Chauvet Professional Amhaze User manual

User Manual

Edition Notes
Amhaze™ User Manual Rev. 05
Edition Notes
The Amhaze™ User Manual Rev. 05 covers the description, safety precautions,
installation, programming, operation, and maintenance of the Amhaze™.
CHAUVET® released this edition of the Amhaze™ User Manual in May 2012.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET®
or CHAUVET). The CHAUVET® logo in its entirety including the CHAUVET name
and the dotted triangle, and all other trademarks on this manual pertaining to
services, products, or marketing statements (example: It’s Green Thinking™) are
owned or licensed by CHAUVET®. Any other product names, logos, brands,
company names, and other trademarks featured or referred to within this document
are the property of their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this user manual in its entirety, including but not
limited to pictures, logos, trademarks, and resources.
© Copyright 2012 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for
professional information purposes only. CHAUVET® expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its content for
any other purpose without its written consent.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 inches),
double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the
content accordingly.
Intended Audience
Any person in charge of installing, operating, and/or maintaining this product should
read the guide that shipped with it as well as this manual in their entirety before
installing, operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any error or
omissions in this document. CHAUVET® reserves the right to revise this document
and to make changes from time to time in the content hereof without obligation of
CHAUVET® to notify any person or company of such revision or changes. This
does not constitute in any way a commitment by CHAUVET® to make such
changes. CHAUVET® may issue a revision of this manual or a new edition of it to
incorporate such changes.
Document Revision
The Amhaze™ User Manual Rev. 05 supersedes all previous versions of this
manual. Please discard any older versions of this manual you may have, whether in
printed or electronic format, and replace them with this version.
Author Date Editor Date
D. Couppe 5/14/12 M. Graham 11/22/11

Table of Contents
Amhaze™ User Manual Rev. 05 -a-
Table of Contents
1. Before You Begin...............................................................................................1
What Is Included............................................................................................................ 1
Unpacking Instructions................................................................................................... 1
Claims ...................................................................................................................................1
Typographic Conventions............................................................................................... 1
Icon Meaning................................................................................................................. 1
Product at a Glance ....................................................................................................... 1
Safety Notes.................................................................................................................. 2
2. Introduction........................................................................................................3
Product Description........................................................................................................ 3
Features ........................................................................................................................ 3
Additional Features.................................................................................................................3
Product Overview........................................................................................................... 4
3. Setup...................................................................................................................5
AC Power ...................................................................................................................... 5
AC Plug .................................................................................................................................5
Resetting the Breaker.............................................................................................................5
DMX Linking .................................................................................................................. 6
DMX Mode.............................................................................................................................6
Mounting........................................................................................................................ 6
Orientation .............................................................................................................................6
Rigging..................................................................................................................................6
4. Operation............................................................................................................7
Preparation.................................................................................................................... 7
Control Panel Description............................................................................................... 7
Startup........................................................................................................................... 8
Timer Operation............................................................................................................. 8
Continuous Operation.................................................................................................... 8
Programming................................................................................................................. 9
Timer Mode Parameters.........................................................................................................9
Continuous Mode Parameters.................................................................................................9
DMX Address.........................................................................................................................9
DMX Values................................................................................................................... 9
2-Channel Mode.....................................................................................................................9
Menu Map.....................................................................................................................10
5. Technical Information......................................................................................11
Hazer Maintenance.......................................................................................................11
Storage.........................................................................................................................11
Troubleshooting Guide..................................................................................................12
Returns Procedure........................................................................................................13
Claims ..........................................................................................................................13
Contact Us....................................................................................................................13
Technical Specifications................................................................................................14

