Central Brass 0289 Series User manual

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
030103 I-0289
www.CentralBrass.com
Faucets with lever, wrist or elbow
handles and compression or ceramic
stem cartridges are ADA compliant. Certified to
ANSI/NSF 61 Section9
Bar Faucet
Cast Brass
2.2 GPMAerator
Gooseneck Spout
Compression Stems with
Replaceable Seats
0289 Series Double Bar Faucet

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
030103 I-0289
www.CentralBrass.com
CENTRAL BRASS
INSTALLATION INSTRUCTIONS
1. Assemblehot&coldsupply tubes to faucet body.
Tighten tubes with open end wrench.
2. Applyathincoatofplumber'sputtyonthebottom
edgeof the faucet bodyand place the faucet shank
through the hole in the sink.
3. Installthewashersandlocknut onthefaucet shank.
Position the faucet and tighten the locknut.
4.Thebodyshouldbepositionedwiththecoldindexed
handleon the right. Then install thespout,tighten
spout nutto body (if necessary).
5. Connectthe supply tubes to thehot(left)andcold
(right) supply lines. Do not kink supply tubes when
bending to connect with supply lines.
6. Turn on supply lines. Checkall connections for
leakage. Turn on hot and cold water for one
minutetoflushoutdirtand sediment that might
haveaccumulatedduring installation. Turnoff
water and assemble aerator. Check under sink
connections for leakage.

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
030103 I-0289
www.CentralBrass.com
1
2
*
*
A
*
3
4
5
6
B
C
*
7
8
D
9
*
E
*
*
F
F
REPLACEMENT
PARTS
*These items are not offered
individually and must be
purchased as a group or unit.
Please contact Central Brass
for more information.

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
030103 I-0289
www.CentralBrass.com
 If faucet has round handles (70 or 80 suffixes) , use two Hot stem assemblies
 If faucet has lever handles, use one Hot and one Cold stem assemblies
REPLACEMENTPARTS
# Part # Description
A G-523-C Lever Handle Indexed C with Screw (X107-F)
A G-523-H Lever Handle Indexed H with Screw (X107-F)
B G-453-EL Cold O-Ring Stem Assembly with Gasket (X1028-Y)
B G-453-ER Hot O-Ring Stem Assembly with Gasket (X1028-Y)
C K-453-C Cold O-Ring Stem Assembly with Gasket (X1028-Y) and Seat (X263-BC)
C K-453-H Hot O-Ring Stem Assembly with Gasket (X1028-Y) and Seat (X263-BC)
D SU-157-GLA Rigid Gooseneck Spout with Aerator (30-M)
E G-284 Locknut & Washer Group
F SU-767 Supply tubes with O-Ring
1 X107-F Handle Screw (25 pcs per pack)
2 X1038-453 O-Rings (25 pcs per pack)
3 X901-WNN Stem Seat Washer (25 pcs per pack)
4 X104 Seat Washer Screw (25 pcs per pack)
5 X1028-Y Gasket (25 pcs per pack)
6 X263-BC Replacement Seat (10 pcs per pack)
7 30-M Aerator
8 XPF-166-U Spout End Adapter (2 pcs per pack)
9 X52 Washer (10 pcs per pack)

CENTRAL BRASS MFG CO
2950East55thStreet,Cleveland,Ohio44127
Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com
030103 I-0289
www.CentralBrass.com
CENTRALBRASS
MAINTENANCEINSTRUCTIONS
4
DISASSEMBLY REPLACEMENT
1
2
3
REMOVE STEM ASSEMBLY
1.Turnoffwater supply.
2.Removescrew.
3.Removehandle.
REMOVE HANDLE
REMOVESEAT
(For compression stems only)
1. Use adjustable
wrench.
2. Unscrew (counter-
clockwise) remove
stem unit.
Use Only Genuine
Central Replacement Parts
COMPRESSION
1. Insert 5/16" allen
wrench in seat.
2. Turn seat (counter-
clockwise) to remove.
Compression Units
K-453-C Cold stem assembly with seat & gasket
K-453-H Hot stem assembly with seat & gasket
G-453-ER Hot stem assembly with gasket
G-453-EL Cold stem assembly with gasket
X263-BC Replaceable Seat (10 per Pack)
X1028-Y Nylon Gasket (25 per Pack)