Central Brass 0046-A User manual

MODEL NO. 0046-A
SINK FIXTURE
Brecskville, Ohio 44141
Phone: [phone] Fax: [phone]
www.CentralBrass.com
06-20-2008
Central Brass
C O M P A N Y
Installation Drawing
The sink faucet body is a solid brass casting designed
for ledge mounting. The body is polished and copper,
nickel, and chrome plated. The inlet supply connec-
tions are xed at 8-inch centers. The inlets are 1-1/2
inch NPS female pipe connections. The stems are
all brass with a double O-Ring seal and rubber seat
washer. The canopy handles are zinc die cast with a
chrome plated nish. The 6-inch swivel spout is brass
with a chrome plated nish and is tted with a water
saving aerator that limits the ow rate. The O-Rings
and seals are rubber. The soap dish and post are brass
with a chrome plated nish.
Flow Rate: 2.0 GPM @ 60 psi
ADA Compliant and Meets ASME A112.18.1M
ANSI/NSF 61/Section 9 Certied
Certified to
ANSI/NSF 61 Section9
O-Ring Compression 1/4-Turn Compression
0046-A 0046-A-Q

MODEL NO. 0046-A
SINK FIXTURE
Brecskville, Ohio 44141
Phone: [phone] Fax: [phone]
www.CentralBrass.com
06-20-2008
Central Brass
C O M P A N Y
Handle variations available
G-4147 (4-inch)
G-4149 (6-inch)
ELS - Sufx
Wrist 4-inch
EL - Sufx
Elbow 6-inch
Spout variations available
SU-363-MA
14-inch
A1 - Sufx
8-inch Brass Tube Spout
A2 - Sufx
10-inch Brass Tube Spout
A3 - Sufx
12-inch Brass Tube Spout
A4 - Sufx
14-inch Brass Tube Spout
H - Sufx replaces A for hose end
A6 - Sufx
8-inch Brass D-Spout
H - Sufx replaces A for hose end
SU-365-CA
8-inch
(Available in 5-inch)
Cast Brass Spout
Extension
Accessory
SU-2775-R-02
7-inch
A9 - Sufx
5-inch Cast Brass Spout
H - Sufx replaces A for hose end
Faucets with lever, wrist or el-
bow handles with compression
or ceramic stem cartridges are
ADA compliant.
Drinking water products tested and certied by
NSF International to ANSI/NSF Standard 61,
Section 9. Each product required to meet the
standard proudly exhibits the NSF logo.
Sufx Options
& Accessories
SU-2923-A
5-inch
5-1/16"
8.19"
3-61/64"
5"
1/64"
1-3/4"
7"
2-1/2"

MODEL NO. 0046-A
SINK FIXTURE
Brecskville, Ohio 44141
Phone: [phone] Fax: [phone]
www.CentralBrass.com
06-20-2008
Central Brass
C O M P A N Y
Parts Breakdown
The parts listed in the parts breakdown above may not be
offered separately as replacement parts. Please review the
Replacement Parts page for the authorized replacement parts
that are available for this item.
# Part # Description
1 2831-CP Brass Faucet Body
2 263-BC Bronze Seat
3 1028-Y Nylon Gasket
4 104 Brass Seat Washer Screw
5 901-WNN Seat Washer
6 453-FL Brass Left Thread O-Ring Stem
6 453-FR Brass Right Threat O-Ring Stem
7 1038-453 O-Ring
8 453-EWC Brass Left Thread O-Ring Bonnet
8 452-EWH Brass Right Thread O-Ring Bonnet
# Part # Description
9 523-C Handle Indexed “C”
9 523-H Handle Indexed “H”
10 107-F Brass Phillips Head Screw
11 1038-KN O-Ring
12 166-FN Stainless Steel Snap Ring
13 PF-782-D Brass Spout Nut
14 PF-2924 Brass Swivel Spout
15 30-M Female Aerator
16 2821-49 Brass Flange
17 2882-49 Brass Elbow
18 PF-2843-49 Brass Hex Spout Nut
19 PF-256-L Brass Spud
20 940-TRN Washer
21 SU-453-EL Left Thread O-Ring Stem Assembly
21 S-453-ER Right Thread O-Rink Stem Assembly
22 SU-2883 Brass Flange Assembly
23 PF-285-F Brass Soap Dish Pot
24 SU-259-A Brass Soap Dish