-b- Amhaze™ User Manual Rev. 05
NOTES

Before You Begin
Amhaze™ User Manual Rev. 05 -1-
1. Before You Begin
What Is
Included
•One Amhaze™ with Flight Case
•One Power Cord (2 M)
•One Fluid Tank (5 Liter)
•One Warranty Card
•One User Manual
Unpacking
Instructions
Immediately upon receiving this product, carefully unpack and check the container. Make
sure you have received all the parts indicated above and all the parts are in good condition.
Claims
If the container or the material inside the container (the product and included accessories)
appear damaged from shipping, or show signs of mishandling, upon receipt notify the
carrier immediately, not CHAUVET®. Failure to notify the carrier in a timely manner may
invalidate your claim. In addition, keep the container and all the packing material for
inspection.
For other issues such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET® within seven (7) days of receiving the
merchandise.
Refer to the Contact Us section in this manual for addresses and phone numbers.
Typographic
Conventions
Convention
Meaning
1~512
A range of values in the text
50/60
A set of mutually exclusive values in the text
Claims
A new term, or a section or chapter in this document
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU > Settings
A sequence of menu options
1~10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Icon Meaning
Icon
Meaning
This icon indicates critical installation, configuration, or operation
information. Failure to comply with this information may render the
product partially or completely inoperative, damage third-party
equipment, or cause harm to the user.
This icon indicates important installation or configuration
information. Failure to comply with this information may prevent
the product from functioning correctly.
This icon indicates useful, although non-critical information.
The term “DMX” used throughout this document refers to the USITT DMX512-A
transmission protocol.
Product at a
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Auto-ranging Power Supply
x
Sound Activated
x
Resettable Breaker
P
DMX
P
User Serviceable
x
Master/Slave
x
Duty Cycle
x

Before You Begin
-2- Amhaze™ User Manual Rev. 05
Safety Notes
There is risk of burns or electric shock while operating this product.
Read all the following Safety Notes before working with this product. These Notes include
important information about the installation, usage, and maintenance of this product.
There are no user serviceable parts in this product. Any reference to servicing in
this User Manual applies only to properly certified CHAUVET® technicians. Do not
open the housing or attempt any repairs unless you are certified.
Please refer to all applicable local codes and regulations for the proper installation
of this product.
Personal Safety
•ALWAYS disconnect this product from its power source before cleaning.
•ALWAYS connect this product to a grounded circuit to avoid the risk of electrocution.
•DO NOT touch the output nozzle on this product. It is very hot during operation and it
may remain hot for several hours after turning the unit off.
•DO NOT add any flammable liquid (alcohol, perfume, oil, gasoline, etc.) to the fog
liquid.
•DO NOT drink the fog liquid. If ingested, call a doctor at once.
•DO NOT allow the fog liquid to touch your skin or eyes. Rinse affected area with plenty
of water and call a doctor.
Mounting and Rigging
•DO NOT install this product where it may be exposed to rain or moisture.
•NEVER hang this product, although product may be mounted to the top of truss with a
ratchet strap.
•DO NOT mount this product on a flammable surface (e.g., wood, linoleum, carton,
plastic, or carpet).
•ALWAYS install this product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
•ALWAYS make sure that there are no flammable materials close to the unit while
operating.
•
ALWAYS use the handles to carry this product.
Power and Wiring
•NEVER connect this product to a dimmer pack or rheostat.
•NEVER disconnect this product by pulling or tugging on the power cable.
•ALWAYS make sure that you are connecting this product to the proper voltage, as per
the specifications in this manual or on the product’s sticker.
Operation
•DO NOT operate this product if you see damage on the housing, fluid tank, or cables.
In any of these cases, have the damaged parts replaced by an authorized technician at
once.
•DO NOT cover the ventilation slots when this product is operating to avoid internal
overheating.
•ALWAYS empty this product before storing or transporting it.
•The maximum ambient temperature (Ta) is 104° F (40° C). DO NOT operate this
product at a higher temperature.
•In case of a serious operating problem, stop using this product immediately!
•Depending on the amount of fog/haze generated, all fog machines may set off smoke
detectors.
In the unlikely event that your CHAUVET® product may require service, please
contact CHAUVET® Technical Support.

Introduction
Amhaze™ User Manual Rev. 05 -3-
2. Introduction
Product
Description
The Amhaze™ is a professional, water-based, DMX controllable haze machine that
provides continuous output with various degrees of density.
It consists of a chassis that contains the pump, fan, power supply, DMX connections, and
control panel. It comes installed in a stackable flight case that also provides room to keep
the fluid tank during operation.
Features
•Operating mode:
2-channel: Output volume, fan speed
•Continuous output
•Haze output and fan speed controllable locally or via DMX
•Stackable flight case
•Onboard system timer
•Resettable circuit breaker
•Silent operation
Additional
Features •Neutrik® powerCON® A connector
•3- and 5-pin DMX input and output connectors
•LCD display

Introduction
-4- Amhaze™ User Manual Rev. 05
Product Overview
Control Panel (LCD)
3- & 5-pin DMX
connectors
Control Panel
(Buttons)

