CENTR BW1.1 User manual

Record Serial Number Here
V07212023
MADE IN CHINA
USER MANUAL
CENTR BODY WEIGHT
HOME GYM MACHINE
Model: BW1.1

WELCOME
Welcome to Centr and thanks for your purchase. We're happy to have you. Please inspect your product and
contact us right away if anything is missing or damaged.
Your equipment also comes with access to Centr's digital membership, unlocking tools that will fuel your
active lifestyle and well-being. The Centr wellness system aligns your movement, meals and mind with
expert-led programs and advice made to work together to deliver you the best results and lifelong healthy
habits. Get moving with limitless ways to fuel your routine and reach your goals!
NEED HELP? WE’RE HERE FOR YOU.
US CUSTOMERS
If you have questions or issues with your equipment, please contact our US Customer Service team.
Support is provided in English and Spanish.
GLOBAL CUSTOMERS (OUTSIDE OF US)
If you have any questions or issues with your equipment, please contact the store where your
purchase was made.
*Support is provided in English and Spanish*
EMAIL
[e-mail]
PHONE
877-738-1729 (US Only)
[phone] (Global)
Mon-Fri 8am-5pm PT - UTC-7h/8
C H AT
www.inspirefitness.com
PRODUCT WARRANTY
To view full warranty details, or to register your product for warranty, visit centr.com/support
AUSTRALIA
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with
the service, you are entitled:
•to cancel your service contract with us; and
•to a refund for the unused portion, or to compensation for its reduced value.
You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does
not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a
refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be
compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.

IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions apply whenever you
operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate
your machine. Please note the following safety precautions:
1. Consult a physician prior to commencing an exercise program.
2. Always keep children and pets away from the machine. DO NOT leave children unattended in the same
room with the machine. The cabling and moving parts on this machine can cause serious injury or
death if used improperly.
3. Only one person at a time should use the machine.
4. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the
workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
5. Position the machine on a clear, leveled surface. DO NOT use the machine near water or outdoors.
6. Keep hands away from all moving parts.
7. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other loose clothing
that could become caught in the machine. Running or training shoes are also required when using the
machine.
8. Use the machine only for its intended use as described in this manual. DO NOT use attachments not
recommended by the manufacturer.
9. Do not place any sharp objects around the machine.
10. Disabled persons should not use the machine without a qualified person or physician in attendance.
11. Before using the machine to exercise, always do stretching exercises to properly warm up.
12. Never operate the machine if the machine is not functioning properly.
13. The Centr 1 Home Gym is designed for home use only. Therefore, it does not have a weight stack cover.
This means the following for the user:
•Only one person may use the Centr 1 Home Gym at the same time.
•The person must also ensure that no other person is in the exercise area of the Centr 1 Home Gym.
Persons who are in the room at the same time as the trainee must maintain a distance of at least
5 ft / 1.5 meters from the exercise equipment.
•After using the device, it must be secured in such a way that no unauthorized person has access to it.
CARE AND MAINTENANCE
•Inspect and tighten all parts before using the machine.
•The Frame and Seat Pad of the machine can be cleaned using a damp cloth and mild non-abrasive
detergent. DO NOT use solvents.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR
INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING
ANY FITNESS EQUIPMENT. Health In Motion, LLC. DOES NOT ASSUME ANY RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

MAINTENANCE
WARNING
DO NOT place styrofoam or printed materials on the seat pads. Over time, these may stick to the pads and
mar the surface.
DO NOT leave items sitting on the seat pads, these pads have a special density that takes shape to
objects and small objectswill leave imprints in the surface that may take time to come out.
•Periodically inspect the cables for splitting, cracking or fraying. Also watch for bulging or at areas in the cable.
•Immediately replace cables at the rst signs of damage or wear. Never use equipment with damaged or worn cables.
•Cables naturally stretch over time, so check cable slack periodically and adjust cable tension as needed.
• Regularly inspect product for loose hardware.
•Do not use or store equipment outdoors.
•Inspect snap links, swivels, handles and weight stack pin for wear or damage. If wear or damage exists,
replace with Inspire Fitness parts only.
• Locate and familiarize yourself with all warning decals on the Home Gym.
• Replace damaged or worn upholstery immediately.
•Periodically wipe down guide rods with a dry cloth and re-apply a thin coat of a Teon™ based lubricant.

