to constitute the
risk of electric shock or death.
The symbol is used to describe important installation or config-
uration problems. Not following advice and information on how
to avoid such problems may lead to product malfunction.
This symbol indicates a protective grounding terminal.
WARNING: Describes precautions that should be observed to prevent the
danger of injury or death to the operator.
To protect the environment, please try to recycle packing materi-
al and exhausted consumables as much as possible.
This symbol indicates that the fixture is intended to indoor use
only. Keep the machine dry and do not expose to rain and mois-
ture.
Don’t throw this product away just as general trash, please deal
with the product follow the abandon electronic product regula-
tion in your country.

66
SCENIC W504 User Manual
Eng
3 - MounTing and rigging
Pay attention to safety! Please respectively consider the EN 60598-2-17 and the
national standard during the installation. Only authorized technicians can carry
out the installation.
3.1. Rigging
yThe installation of the fixture has to be built and constructed in a way that it
can hold 10 times the weight for 1 hour without any harming demolition. The
installation must always be secured with a secondary safety attachment, e.g. an
appropriate catch net. This secondary safety attachment must be constructed in
a way that no part of the installation can fall down if the main attachment fails.
yWhen rigging, de-rigging or servicing the fixture staying in the area below the
installation place, on bridges, under high working places and other endangered
areas is forbidden. The operator has to make sure that the safety measure and
the machine’s technical installation is approved by an expert before taking into
operation for the first time and after changes before taking into operation an-
ther time. He has also to make sure that an expert approves safety measure and
the machine’s technical installation once a years.
IMPORTANT: Overhead rigging requires extensive experience, including (but not
limited to) calculating working load limits, installation material being used, and
periodic safety inspection of all installation material and the projector. If you
lack these qualications, do not attempt the installation yourself, but instead
use a professional structural rigger. Improper installation can result in bodily
injury or property loss.
yIf the fixture shall be lowered from the ceiling or high joists, professional trussing
systems have to be used. The fixture must never be fixed swinging freely in the
room.
CAUTION: Use appropriate clamps to rig the xture on the truss. Make sure that
the device is xed properly! Ensure that the structure (truss) to which you are
attaching the xtures is secure.
3.2. Water / Moisture
yThe product is for indoor use. In order to prevent risk of fire or electric shock, do
not expose to rain or moisture

77
SCENIC W504 User Manual
Eng
yThe unit can not be used near water; for example near a bathtub, a kitchen sink,
a swimming pool, etc.
3.3. Heat
yDo not use in a confined space. Always install the product in a location with
adequate ventilation, at least 20in (50 cm) from adjacent surfaces. Be sure that
no ventilation slots on the product’s housing are blocked.
yThe apparatus should be located away from heat sources such as radiators,
stoves or other appliances that produce heat.
Don not use it when maximum ambient temperature is higher than 50°C. Work
temperature ranges from -20°C to 50°C (-4°F to 122°F).
3.4.Servicing
yDo not implement any servicing other than those means described in the man-
ual. Refer all servicing to qualified service personnel only. The internal compo-
nents of the equipment must be purchased from the manufacturer. Only use
accessories/attachments or parts recommended by the manufacturer.
4 - inTroduCTion
Scenic W504 is a compact and lightweight LED Par designed for live events, club
installations and all those indoor applications where white lights with different color
temperature and narrow beam (25°) are required. The light source features 4x50W
LEDs (2 Warm White @ 3200°K; 2 Pure White @ 5600°K) that can be mixed accord-
ing to the light designer needs.
Its main strengths are reliability and flexibility. The first is based on the quality and
selection of LED chips, the quality of optical lenses and the use of digital processor
technology for LED chip temperature and fan speed control in order to preserve LED
life and light brilliance. The second point, flexibility, means that the user can turn
off the fan by renouncing part of luminance and make the fixture totally silent. This
could be very useful to rental companies and professionals in all those situations
“on the fly”, where total silence is needed (houses of worship, theaters, conference
halls, etc.) and do not have silent white fixtures enough or simply because the in-
stallation requires more fixtures than those available.
Scenic W504 is the solution for any type of white lighting, without problems any-
where.
4.1. Features
yHigh brightness / long lifespan LED chips with high-quality lens