Setup
Amhaze™ User Manual Rev. 05 -5-
3. Setup
AC Power
This product comes in two models, each with a fixed input voltage power supplies, either
120 V, 60 Hz or 230 V, 50 Hz. Therefore, you have to order the correct model for the line
voltage in your area.
Make sure that you are connecting this product to the proper voltage, as per the
specifications in this guide or on the product’s sticker.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
The listed current rating indicates the maximum current draw during normal operation. For
more information, download the document Sizing the Circuit Breakers from the
CHAUVET® website: www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Amhaze™ comes with a power input cord terminated with a Neutrik® powerCON® A
connector on one end an Edison plug on the other end (US market). If the power input cord
that came with your product has no plug or you need to change the plug, use the table
below to wire the new plug.
Connection
Wire (US)
Wire (Europe)
Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Disconnect this product from the power outlet before resetting the breaker.
Resetting the
Breaker
This product is equipped with a resettable circuit breaker on the power input circuit.
If the breaker trips, all sections of this product will lose power. Please see the instructions
below for resetting this breaker.
Remove the power cord from mains power.1. Allow unit to cool for 15 minutes.2. After 15 minutes, you may attempt to reset the breaker by pressing the button with3. your index finger.
Plug the product’s power cord into the power outlet and continue using as4. recommended.
If the breaker does not reset (the breaker button will not remain inserted), contact
CHAUVET® immediately, as this indicates a possible internal malfunction.

Setup
-6- Amhaze™ User Manual Rev. 05
DMX Linking
You may link the Amhaze™ to a DMX controller using a standard DMX serial connection. If
using other DMX compatible units with this product, it is possible to control them
individually with a single DMX controller.
DMX Mode
The Amhaze™ uses the standard DMX data connection for the 2-Channel DMX mode.
Refer to the Introduction chapter for a brief description of this mode.
Refer to the Operation chapter to learn how to configure the Amhaze™ to work in this
mode.
The DMX Values section will provide you with detailed information regarding the DMX
modes.
Mounting
Before mounting this product, read and follow the Safety Notes in this manual.
Orientation
Always mount this product in any safe position while making sure that there is adequate
room around it for ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends following the general guidelines below when mounting this
product.
•When selecting an operation location, consider ease of access to this product for
operation, programming adjustments, and routine maintenance as well as the vicinity to
a suitable power outlet.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
•Never mount the product in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
•Never mount this product on a flammable or heat sensitive surface, such as carpet,
linoleum, wood, paper, carton, or plastic.
•Never hang this product, although product may be mounted to the top of truss with a
ratchet strap.
•Make sure that the place on which you mount this product can safely support its weight
without vibrations. See the Technical Specifications for weight and size details.
Procedure
The Amhaze™ comes in a stackable flight case. You only need to find a suitable place to
set it up.
Follow the instructions in the Preparation section to setup the Amhaze™ once properly
located.

Operation
Amhaze™ User Manual Rev. 05 -7-
4. Operation
Preparation
Once installed, you have to prepare the Amhaze™ for operation. To do so, follow these
steps:
Open both ends of the flight case.1. Pull out the fluid tank.2. Remove the cap of the fluid tank.3. Verify that the two plastic hoses attached to the cap are in place and in good4. condition.
Pour Chauvet (PHF) haze fluid inside the tank.5. Replace the cap of the fluid tank making sure that is tightly closed6. Reinsert the tank.7. Make sure that the plastic hose that goes from the cap to the hazer is not bent.8. To direct the haze up or down, pull the haze guide from the front panel and install it in9. the desired position.
Only use CHAUVET® approved (PHF) haze fluid. Otherwise, you might not have
satisfactory results. In addition, the unapproved fluid can damage the Amhaze™, or
cause harm to humans or animals.
Control Panel
Description
Before using the Amhaze™, you should become familiar to the control panel.
The table and diagram below will provide you with a description of its buttons and
functions.
Button Function
<FUNCTION> Enters the programming mode
<VOLUME> Controls the haze pump to modify the output volume
<TIMER> Starts the timer controlled operation
<STOP> Stops the current operation, whether manual or timer controlled
<ENTER> Enables the currently displayed menu or sets the currently selected value
in to the current function
<UP> Navigates upward through the menu list and increases the numeric value
when in a function
<DOWN> Navigates downward through the menu list and decreases the numeric
value when in a function
Control Panel Diagram

