Changhong Electric LED39B3100H User manual

TV
Operation Manual
UK
C Z
SK
PL
Jankovcova 1037/49,170 00 Praha 7,Czech Republic
Tel: [phone]
Fax: [phone]
Service E-mail: [email protected]
Web site: www.changhongeurope.com
CHANGHONG EUROPE ELECTRIC S.R.O.
签名 日期
设计
审核
电路会签
软件会签
工艺会签
结构会签
通知编号
图号
规格
封面纸张
内文纸张
机芯
A5
７０ｇ双胶纸
１５７ｇ铜版纸彩印
3
Model: LED39B3100H
9
广制TZ００４４Ｒ
ＬＳ１Ｂ＋ＣＩ（３０８）
ＪＵＣ０．０１８．０００７９４５２

Contents UK
Safety instructions……………………………………………………....…………… 3
Getting Started…………………………...………………………..……..…………… 5
Battery replacement……………………………..……………………….………… 5
Hotel Mode
Warning……………………………………………………………………..…..……… 1
Installing Batteries in the Remote Control……………………………..………… 5
Using the remote control…………………………………………………….……... 5
Cable Installation……………………………………………………………………. 6
Remote Control…………………………..…………………………………………… 7
Connection and setup…………………...…………………………………………... 6
Basic Operation……………………………………………………………………... 9
Turning on and off the TV………………………………………………………….. 9
Programme Selection…………….……………………………………………...... 9
Volume adjustment………………………………………………………………..... 9
Changing the Input Source…..………………………………………………….... 9
QUICK START GUIDE……………….………………………………………….….10
Menu Operation………………………………………………………………………. 11
How to Navigate Menus…………………………………………………………....11
Using USB mode………………………………………………………………..….20
…………………………………………………………………….…..22
MHEG5…………………………………………………………………………….…23
Important Unique Buttons.................................................................................24
PROGRAMME GUIDE………………………………….………………………..…24
Channel List……………………………………………………………………….…24
Teletext……………………………………………………………………………….....25
Using the teletext feature…………………........................................................ 25
Troubleshooting Guide………………………………………………………….......26
Troubleshooting…………….…………………………………………………….....26
Maintenance……………………………………………………………………........27
8Specifications………………………………………………………………………… 2
Favorite List……………………………………………………………………..……24
CHANNEL Menu…………………………………………………………………….12
OPTION Menu…………………………………………………………………….…17
PICTURE Menu………………………………………………………………..……15
SOUND Menu………………………………………………………………………..16
TIMER Menu…………………………………………………………………………16
LOCK Menu…………………………………………………………………...….….19
............................................................................... 29
Securing the TV to the Wall

Warning
REGULATORY INFORMATION
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
CAUTION
DO not attempt to modify this product in any way without written authorization
from supplier. Unauthorized modification could void the user's authority to operate
this product.
It is not recommended to keep a certain still image displayed on the screen for a
long time as well as displaying extremely bright images on screen.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1

Warning
WARNING
To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To
Rain Or Moisture.
The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
The Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Attention should be drawn to the environmental aspects of battery disposal. Don’t
throw used batteries in dustbin. Please contact your retailer in order to protect the
environment.
Keep minimum distances (5cm) around the apparatus for sufficient ventilation;
(Minimum distance around the apparatus for sufficient ventilation.)
No naked flame sources, such as lighted candles, should be placed on the
apparatus;
To prevent the spread of fire, keep candles or other open flames away from this
product at all times.
The device may be malfunction when under electrostatic discharge. It can be
manually resumed by power off and power on again.
CAUTION connecting the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that appliance and has no additional outlets
or branch circuits.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions could result in electric shock or
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits the appliance.
The MAINS plug is used as the disconnect device, and the disconnect device shall
remain readily operable.
Figures and illustrations in this User Manual are provided for reference only and
may differ from actual product appearance. Product design and specifications may
be changed without notice.
To avoid any injury caused by overturn of the product, please always ensure the
whole product was place within the table surface in horizontal.
license from SRS Labs, Inc.
is a trademark of SRS Labs, Inc. TruSurround HD technology is
incorporated under
fire. Periodically examine the cord of your appliance, and if its appearance
2

Safety instructions
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
7. Do not block any of the ventilation
openings. Install in accordance with
the manufacturer's instructions.
5. Do not use this apparatus near water.
8. Do not install near any heat source
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
6. Clean only with a dry cloth.
9. Do not defeat the safety purpose of
the polarized or grounding type plug.
A polarized plug has two blades with
one wider than other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong is provided for your
safety. When the provided plug does
not fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.
3

Safety instructions
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles,
and the point where they exit from
the apparatus.
13. Unplug this apparatus during
lightning storms or when unused for
long periods of time.
11. Only use the attachments/
accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
power supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been
dropped.
ON DISPOSAL
-The fluorescent lamp used in this product containsa small amount of mercury.
-Do not dispose of this product with general household waste.
-Disposal of this product must be carried out in accordance to the regulations of
your local authority.
NOTE
This is normal, there is nothing wrong with TV.
-Some minute dot defects may be visible on the screen, appearing as tiny red,
performance.
-Avoid touching the screen or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effect on the screen.
-If the TV feels cold to the touch, there may be a small "flicker" when it is turned on.
green, or blue spots. However there has no adverse effect on the monitor's
4