ASSEMBLY INSTRUCTIONS
PAGE 3

STEP 1
Attach Front Foot Assembly (#1) to Base Frame Assembly (#2) using: Two (M10x70 Bolts)
Attach Rear Foot Assembly (#3) to Base Frame Assembly (#2) using: Two (M10x70 Bolts)
Wrench tighten all bolts now.
Page 4 5/11

STEP 2
Attach Slider Assembly (#7) to Weight Selector Tube(#6).
Install M5x10 Screw (#106) into Weight Selector Stem (#6) and tighten.
Insert two Step Bushings (#40) into the Weight Selector Tube (#6).
Attach two 3 ½” Pulleys (#37) and two 1” long Barrel Spacers (#51)
to Weight Selector Tube (#6) using:
Two (M10x70 Bolts)
Wrench Tighten Bolts Now.
Page 5 12/11

STEP 3
Attach Weight Selector Tube (#6) to Base Frame Assembly (#2) using:
One(M12x90 Bolt)
Wrench tighten bolt so there is a slight drag when moving Weight Selector
Tube. Do not over tighten.
Page 6 12/11

STEP 4
Attach Lower Arms (#8) to Base Frame Assembly (#2) using: One (M16x230 Hex Bolt)
Attach Upper Arms (#9) to Base Frame Assembly (#2) using: One (M16x230 Hex Bolt)
Wrench Tighten bolts so there is a slight drag on the Arms when moved.
Do not over tighten.
Page 7 12/11

STEP 5
Attach Lower Main Frame (#11) to Foot Plate (#65) using: Three (M10x60 Hex Bolt)
Wrench Tighten Now.
Page 8 5/11
11
65

STEP 6
11
8
8
Attach Lower Main Frame (#11) to Lower Arms (#8) using: One (M16x230 Hex Bolt)
Wrench Tighten bolt so there is a slight drag when moving Lower Main Frame.
Do not over tighten .
Page 9 12/11

STEP 7
Attach Upper Main Frame (#10) to Lower Main Frame (#11) using:
Four (M10*90 Allen Head Screws)
Attach Upper Main Frame (#10) to Left & Right Upper Arms (#8 & #9) using:
One (M16*230 Hex Bolt)
Wrench tighten bolts now.
Page 10 5/11
11

STEP 8
Attach Top Beam Plates (#13) and One 3 ½” Pulley (#37) to Upper Main Frame (#10) using:
Four (M10*100 Hex Bolts)
Two (1” Long barrel Spacers)
Finger Tighten Only
Attach Lat Bar Holders (#50) and One 3 ½” Pulley (#37) to Top Beam Plates (#13) Using:
One (M10*115 Hex Bolt)
One (M10*100 Hex Bolt)
One (3” Spacer Tube)
Two (1” Long barrel Spacers)
Finger tighten bolts only. No not wrench tighten until after step 9.
Page 11 12/11
10
Note: Item 13 may look
different from what is
represented.

STEP 9
117
108
108
88
14
10
47
13
Attach Press Arm Mount (#14) to Top Beam Plates (#13) using: One (M12*100 Hex Bolt)
Wrench Tighten bolt #88 so there is a slight drag when moving Press Arm Mount.
Do not over tighten .
Wrench tighten all bolts installed in Step 8.
Attach Pop-Pin Shaft (#47) to Upper Main Frame (#10)
Thread Completely and Wrench Tighten.
Page 12 12/11

STEP 10
18
14
Attach Press Arm (#18) to Press Arm Mount (#14) using: One (M12*160 Hex Bolt)
Wrench Tighten bolt so there is a slight drag when moving Press Arm.
Do not over tighten .
Page 13 12/11

STEP 11
Attach Leg Extension Assembly (#24) to Lower Main Frame (#11) using:
One (M12*80 Hex Bolt)
Wrench Tighten bolt so there is a slight drag when moving Leg Extension Assembly.
Do not over tighten .
Attach Press Arm Mount Cover Plate (#16) using: One (M5*12 Philips head Screw)
Wrench Tighten Now.
Page 14 12/11
14
16
103
117
108
108
89
11
24

STEP 12
98
10
20
45
93
44
99
43
21
44 43
45
Attach Back Pad Tilt Frame (#20) to Upper Main Frame (#10) using:
One Roller Tube (#21) Two M6*8 Set Screws (#98)
Two Foam Rollers (#44) One M6*75 Button Head Screw (#93)
Two Large Plastic Washers (#43) One M6 Flat Head Nut (#99)
Two End Caps (#45)
Wrench Tighten bolt #93 so there is a slight drag when moving Back Pad tilt Frame.
Do not over tighten .
Note: Tighten the two set screws(#98) completely after Foam Rollers are installed.
Page 15 12/11
Note: Item 20 may look
different from what is
represented.

STEP 13
Attach Seat Pad (#53) to Seat Stem (#23) using: Two (M10*40 Hex Bolts)
Wrench Tighten Now.
Slide Seat Stem (#23) into Lower Main Frame (#11)
Attach the Lower (#124) and Upper (#125) Back Pads to Back Pad Tilt Frame (#20) using: Two
(M10*15 Flat Head Screws) Wrench Tighten Now.
Page 16 5/11

STEP 14
Attach 4 Foam Rollers (#44) to Leg Extension Assembly (#24) & Seat Stem (#23) using:
Two Roller Tubes (#21)
Four End Caps (#45)
Page 17 12/11
45
44
45
21
44
21
24
44
45
44
45
Note: Image may not
represent the most
recent look of the
product.