88
SCENIC W504 User Manual
Eng
yUp to 109000 lux @ 1m
yWarm White (3200°K) and Pure White (5600°K) color mixing
yFlicker-free LED emission for broadcast applications
yDMX-512 control with RDM
y25° beam angle with advanced dimmer system and strobo effects
yIntelligent fan speed and control
yLightweight aluminum housing with all-directional ventilation system
4.2.Product Dimensions and Overview
253mm (9.96”)
282mm (11.10”)
295mm (11.61”)
Ø228mm (8.98”)
282.2mm (11.11”) 282.2mm (11.11”)
295mm (11.61”)
158.5mm (6.24”)
138.5mm (5.45”)
228mm (8.98”)
228mm (8.98”)
138.5mm (5.45”)
Brackets
Adjustment
knob
Security
eye-bolt
Power & DMX
Connections
Display &
Control Panel

99
SCENIC W504 User Manual
Eng
5 - ProduCT seTuP
5.1. Rear Panel Description
MENU UP DOWN ENTER
1
2
The operation panel includes the LED display and control button operation area.
1) 4 Digit LED Display
It shows the operating mode and other system information.
2) Control Buttons
MENU Button - Short-press it to switch the setting pages.
UP Button - It scrolls up individual items in the selection menu and sub-menus for
system settings (DMX address, Operation Mode, etc.), and increases values/settings
of parameters.
DOWN Button - It scrolls down individual items in the selection menu and sub-
menus for system settings (DMX address, Operation Mode, etc.), and increases
values/settings of parameters.
ENTER Button - Press ENTER to access menu levels and confirm parameter value
changes.
DMX POWER
IN OUTIN OUT
34
3) Power Input/Output Sockets
Plug the power-cord included with Scenic W504 into an AC socket properly config-
ured for this fixture. Please read “5.2. About Power Connection” on page 10 for
details. This fixture is also equipped with an output power connector to be used as
power mains source in case of cascade connection up to a maximum of 5 fix-
tures.

1010
SCENIC W504 User Manual
Eng
1st Unit 5th Unit4th Unit3rd Unit2nd Unit
Power Input
100-240Vac - 50/60Hz
4) DMX Input/Output Sockets
DMX Input is a 3-pin male XLR socket for connection to a DMX control device. DMX
output is a3-pin female socket for sending the DMX control signal to other units.
5.2. About Power Connection
yAlways make sure that the voltage of the outlet you are connecting the product
to is within the range stated in paragraph “8 - Specification” on page 15 or
rear panel of the product (AC110V-240V 50/60Hz).
yMake sure the power cord is not crimped or damaged. Never connect this prod-
uct to a dimmer pack or rheostat.
yNever disconnect the product from power cord by pulling or tugging on the cord.
yTo avoid electric shock, all fixtures must be connected to circuits with a suitable
ground and circuit breaker.
yWire correspondence is as follows:
Cable (EU) Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
Earth must be connected! Always pay attention to safety! Before taking into
operation for the rst time, the installation has to be approved by an expert.
5.3. About Dmx Connection
When use a DMX controller, please make sure that there is no interference
sources (e.g. intercom, high frequency radio waves and radiation source).
DMX machines are designed to receive data through a serial Daisy Chain. A Daisy
Chain connection is where the DATA OUT of one fixture connects to the DATA IN of
the next fixture. The order in which the machines are connected is not important
and has no effect on how a controller communicates to each of them. Use an order