Getting Started
Usingtheremotecontrol
When using the remote control, aim it at remote sensor on the television. If there is an
object between the remote control and the remote sensor on the unit, the unit may not
operate.
Point the remote control at the REMOTE SENSOR located on the television.
When using this television in a very brightly lit area, the infrared REMOTE CONTROL
SENSOR may not work properly.
The recommended effective distance for using the remote control is about 7 metres.
Installing Batteries in the Remote Control
1. Open the cover at the back of the remote control.
2. Install two AAA size batteries. Make sure to match
the “+” and “-” ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Batteryreplacement
You will need to install the supplied batteries into the remote control to make it operate
following the instruction below.
When the batteries become weak, the operating distance of the remote control will be
greatly reduced and you will need to replace the batteries.
Notes on Using Batteries:
The use of the wrong type of batteries may cause chemical leakage and/or explosion.
Please note the following:
Always ensure that the batteries are inserted with the + and - terminals in the correct
direction as shown in the battery compartment.
Different types of batteries have different characteristics. Do not mix different types.
Do not mix old and new batteries. Mixing old and new batteries will shorten battery
life and/or cause chemical leakage.
Replace batteries as soon as they do not work.
Chemicals which leak from batteries may cause skin irritation. If any chemical matter
seeps out of the batteries, wipe it up immediately with a dry cloth.
The batteries supplied with the product may have a shorter life expectancy due to
storage conditions. Remove the batteries whenever you anticipate that the remote
control will not be used for an extended period.
The batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION:
It may result in an explosion if batteries are replaced incorrectly.
Only replace batteries with the same or equivalent type.
5

Connection and setup
CableInstallation
Please read the relevant content in "Notice for Maintenance and Safety" carefully
before the installation and use.
1. Take out the TV from the package and put it in a drafty and flat place.
NOTE:
When you plug or unplug the TV, computer or other equipments, you must make
sure that the AC power has been already shut down; when unplugging the power
cable or signal cable, please hold the plug (the insulated part), do not draw the body
of the cable.
2. The RF output terminal can be connected with the RF input port of the TV.
3. The output AV terminal of DVD can be connected with the AV input port of the TV
through AV cable.
end of the VGA cable with the VGA port on the TV, and tighten the bolts clockwise on
the each end of VGA cable.
NOTE:
While connecting the 15-pin VGA, please do not insert the plug overexertedly, for
fear the pin might be broken.
the HDMI cable with the HDMI port on the TV.
NOTE:
While connecting the HDMI, please aim at carefully, do not insert overexertedly,
for fear the pin might be broken.
correctly.
NOTE:
The range of power input for the TV is 100-240V~ 50/60Hz, do not connect the TV
power input port with the AC power out of the above range.
Please hold the insulated part of the plug when you are unplugging the power
cable, do not touch directly the metallic part of the cable.
8.
Connect the AC power cable with 100-240V~ power supply.
NOTE:
channel.
COMPONENT and AV can not be used at same time for they share of one audio
The output COMPONENT(YPbPr) terminal of DVD can be connected with the
COMPONENT(YPbPr) input port of the TV through AV cable.
4.
Connect one end of the VGA cable with the VGA port on computer, connect the other
5.
Connect one end of the HDMI cable with HDMI output port, connect the other end of
6.
Check and make sure that all AV cables are connected with the corresponding ports
7.
Connect SCART socket input or output from an external device to these jacks.
9.

6

Remote Control
The buttons of the original remote control are as following:
EXIT
:Exit OSD Menu.
INDEX: Press to enter the Recorded list.
(In DTV mode)
1. : Power, switch on or off TV set.
INFO: Press to display the current
program information on the screen.
i
: Go to the index page.
: Press to mute or restore sound.
SOURCE: Press to select signal source.
?
: Reveal the hidden information of
some teletext pages.
for various optional adjustable settings.
ENTER: Press to execute the selected
item in the menu screen or enter the
desired value in any input mode.
VOL+/VOL-: Press to adjust the volume
level up or down.
CH+/CH-: Press to select channels in
ascending or descending order.
▲/▼/◄/►:To select the direction.
MENU: Press to enter the menu screen
2.
12.
8.
9.
11.
14.
10.
16.
15.
: Hold the teletext page on display,
press again to release.
: Stop (in USB/PVR mode).
3. STILL: Press to hold the picture.
RADIO: Press to interchange Radio and
DTV programs when there is Radio
program (In DTV mode).
4.
: Enter the Teletext, press again for
MIX mode, press this button again to
exit.
: Play / Pause (in USB/PVR mode).
5.
: Press to select different images sizes.
: Change size of teletext screen in
display mode.
6.
blue key navigation link.
: Fast reverse (in USB mode).
: Fast forward (in USB mode).
: Previous (in USB mode).
: Next (in USB mode).
7. COLOR BUTTONS: Red/ green/ yellow/
13.
VOL CH
12 3
456
7 8 9
EXIT
0DVB
EPG
USB
25 26
27 28
7