Operation
-8- Amhaze™ User Manual Rev. 05
Startup
The Amhaze™ does not have an On/Off switch. As soon as you connect the Amhaze™ to
the power outlet, it will start operating.
To start up the Amhaze™, do the following:
Insert the Neutrik® powerCON® A connector of the power input cord into the lockable1. (blue) socket on the back of the Amhaze™.
Turn the connector right until it locks in position.2. Plug the power input cords to a suitable power outlet (the display will show “Warm Up3. Cycle”).
Wait about two minutes for the warm-up to complete. During this time, the Amhaze™4. will not produce any haze.
After warming up, the display will show “READY TO HAZE FLUID SENSOR5. ON/OFF”.
Press <VOLUME>.6. Adjust haze output volume by using the <UP> or <DOWN>.7. Press <STOP>again to stop haze production.8.
Repeat the Startup procedure after transporting the Amhaze™ or after a fluid refill.
Timer
Operation
When in Timer mode, the Amhaze™ will produce haze in pre-configured time intervals
defined by the TIME INTERVAL and TIME DURATION menu options. In addition, the
output volume during Timer mode is set by the TIMER VOLUME menu option. See the
Programming section for details about how to configure these parameters.
To operate in Timer mode, do the following:
Press <TIMER> (the display will show a countdown of the Interval Timer).1. When the counter reaches zero (0), the Amhaze™ will start producing haze.2. The hazing duration is set by the TIMER DURATION menu option.3. The hazing volume during Timer mode is set by the TIMER VOLUME menu option.4. This cycle will repeat itself until you press <STOP>again or until the Amhaze™ runs5. out of fluid.
The Amhaze™ can produce continuous haze without reheating. This means that
hazing will start immediately each time the Interval timer reaches zero (0).
Continuous
Operation
In the Continuous mode, the Amhaze™ will produce haze without interruptions. The output
volume is set in the VOLUME MODE OUT menu option. See the Programming section for
details about how to configure this parameter.
To operate in Continuous mode, do the following:
Press <VOLUME> (the display will show “VOLUME MODE OUT”and the percentage1. of the output volume).
This mode will continue itself until you press <STOP>or until the Amhaze™ runs out2. of fuel.
The Amhaze™ can produce continuous haze without reheating. This means that
hazing will start immediately each time you press <VOLUME>.

Operation
Amhaze™ User Manual Rev. 05 -9-
Programming
The Programming mode allows you to change the options that affect the various operating
modes as well as setting the DMX address.
Timer Mode
Parameters
These parameters determine the on and off intervals as well as the output volume when
the Amhaze™ is in Timer mode.
To configure these parameters do the following:
Press <FUNCTION> repeatedly until “TIME INTERVAL” shows on the display.1. Use <UP> or <Down> to set the time off timer (1~200 s).2. Press <FUNCTION> repeatedly until “TIME DURATION” shows on the display.3. Use <UP> or <Down> to set the time on (1~200 s).4. Press <FUNCTION> repeatedly until “TIMER VOLUME”shows on the display.5. Use <UP> or <Down> to set the haze volume (1~100%).6.
Continuous Mode
Parameters
These parameters affect the haze and fan volumes when the Amhaze™ operates in
Continuous mode.
To configure these parameters do the following:
Press <FUNCTION> repeatedly until “VOLUME MODE OUT” shows on the display.1. Use <UP> or <Down> to set the haze volume (1~100%).2. Press <FUNCTION> repeatedly until “VOLUME MODE FAN” shows on the display.3. Use <UP> or <Down> to set the fan volume (1~100%).4.
During stand-by periods, the fan volume resets to 20% to keep a low noise level.
DMX Address
This parameter determines the DMX starting address of the Amhaze™. Refer to the DMX
Values section to learn the values and assignments of the AmHaze’s 2-channel mode.
The following steps will show you how to configure the DMX starting address.
Press <FUNCTION> repeatedly until “DMX ADDRESS” shows on the display.1. Use <UP> or <Down> to set the DMX starting address (001~511).2.
DMX Values
2-Channel Mode
Channel Function Value Percent/Setting
1 Output Volume
000 ó005
006 ó255
No output
2~100%
2
Fan Volume
000 ó255
20~100%