1111
SCENIC W504 User Manual
Eng
that provides for the easiest and most direct cabling.
3-Pin XLR
Pin 1: GND
Pin 2: DMX -
Pin 3: DMX +
OUTPUTINPUT
DMX use of 3-Pin XLR Connectors
DMX Termonator
Unit 1 Unit 2 Last Unit
DMX 512
Connect machines using shielded 2-conductor twisted pair cable with 3-pin XLR
male to female connectors. The shield connection is pin 1, while pin 2 is Data Nega-
tive (S-), and pin 3 is Data positive (S+).
CAUTION: Wires must not come into contact with each other; otherwise the x-
tures will not work at all, or will not work properly.
5.4.DMX Terminator
120ohm, 1/4W
Resistor
DMX Terminator
DMX is a resilient communication protocol, however errors still
occasionally occur. In order to prevent electrical noise from dis-
turbing and corrupting the DMX control signals, a good habit is to
connect DMX output of last fixture in the chain to a DMX termina-
tor, especially over long signal cable runs.
The DMX terminator is simply an XLR connector with a 120
(ohm), 1/4 Watt resistor connected across Signal (-) and Signal (+),
respectively, pins 2 and 3, which is then plugged into the output
socket on last projector in the chain. The connections are illustrat-
ed below.
Complimentary signal cable can transmits signals to 20 unit xtures at most.
Signal amplier is a must to connect more xtures.
5.5. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and fixtures manufacturers are not
standardized around the world. However, two are the most common standards:
5-Pin XLR and 3-Pin XLR system. If you wish to connect this fixture to a 5-Pin XLR in-
put fixture, you need to use an adapter-cable or make it by yourself. Below you can
see the wiring correspondence between 3-Pin and 5-Pin plug and socket standards

1212
SCENIC W504 User Manual
Eng
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
6 - Menu oPeraTion
By pressing MENU button, the display will cycle through 12 different menus. Press
ENTER button to enter the corresponding menu, press UP or DOWN to modify cur-
rent parameter value. Then, press ENTER button again to save current value.
No. Menu Function
1 d--- DMX512 address code setting: 001-512. When there is an incoming DMX signal, the
lower right corner indicator lights up
2 r--- Pure White 1 brightness adjustment: 0-255
3 G--- Warm White 1 brightness adjustment: 0-255
4 b--- Pure White 2 brightness adjustment: 0-255
5 n--- Warm White 2 brightness adjustment: 0-255
6 F---
Stroboscopic/speed adjustment:
0 = N/C
1-84 = lightning strobo
85-169 = random strobo
170-255 = standard stroboscopic
7Pr-- (Internal
Preset)
PR01 Pure White 1
PR02 Warm White 1
PR03 Pure White 2
PR04 Warm White 2
PR05 Pure White 1 + Warm White 1
PR06 Pure White 1 + Pure White 2
PR07 Warm White 1 + Warm White 2
PR08 All LED Bright
PR09 Jump Effect
PR10 Fading Effect
PR11 Strobe Effect
PR12 Combined Effects
8 SP-- Built-in program speed setting: SP01-16
9 AU-- Auto/Audi: Auto/Voice control
 FAN-
(*)
FAN0: Fan works only when LED temperature is above 40°C
FAN1: Silent mode
FAN2: Fan always working
11 dp-- dp0/1: 30s instant blackout and light on
12 CH-- CH6/CH2 Model selection
(*) Read “6.3. Fan Noise & LED Temperature Control” on page 13 for further details.

