Champion I DH200 User manual

(1M) 7/05 Printed in U.S.A.
CH910-I
Door-type
High Temperature
Dishwashing Machine
I DH200
STANDARD FEATURES
• Field convertible to corner model
• Top mounted controls
• 1 Hp pump motor water proof
• Door safety switch
• Easy lift door system
• Interchangeable upper and lower spray arms
• Common utility connections
• Two dish racks
• Self-draining pump
• 40°F/22°C final rinse booster (single phase
and three phase available)
• Front mounted scrap screen and
waste collector
• Front mounted wash and rinse
temperature gauge
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115 USA
Tel: [phone] Fax: [phone]
www.championindustries.com
SPECIFIER STATEMENT
Specified unit will be Champion model I DH200 high
temperature door-type dishwashing machine.
Constructed of Type 304 stainless steel. Features
1 Hp pump motor water proof, top mounted controls,
easy lift door system, common utility connections
and interchangeable upper and lower spray arms.
I DH200 DOOR-TYPE
Project
Item No.
Quantity
OPTIONS & ACCESSORIES
70°F/39°C built-in rise stainless steel
electric booster (3 phase only)
Detergent pump and rinse pump

6"
Minimum
Clearance
4"
Minimum
Clearance
Door-type
High Temperature
Dishwashing Machine
I DH200
I DH200 DOOR-TYPE
Dimensions shown in
inches and [millimeters]
Utilities
1Electrical 220/50/3, 220/60/1,
220/60/3 36.0 Machine Load Amps
2Hot Water 3/4" NPT 140°F/60°C
hot water connection
3Drain 1-7/8" [48] connection.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 USA • 800/532-8591 • Fax: [phone] • www.championindustries.com
SPECIFICATIONS
Capacities
Racks per hour 37
Motor horsepower 1 Hp
Water consumption
Gal. per rack US gal.
(liters) 1.7 (6.4)
Temperatures °F/°C
Wash 150/66
Rinse 180/82
Time cycle in seconds
Wash 55
Dwell 12
Rinse 23
Total cycle 90
Warning: Plumbing and electrical connection
should be made by qualified personnel who will
observe all the applicable plumbing, sanitary
and safety codes.
1-1/4" [32]
1-1/8" [29]
2-1/8" [54]
7-1/4" [184]
Roll
20-7/8" [530]
24-1/4" [616]
13-1/2"
6-1/4" 7-1/4"
6-1/4"
5-3/4"
11-3/4"
2
3
2
3
1
1
25-1/2"
27"
20-1/4"
Inside
Track
4" Minimum Clearance
81-1/2"
Door
Removal
74-1/2"
Doors Up
17"
Clearance
34"
Load
Height
63"
Machine
Height
62"
19"
7-1/2"
3
12
SIDE VIEW
Plan View
Side View
Front View
Typical Table Construction
Straight Through
Corner Configuration
Volume crated: 45 cu. ft./1.3 cu.m.
Shipping weight crated: 242 lbs./110 kg.
Distance between tables: 25-3/8"/645mm