Channel Master CM-7400 User manual

Quick Start Guide
CM-7400

COPYRIGHT
©2011 Channel Master. All rights reserved. This document contains proprietary information protected by copyright. No part of this
publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written consent of Channel Master, 2260 W. Broadway Rd, Mesa, AZ 85202, U.S.A.
DISCLAIMER
IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPYRIGHT OWNER
OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR OTHER REMEDIES.
TRADEMARKS
Channel Master, Channel Master TV and “The Most Advanced Subscription Free HDTV Solution” are trademarks of
Channel Master. All other trademarks are the property of their respective owners.
CHANGES
The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the
preparation of this document to assure its accuracy, Channel Master assumes no liability resulting from the use of the information contained
herein. Channel Master reserves the right to make changes in the product design without reservation and without notication to its users.
P/N: CM-7400

1
Table of Contents
Table of Contents
Overview
2
4
6
7
8
Step 1 - Connecting Video
14
16
Step 2 - Connecting TV Source
18
Step 3 - Connecting Audio
20
21
Step 4 - Connecting Network
22
23
Step 5 - Powering Up
24
25
Appendix
26
35
36

Important Safety Instructions
2
Important Safety Instructions
WARNING:

Important Safety Instructions
3

Contents
4
Contents

Contents
5

6
Front Panel
Front Panel
BackMenuOKDirectional

Back Panel
7
Back Panel

Remote Control
8
Remote Control

Remote Control
9
TV
STB
AUX
ARROW KEYS
OK
REPLAY
REW
FF
SKIP
REC
PAUSE
PLAY
STOP

10
Remote Control
Remote Control
Controlling Your TV and other
A/V Devices
TVSTB
AUX
1.
2.
NOTE:
POWER
Toggle Power Key Punch-through Functionality

11
Remote Control
Vol +/-MUTE
Toggle Power Key Punch-through
Functionality
To Program a TV or AUX device
1.
2.
3.
TVAUX
NOTE:AUX
4.
NOTE:
5.
POWER
NOTE:
Toggle Power Key Punch-through Functionality
POWER
POWER
1. STB

12
Remote Control
STB
2. POWER
3.
a.1
b.0
NOTE:
Toggle Volume Key Punch-through Functionality
Vol +/-MUTE
1.
same
time
2.
same time
1. STB
2. STB
3. 0
Auto Search Procedures
1.
2. TV
AUX

Remote Control
13
NOTE:AUX
3. POWER
4.
CH UPCH DOWN
a.CH UP
NOTE:
b.CH DOWN
NOTE:
5.
OK
6.
OK
NOTE:UP
DOWN
UPDOWN

Step 1 - Connecting Video
14
Step 1 - Connecting Video
OPTION #1 (Recommended)
Connect to HDMI
HDTV

Step 1 - Connecting Video
15
OPTION #2
Connect to Component Video*

16
Step 1 - Connecting Video
Step 1 - Continued
OPTION #3
Connect to Composite Video
SDTV

Step 1 - Connecting Video
17
OPTION #4
Connect to Coaxial

18
Step 2 - Connecting to Source
Step 2 - Connecting TV Source
OPTION #1
Connect to Outdoor or Indoor Antenna Source
(ATSC Antenna)
Other manuals for CM-7400
2
Table of contents
Other Channel Master DVR manuals

Channel Master
Channel Master CM-7000PAL DVR User manual

Channel Master
Channel Master DVR+ User manual

Channel Master
Channel Master CM-7000PAL DVR User manual

Channel Master
Channel Master CM-7400 User manual

Channel Master
Channel Master DVR+ User manual

Channel Master
Channel Master CM-7000PAL DVR User manual

Channel Master
Channel Master DVR+ User manual

Channel Master
Channel Master CM-7000PAL DVR User manual