1313
SCENIC W504 User Manual
Eng
6.1. Set DMX Address
When selecting a starting DMX address, always consider the number of DMX chan-
nels. If you choose a starting address that is too high, you could restrict the access
to some of the product’s channels. Scenic W504 uses 6 DMX channels or 2 DMX
channel (according to the DMX mode chosen), which defines the highest configu-
rable address to 505 or 511 to have all channels controllable. Set the Scenic W504
starting address in the 001 - 505 DMX range to enable control of up to 85 products
in the 6-channel control mode. Set the Scenic W504 starting address in the 001 - 511
DMX range to enable control of up to 256 products in the 2-channel control mode.
To choose between 6 or 2 channel operation, press MENU till you reach “CH--”
page and press ENTER; you then see current CH6 or CH2 current mode. Press UP or
DOWN to select desired value. Then press ENTER to confirm, and press MENU to
return to menu main page. To change DMX address, press MENU till you reach “d---”
page and press ENTER; you then see current DMX channel. Press UP or DOWN to
select desired value according to previous instructions. Then press ENTER to con-
firm, and press MENU to return to menu main page.
6.2. DMX Channel Assignments and Values
When use DMX control , the system takes 6 or 2 channels (depending on selected
DMX mode. Below you can see the channel assignments for both modes.
1) 6-ch DMX512 Channel Chart
CHANNEL FUNCTION DESCRIPTION
Channel 1 Total Dimming 0-255: Total dimming linear dimming , from Dark to Bright
Channel 2 Pure White 1 0-255: Pure White 1 linear dimming, from Dark to Bright
Channel 3 Warm White 1 0-255: Warm White 1 linear dimming, from Dark to Bright
Channel 4 Pure White 2 0-255: Pure White 2 linear dimming, from Dark to Bright
Channel 5 Warm White 2 0-255: Warm White 2 linear dimming, from Dark to Bright
Channel 6 Strobe 0: N/C
1-84: Lightning Strobo 85-169: Random Strobo 170-255: Standard Strobo
2) 2-ch DMX512 Channel Chart
CHANNEL FUNCTION DESCRIPTION
Channel 1 Pure White 0-255: Pure White linear dimming, from Dark to Bright
Channel 2 Warm White 0-255: Warm White linear dimming, from Dark to Bright
6.3. Fan Noise & LED Temperature Control
SCENIC W504 is equipped with a digital processor that controls fan speed and LED
temperature. Users can choose among 3 operative modes from FAN0 to FAN2 as
explained in “6 - Menu Operation” on page 12.

1414
SCENIC W504 User Manual
Eng
Users can select the desired mode by pressing MENU button until they reach the
“FAN-” page. Press ENTER; you see the current value. Then press UP or DOWN to
choose from FAN0 to FAN2. Press ENTER to confirm and MENU to go back to the
selection of menu pages.
FAN0 keeps the fan off when LED temperature is below 40°C (104°F). It comes into
operation form 41°C (105°F ca.), and the DSP increases fan speed according to LED
board temperature. Heat protection limit is fixed at 90°C; in normal conditions, this
limit is never exceeded, as fan would act to cool the chip. Maximum noise @ 1m
(max. fan speed) is 43dBA ca.
FAN1 (Silent Mode) always switches the fan off. Internal DSP controls the LED tem-
perature and adjusts its brightness to keep the chip always cooled. Brightness re-
duction starts from 41°C (0% reduction) to 87°C (45% reduction). Fan noise is 0dBA.
FAN2 preset keeps the fan always working, so the LED board temperature will al-
ways be kept cooled. Fan noise @ 1m is 43dBA ca.
6.4.Master/Slave Mode
In case you need to control more SCENIC W504 simultaneously (all fixtures operate
exactly the same way) without the use of a DMX controller, you can use the Master/
Slave function. There is no specific function to be activated on the display; simply
the master unit must be connected first, all the others in daisy-chain through the
DMX IN-OUT connections. All units (master and slaves) should be in DMX Channel
001 only, and have same Channel Mode (all 6CH or 2CH).
7 - TroubleshooTing
Problem Probable Cause(s) Remedy
No response from fixture
when power is applies No power to fixture Check power cables
Check mains plug
Fixture does not reset
correctly Electronic failure Contact service technician*
No light, LED cuts out
intermittently, or burns out
too quickly
LED missing or blown Disconnect fixture and replace
the LED
Fixture or LED is too hot Allow fixture to cool. If prob- lem persists, contact service
technician*
Fixture resets but does
not respond correctly to
controller (DMX mode
operation)
Controller not connected Connect controller
Incorrect addressing of the
fixtures Check address setting on fixture and controller
Bad data link connection Inspect cables and correct poor connections and/or broken
cables.

