Chamberlain CSW200UL8 User manual

Top View of Typical
Standard Installation
Mounting Holes
Distance between
posts are critical!
Cement posts in place. Depth
of posts determined by soil
conditions and local codes.
Plate MUST be Level!
Front Front Front
Plate MUST be Level!
Cement posts in place. Depth
of posts determined by soil
conditions and local codes.
Note: Refer to the instruction
manual for different installation
setups. Dimensions will vary.
Hinge
Center
35.5"
29.5"
16 ½" 16 ½"
22 ¼"
19 ¼" 19 ¼" 2"
15 ¾"
22" 22"
46"
11"
Front
4" Square Posts welded on Inside3" Posts mounted on Inside3" Posts mounted on Outside
Type 1 Type 2 Type 3
Power and control
wiring should be run
in separate conduits.
3" O.D. Heavy Walled Posts and U-Bolts
Not Provided 4" O.D. Heavy Walled
Square Posts
Not Provided
Power and control
wiring should be run
in separate conduits.
Mounting Holes
Top View of Type 1 Top View of Type 2 Top View of Type 3
Side View of Type 3
Mounting Holes
Mounting Holes
Mounting Holes
Mounting Holes
Mounting Holes
Weld Completely
around posts
Keep the posts
close to the
plate edge.
Center posts
between
mounting holes.
CSW200UL™ Series Mounting Plate
Model #MPEL

Gate
UL Rollers
Top View of Typical
Installation
Distance between
posts are critical!
Cement posts in place. Depth
of posts determined by soil
conditions and local codes.
Plate MUST be Level!
Front
Front
Front
Front
Plate MUST be Level!
Cement posts in place. Depth
of posts determined by soil
conditions and local codes.
18 ½"
25"
19 ¼"
2"
13 ¾"
13 ¾"
19 ¼"
22" 22"
Front
4" Square Posts welded on Inside3" Posts mounted on Inside3" Posts mounted on Outside
Type 1 Type 2 Type 3
Power and control
wiring should be run
in separate conduits.
3" O.D. Heavy Walled Posts and U-Bolts
Not Provided
Power and control
wiring should be run
in separate conduits.
Mounting Holes
Top View of Type 1
Top View of Type 2
Top View of Type 3
Side View of Type 3
Mounting Holes
Conduit Holes
Mounting Holes
Mounting Holes
Conduit Holes Conduit Holes
Mounting Holes
Mounting Holes
SL3000UL™ Series Mounting Plate
Model #MPEL
© 2004, The Chamberlain Group, Inc.
All Rights Reserved
01-51150B
For Technical Support
and Ordering Parts:
1-800-528-2806
4" O.D. Heavy Walled Square Posts
Not Provided
Keep the posts
close to the
plate edge.
Weld
Completely
around posts
Center posts
between
mounting holes.