Centro Counter User manual

Centro Counter Assembly Instructions

2
Assemble vertical profiles to
the curved profile ensuring
that the graphic fixing strip
is adjacent to the post and
facing forward (convex side).
3
Attach second curved profile
to both posts and both
verticals ensuring the top of
the profile is flush with the
top of the triangular stealth
plates. Tighten clamp screws
to secure in place.
1
Affix first curved profile
flush with bottom of both
8-way posts ensuring the
cut out in both triangular
stealth plates face inwards
(as shown).
Front
(Convex)
Cordless screwdriver shown for illustrative purposes only.

4
Remove counter top from
slip bag and spread bag on
floor. Position counter top
on bag with screw fixing
holes facing upwards.
5
Turn assembled post and
profile assembly over and
align stealth plates with
fixing holes on Counter top.
6
Insert all six fixing screws
supplied and tighten to
secure Counter top.
Cordless screwdriver shown for illustrative purposes only.

8
Turn completed assembly back
onto its base plates and attach
your graphic to convex side of
system, working from one post
to the other.
7
Align base plate to 8-way post
in position shown. Insert 4
off fixing screws and fasten.
Repeat for second base plate.
Cordless screwdriver shown for illustrative purposes only.