1515
SCENIC W504 User Manual
Eng
Fixture resets but does
not respond correctly to
controller (DMX mode
operation)
Conflict between tracking
and vector control Eliminate scene cross-fade on controller
Data link not terminated Insert termination plug in output
of last fixture**
Defective fixture on 2 devices
transmitting on link
Bypass fixtures one at a time
until normal operation is
regained: unplug both connec-
tors and connect them directly
together
* To contact CentoLight service, see “9 - Warranty And Service” on page 16 or visit www.centolight.com
** For instruction on how to install a DMX terminator, see “5.4. DMX Terminator” on page 11.
8 - sPeCifiCaTion
Light Source 4 x 50W LED
Color System 2x Warm White @ 3200°K + 2x Pure White @ 5600°K
LED Control Flicker-free
Optical System 25° lens
Luminance 109000 Lux @ 1m; 27000 @ 2m (all LEDs combined)
Light Source Life-Cycle > 50.000 h
Dimmer 0-100% linear dimming with Sinusoidal Smooth Subdivision
Technology
DMX Control Mode DMX512 6CH/2CH with RDM
Operating Modes Master/Slave, Sound Active, Manual
Strobe 0-20Hz
Cooling System All-Direction Ventilating System with DSP control (fan is stopped when LED board temperature is under 40°C; it runs
when it is over)
Fan Noise 0dB (temp under 40°C); 43.0 dBA @ 0.5m (temp. above 41°C);
46.1 dBA close to fixture
IP Rate IP20
Working Temperature Room Temperature between -20°C and 50°C (-4°F to 122°F)
Housing Aluminum with fine sand wear-resistant spray paint
Operating Voltage 110V-240V / 50-60Hz
Power Consumption 220W max.
Fixture Size (LxD) Min. Ø228 x 138.5 mm (Ø8.98 x 5.45 in); Max. - bracket includ-
ed - Ø282 x 253 mm (Ø11.10 x 9.96 in)
Fixture Weight 2,9 kg (6.39 lbs.)
Carton Size (LxHxD) 290 x 290 x 290 mm (11.42 x 11.42 x 11.42 in)
Carton Weight 3,7 kg (8.16 lbs.)
Note: Our products are subject to a process of continual further development. Therefore modifications to
the technical features remain subject to change without further notice.

1616
SCENIC W504 User Manual
Eng
9 - WarranTy and serviCe
All CENTOLIGHT products feature a limited two-year warranty. This two-year
warranty starts from the date of purchase, as shown on your purchase receipt. The
following cases/components are not covered by this warranty:
yAny accessories supplied with the product
yImproper use
yFault due to wear and tear
yAny modification of the product effected by the user or a third party
CENTOLIGHT shall satisfy the warranty obligations by remedying any material or
manufacturing faults free of charge at CENTOLIGHT’s discretion either by repairing
or exchanging individual parts or the entire appliance. Any defective parts removed
from a product during the course of a warranty claim shall become the property of
CENTOLIGHT.
While under warranty, defective products may be returned to your local CENTOLI-
GHT dealer together with the original proof of purchase. To avoid any damages in
transit, please use the original packaging if available. Alternatively, you can send
the product to CENTOLIGHT SERVICE CENTER – Via Enzo Ferrari, 10 – 62017 Porto
Recanati - Italy. In order to send a product to service center, you need an RMA num-
ber. Shipping charges have to be covered by the owner of the product.
For further information please visit www.centolight.com
10 - Warning
PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only
This symbol indicates that this product is not to be disposed of with your
household waste, according to the WEEE Directive (2012/19/UE) and your
national law.
This product should be handed over to a designated collection point, e.g.,
on an authorized one-for-one basis when you buy a new similar product or to an
authorized collection site for recycling waste electrical and electronic equipment
(WEEE).
Improper handling of this type of waste could have a possible negative impact on
the environment and human health due to potentially hazardous substances that
are generally associated with EEE. At the same time, your cooperation in the correct
disposal of this product will contribute to the effective usage of natural resources.
For more information about where you can drop off your waste equipment for recy-
cling, please contact your local city office, waste authority, approved WEEE scheme
or your household waste disposal service.

