Central Brass 0284 Series User manual

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
022803 I-0284
www.CentralBrass.com
Faucets with lever, wrist or elbow
handles and compression or ceramic
stem cartridges are ADA compliant.
Certified to
ANSI/NSF 61 Section9
0284 Series Contemporary-Styled Bar Faucet
Cast Brass
2.2 GPMAerator
GooseneckSpout
Compression Stems with
ReplaceableSeats
Bar Faucet

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
022803 I-0284
www.CentralBrass.com
CENTRAL BRASS
INSTALLATION INSTRUCTIONS
1. Assemble hot & cold supply tubes to faucet body.
Tightentubeswithopenendwrench.
2. Apply a thin coat of plumber's putty on the bottom
edgeofthefaucetbodyandplacethefaucetshankthru
thehole in thesink.
3. Installthe washers andlocknutonthe faucet shank.
Positionthe faucet andtightenthe locknut.
4.The bodyshouldbe positioned withthecold indexed
handleontheright. Theninstallthespout,tightenspout
nutto body(ifnecessary).
5. Connect the supply tubes to the hot (left) and
cold (right) supply lines. Do not kink supply tubes
whenbending toconnectwith supplylines.
6. Turn on supply lines. Check all connections for
leakage. Turnonhotandcoldwaterforoneminute
toflush outdirtand sedimentthatmight haveaccu-
mulatedduringinstallation. Turn offwater and as-
sembleaerator. Checkunder sink connections for
leakage.

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
022803 I-0284
www.CentralBrass.com
1
2
**
A
*
3
4
5
*
B
C
6
7
8
*
D9
E
E
*
*
*
REPLACEMENTPARTS
*These items are not offered
individually and must be
purchased as a group or unit.
Please contact Central Brass
for more information.

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
022803 I-0284
www.CentralBrass.com
 If faucet has round handles (70 or 80 suffixes) , use two Hot stem assemblies
 If faucet has lever handles, use one Hot and one Cold stem assemblies
REPLACEMENTPARTS
# Part # Description
A G-518-C Lever Handle Indexed C
with Screw (X107-H)
A G-518-H Lever Handle Indexed H
with Screw (X107-H)
B G-454-EL Cold ¼ Turn O-Ring Stem Assembly
with Gasket (X1028-Y)
B G-454-ER Hot ¼ Turn O-Ring Stem Assembly
with Gasket (X1028-Y)
C SU-157-JA Rigid Gooseneck Spout
with Aerator (30-M)
D G-284 Locknut & Washer (X52) Group
E SU-767 Supply Tube with O-Ring (1 pc)
1 X107-H Handle Screw (6 pcs per pack)
2 X1038-453 O-Rings (25 pcs per pack)
3 X901-WNN Stem Seat Washer (25 pcs per pack)
4 X104 Seat Washer Screw (25 pcs per pack)
5 X1028-Y Gasket (25 pcs per pack)
6 X263-BC Replacement Seat (10 pcs per pack)
7 30-M Aerator
8 XPF-166-U Spout End Adapter (2 pcs per pack)
9 X52 Washer (10 pcs per pack)

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
022803 I-0284
www.CentralBrass.com
CENTRALBRASS
MAINTENANCEINSTRUCTIONS
4
DISASSEMBLY REPLACEMENT
1
2
3
REMOVE STEM ASSEMBLY
1.Turnoffwater supply.
2.Removescrew.
3.Removehandle.
REMOVE HANDLE
REMOVESEAT
(For compression stems only)
1. Use adjustable
wrench.
2. Unscrew (counter-
clockwise) remove
stem unit.
Use Only Genuine
Central Replacement Parts
COMPRESSION
1. Insert 5/16" allen
wrench in seat.
2. Turn seat (counter-
clockwise) to remove.
 If faucet has round handles (70 or 80 suffixes) , use two Hot stem assemblies
 If faucet has lever handles, use one Hot and one Cold stem assemblies
Compression Units
G-354-ER Hot stem assembly 1/4 turn with gasket
G-354-EL Cold stem assembly 1/4 turn with gasket
X263-BC Replaceable Seat (10 per Pack)
X1028-Y Nylon Gasket (25 per Pack)