Cete Automotive Air Suspensiom User manual
Manual
Air Suspensiom
Active Suspension Control
Content
1. Disclaimer 1
2. Copyright 1
3. Safety Instructions 1
4. General Informations 1
5. Introduction 2
6. Connecting via WiFi 2
7. Usage of the App 3
8. Prole 3
9. Lowering 4
10. Saving Settings 4
11. Further informations 5
12. Switching View 5
13. „SETTINGS“ 6
14. Password 6
15. „PROFILE NAME“ 7
16. „SHOW MODE“ 7
17. „SPEEDLIMIT“ 8
18. „SELECT CAR...“ 8
19. „WIFI AUTIMATIC“ 9
20. Hard- and Software Informations 9
1. Disclaimer
The content listed in this manual is created with greatest possible care. The Cete Automotive GmbH assu-
mes no responsibility for the completeness, topicality and accuracy for the listed content. The use of con-
tent takes place at the user‘s own risk. Therefore we - the Cete Automotive GmbH - assume no liability and
responsibility for damages and defects, which arise from operation or incorrect handling and maintenance.
2. Copyright
The published contents, works and informations in this manual are subject to the German copyright law.
Any form of reproduction, processing/editing, distribution, copying, editing, translation, storage and any kind
of use outside the limits of copyright law require the written approval of the particular. Unauthorized copying/
saving of the provided informations in this manual are illegal and criminal.
3. Safety Instructions
The installation can only be fulllled by trained specialists. The installation has to be done while the car‘s
battery is unplugged. The Cete Automotive GmbH does not take responsibility for damages, caused through:
• inproper installation
• the usage of unsuitable connectors
• installations in not mentioned car models
The producer reserves the right to change components without giving reasons Errors and omissions excep-
ted
4. General Informations
We ask you to read this manual thoroughly and completely and uphold to the given instructions. During
the development we focused on safety, ease of use, design, innovative development, etc, to guarantee a
high qualtiy product for the consumer. Despite the greatest care improper installation and using or incorrect
operation can result in material damages. Depending on the product and it‘s purpose it may be necessary
to check the legal requirements of the country before commissioning. To receive consideration for warran-
ty claims the product hast to be send back with it‘s original package, the proof of purchase and an error
description. Please note the returns policies. The warranty regulations apply. The warrenty claim and the
operating permit expires through: unauthorized modication of the product, own repairings, violent impacts,
improper use, opening the case.
Manual
5. Introduction
Thank you for purchasing the Active
Suspension Control. Hereafter we will give you an
understanding for the functions and operation of the
Active Suspension Control.
You have the opportunity to establish a
connection between the original air sus-
pension and one of your mobile devices.
The usage of your mobile device serves solely to
congurate the Active Suspension Control and it‘s
not necessary for changing the proles later.
6. Connecting via WiFi
The rst step is downloading the App from the Apps-
tore.
If it‘s installed, the connection between your
mobile device and your Active Suspension Control
has to be established via WiFi.
Therefore you‘ve to open the WiFi settings of your
mobile device and connect this to your installed Ac-
tive Suspension Control. Make sure, that there is a
connection between both devices.
8. Prole
In the upper section of the app you can see the
current Prole. This name can be adapted after-
wards. For this purpose you get more informations
later.
We recommend you to assign the
corresponding name to every driving prole
Every driving programm represent its own driving
prole (e.g. it‘s controlled via the Drive Select
Program of Audi)
The App works synchronously to your vehicle and
shows the current selected driving prole.
Manual
7. Usage of the App
After the App has started you see the Active
Suspension Controle mask, where you can directly
adjust your air suspension.
With the help of several settings you have the
possibility to inuence the handling and the height
of your vehicle.
10. Saving Settings
If you are satised with your choosen settings
press „SAVE SETTINGS“ afterwards.
If you want to reject your choosen settings, you‘ve
to change the driving program (in your vehicle!).
Thereby the Active Suspension Control recovers the
previous saved settings.
Manual
9. Lowering
Use the sliders for adjusting the air suspension to
suit your requirements.
The left slider adjusts the front axle, the right one
the rear axle.
Values in positive range will be plotted with blue co-
lor, values in negative range (lowering) will be plot-
ted with green color.
The car shown in the Middle can be choosen in the
settings.
By adjusting the values the car will be animated
equally.
12. Switching View
To see the other window, just click on „SETTINGS“
in the lower section of the app.
Manual
11. Further informations
The WiFi network is congured to be disabled after
5 minutes.
There are two possibilities to reactive the WiFi Net-
work:
a) Restart your car
b) change the current car prole of your car
For making the exactly height adjustment visible,
you‘ve to change from the current driving prole
to anotherone and back again. For example change
from the „Dynamic“ mode to the „Auto“ mode and
back ‚again.
14. Password
In the password eld you have the possibility to
dene a password for the usage of the app.
This will prevent that third parties change your
settings.
The initial password is 0000. Your new password
has to be made of four numbers. You can‘t use
letters or special characters in it
Please note your new password, because if it‘s
setted once, it can‘t be resetted.
Manual
13. „SETTINGS“
After clicking on „SETTINGS“ you have some more
conguration options.
16. „SHOW MODE“
In this part you can set your preferred values for a
really low suspension.
When you click on the button „SHOW MODE“ it will
be activated.
The Show Mode will be deactivated automatically
after engine restart. Also it will be deactivated
when the driving prole will be changed.
It is recommended not to drive in the „SHOW MODE“.
Manual
15. „PROFILE NAME“
In this eld the current prole is shown. Here you
can dene a preferred name for the current driving
programm (e.g. „Dynamic“).
18. „SELECT CAR...“
By clicking on the drop-down menu you‘ve the
possibility to choose a vehicle for the Suspension
mask.
The selected car will be shown as a graphic in the
main screen.
Manual
17. „SPEEDLIMIT“
Delivered is your Active Suspension Control with a
speedlimit of 120 km/h (75 mph). This means, that
your car will be raised to the original height of
your current driving prole. If you fall below your
selected speed, an internal buffer will be activated.
If you are well under this buffer level, the car will
change the height back to the saved settings.
For the case that you want to stay at the adjusted
level without removal, just set the value to 250 km/h.
If you have selected this speedlimit your
desired settings will be maintained.
20. Hard- and Software Informations
In the lower section you will see some more
informations, which could be needed by the
support team for investigations.
We wish you always a good journey with your
Active Suspension Control.
If there are questions or problems feel free to
contact our support team.
Manual
19. „WIFI AUTIMATIC“
With the „WIFI AUTOMATIC“ button you have the
possibility to automatically activate the WiFi hotspot
of your Active Suspension Control by starting the
engine. Otherwise the hotspot will just be activated
by changing the proles.
Table of contents
Other Cete Automotive Automobile Accessories manuals
Popular Automobile Accessories manuals by other brands
walser
walser TRANSPORTER PLUS Mounting instruction
RaceChip
RaceChip Pro 2 installation guide
FILTRON
FILTRON K 1227-2x Installation instruction
Crux
Crux BTI-ISO manual
Davis Instruments
Davis Instruments DriveRight 600E Installation and user's guide... Installation and user guide
Thule
Thule Rapid System 1854 instructions