1717
Manuale Utente SCENIC W504
Ita
soMMario
1 - Prima Di Iniziare 18
1.1. Cosa è Incluso - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
1.2. Istruzioni per il Disimballaggio - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
1.3. Accessori- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
1.4. Limiti di Responsabilità - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
2 - Istruzioni di Sicurezza 19
2.1. Significato dei simboli - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
3 - Montaggio e Appendimento 20
3.1. Installazione Sospesa - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
3.2. Acqua / umidità - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
3.3. Calore - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
3.4. Manutenzione - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
4 - Introduzione 21
4.1. Caratteristiche - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
4.2. Dimensioni del Prodotto e Panoramica- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
5 - Setup del prodotto 23
5.1. Descrizione del pannello posteriore- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23
5.2. Connessioni di Rete- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
5.3. Connessioni DMX - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
5.4. Terminatore DMX - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
5.5. Cavi DMX 3-Poli/5-Poli- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
6 - Funzionamento dei Menu 26
6.1. Impostazione dell’indirizzo DMX.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
6.2. Assegnazioni e valori dei canali DMX - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
6.3. Controllo della ventola e della temperatura del LED- - - - - - - - - - - - - - - - - - - - - - - - - 27
6.4. Modalità Master/Slave - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
7 - Risoluzione dei Problemi 28
8 - Speciche Tecniche 29
9 - Garanzia e Assistenza 30
10 - Avviso UE e SEE (Norvegia, Islanda, Liechtenstein) 30

1818
Manuale Utente SCENIC W504
Ita
1 - PriMa diiniziare
Grazie per aver acquistato il faro SCENIC W504. Prima di iniziare, assicuratevi di
leggere attentamente questo manuale! Esso utente è stato creato per fornire sia
una panoramica dei controlli, sia informazioni su come usarli.
1.1. Cosa è Incluso
La confezione include:
y1x faro CENTOLIGHT SCENIC W504
y1X Cavo di Rete da 1m (40in c.) Powercon-Europlug
y1x Cavo da 2m (79in ca.) DMX XLR 3pin Maschio - XLR 3-pin Femmina
yQuesto Manuale d’uso
ATTENZIONE: La confezione non è un giocattolo! Tenere fuori dalla portata dei
bambini! Conservare in un luogo sicuro il materiale di imballaggio originale.
1.2. Istruzioni per il Disimballaggio
Tirare fuori dall’imballo il prodotto con attenzione e controllare il cartone per assi-
curarsi che tutte le parti siano nella confezione e siano in buone condizioni.
Se la confezione o il contenuto (il prodotto e gli accessori inclusi) risultano danneg-
giati dalla spedizione o mostrano segni di maltrattamento, avvisare immediata-
mente il vettore o il rivenditore. Inoltre, conservare la scatola e il contenuto per una
eventuale ispezione.
Se l’apparecchiatura dovesse essere restituita al produttore, è importante che
venga riportata o spedita nell’imballo originale del produttore. Si prega di non
intraprendere alcuna azione senza prima contattare il proprio rivenditore o aver
contattato il nostro servizio di assistenza post-vendita (visitare www.centolight.com
per i dettagli).
1.3. Accessori
CENTOLIGHT fornisce un’ampia gamma di accessori di qualità che è possibile utiliz-
zare con le apparecchiature della serie SCENIC, come cavi, splitter, controller DMX,
materiali di consumo e un’ampia gamma di altri fari.
Tutti i prodotti nel nostro catalogo sono stati testati a lungo con questo dispositivo,
quindi ti consigliamo di utilizzare accessori e ricambi originali CENTOLIGHT.
Chiedete al vostro rivenditore CENTOLIGHT o visitate il nostro sito web www.centoli-
ght.com per eventuali accessori di cui potreste aver bisogno per garantire le migliori
prestazioni al vostro prodotto.

1919
Manuale Utente SCENIC W504
Ita
1.4. Limiti di Responsabilità
Le informazioni e le specifiche contenute in questo manuale utente sono soggette
a modifiche senza preavviso. CENTOLIGHT non si assume alcuna responsabilità per
eventuali errori od omissioni e si riserva il diritto di rivedere o creare questo manua-
le in qualsiasi momento.
Copyright© 2021 CENTOLIGHT. Tutti i diritti riservati.
2 - isTruzioni di siCurezza
yLeggete queste istruzioni
yConservate queste istruzioni
yPrestate attenzione a tutti gli avvertimenti
ySeguite tutte le istruzioni
2.1. Signicato dei simboli
Questo simbolo viene utilizzato per indicare che all’interno di
questo apparecchio sono presenti terminali sotto tensione,
anche in condizioni operative normali, che possono essere suffi-
cienti a costituire il rischio di scosse elettriche o morte.
Questo simbolo è usato per descrivere importanti problemi di
installazione o configurazione. Il mancato rispetto dei consigli e
delle informazioni su come evitare tali problemi può portare al
malfunzionamento del prodotto.
Questo simbolo indica un terminale di messa a terra.
ATTENZIONE Descrive precauzioni da osservare per prevenire lesioni o morte
dell’operatore.
Per proteggere l’ambiente, cercare di riciclare il più possibile il
materiale di imballaggio e i materiali di consumo esauriti
Questo simbolo indica che il dispositivo può essere usato solo
all’interno. Tenere asciutto il faro e non esporre a pioggia e
umidità
Non gettare questo prodotto come spazzatura generica, con-
ferire il prodotto seguendo le normative sui rifiuti elettronici in
vigore nel vostro paese.

2020
Manuale Utente SCENIC W504
Ita
3 - MonTaggio eaPPendiMenTo
Prestare attenzione alla sicurezza! Si prega di fare sempre riferimento alla
direttiva EN 60598-2-17 e agli standard nazionali in fase di installazione. Solo
personale autorizzato può eseguire l’installazione.
3.1. Installazione Sospesa
yL’installazione del dispositivo deve essere progettata e costruita in un modo che
possa sopportare 10 volte il peso per 1 ora, senza alcun cedimento o danneg-
giamento della struttura. L’installazione deve essere sempre protetta con un
dispositivo di sicurezza secondario, ad esempio un cavo di sicurezza. Questo di-
spositivo deve essere realizzato in un modo tale che nessuna parte del prodotto
possa cadere se il fissaggio principale cedesse.
yDurante le operazioni di montaggio, smontaggio o manutenzione del faro è
vietato consentire lo stazionamento o anche solo il passaggio nell’area sotto-
stante l’installazione. L’operatore deve assicurarsi che l’installazione e i sistemi
di sicurezza siano approvati da un esperto prima di avviare per la prima volta il
funzionamento dopo aver apportato qualsiasi modifica. Deve inoltre assicurarsi
che un esperto approvi nuovamente l’installazione e i dispositivi di sicurezza
ogni anno.
IMPORTANTE: il montaggio su strutture sospese richiede un’esperienza specica;
tra cui (ma non soltanto) il calcolo dei limiti di carico di lavoro, la scelta del
materiale di installazione e l’ispezione periodica del proiettore e dei dispositivi
di sicurezza. Se non si dispone di tali qualiche, è bene non procedere con l’in-
stallazione da soli, ma si consiglia di rivolgersi a professionisti specializzati.
L’installazione impropria può provocare lesioni personali anche molto gravi.
ySe il faro deve essere alzato verso/o abbassato dal soffitto o da travi sospese,
è consigliabile usare sistemi di tralicci professionali. L’apparecchio non deve mai
essere lasciato oscillare liberamente.
ATTENZIONE: utilizzare i morsetti appropriati per montare l’apparecchio sul
traliccio. Assicurarsi che il dispositivo sia ssato correttamente e che il traliccio
stesso sia sicuro.
3.2. Acqua / umidità
yIl prodotto è per uso interno. Al fine di prevenire il rischio di incendio o scosse
elettriche, non esporre a pioggia o umidità
yL’unità non può essere utilizzata vicino all’acqua; ad esempio vicino a una vasca
da bagno, un lavello da cucina, una piscina, ecc.