Operation
-10- Amhaze™ User Manual Rev. 05
Menu Map
Press <Enter>
Press <Function>
Press <Enter>
Use <Up> or <Down> change settings
FLUID Sensor
Start Mode
FLUID DELIVERY
ON
ADD
FLUID
Functions
Menu
(Press <Function>
to Navigate)
TIMER INTERVAL:
1~200 sec
TIMER DURATION:
1~200 sec
FLUID SENSOR:
ON/OFF
TIMER VOLUME:
1~100 %
VOLUME MODE OUT:
1~100 %
VOLUME MODE FAN:
20~100 %
DMX ADDRESS:
1~512
FIRMWARE VERSION:
REV: X.XX
QUICK START:
ON/OFF
WARM UP CYCLE
READY TO HAZE
FLUID SENSOR OFF (or) ON
Auto Display
CHAUVET AMHAZE
(Displayed for 2 seconds)
AIR PUMP FLUID
Sensor Start
Mode
ERROR : FLUID IN
AIR PUMP ERROR

Technical Information
Amhaze™ User Manual Rev. 05 -11-
5. Technical Information
Hazer
Maintenance
Do not allow the hazer to become contaminated. After 40 hours of continuous operation, it
is recommended to run a cleaning solution composed of 80% distilled water and 20%
distilled vinegar through the system to prevent the accumulation of particulate matter in
the heating element.
The recommended cleaning routine is as follows:
Empty all fog liquid from the machine.1. Add cleaning solution to tank.2. Plug unit in and allow it to warm up.3. Run the unit in a well-ventilated area until the tank is almost empty.4. Do not allow the pump to run dry.5. Cleaning is now complete.6.
Before operating the hazer after cleaning it, do the following:
Refill with fog liquid.1. Run the machine briefly to clear any cleaning solution from the pump and heater.2.
Refrain from spinning this product’s fan(s) using compressed air.
Storage
Before storing this product, run distilled water (not tap water) through the system as
described in the cleaning method above. This will help to avoid any particles condensing
inside the pump or heater.
It is strongly recommended to test-run the machine on a monthly basis in order to achieve
its best hazing condition.
NEVER operate the hazer without fluid at any time.

Technical Information
-12- Amhaze™ User Manual Rev. 05
Troubleshooting Guide
Symptom
Cause(s)
Action(s)
Unit powers up but it
generates no haze
Hazer is still cold
Wait until hazer is ready to operate
Wrong fluid
Clean the hazer and use approved fluid
Lack of fluid
Follow the fluid replenishment procedure
Faulty pump
Send unit for repair
Haze comes out but it is
too thick/thin
Erroneous haze volume adjustment
Adjust haze volume as explained
Wrong fluid
Clean the hazer and use approved fluid
Faulty pump
Send unit for repair
Circuit breaker/fuse
keeps tripping/blowing
Excessive circuit load
Reduce total load placed on the electrical circuit
Short circuit along the power wires
Check electrical wiring
Unit does not power up
No power
Check for voltage on outlet
Loose or damaged power cord
Check power cord
Built-in breaker tripped
Follow instruction to reset the breaker
Faulty internal power supply
Send unit for repair
Unit does not respond to
wired DMX or responds
erratically
Wrong DMX addressing
Check unit addressing
Damaged DMX cables
Check DMX cables
Wrong polarity on the controller
Check polarity switch settings on the controller
Loose DMX cables
Check cable connections
Non DMX cables
Use only DMX compatible cables
Bouncing signals
Install terminator as suggested
Long cable / low level signal
Install an optically coupled DMX splitter before a
long section of cable or right after the unit with
the strong signal
Too many units
Install an optically coupled DMX splitter after unit
#32
Interference from AC wires
Keep DMX cables separated from power cables
or fluorescent/black lights
Faulty DMX interface
Send unit for repair
Faulty Main board
Send unit for repair
If you still experience technical problems after trying the above solutions or if you
need to send the unit for repair, contact CHAUVET® Technical Support.

Technical Information
Amhaze™ User Manual Rev. 05 -13-
Returns
Procedure
The user must send the merchandise prepaid, in the original box, and with its original
packing and accessories. CHAUVET® will not issue call tags.
Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before
shipping the unit. Be prepared to provide the model number, serial number, and a brief
description of the cause for the return.
The user must clearly label the package with a Return Merchandise Authorization (RMA)
number. CHAUVET® will refuse any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Once you have received the RMA number please include the following information on a
piece of paper inside the box:
•Your name
•Your address
•Your phone number
•The RMA number
•A brief description of the problem
Be sure to pack the unit properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. As a suggestion, proper UPS packing or
double-boxing is always a safe method to use.
CHAUVET® reserves the right to use its own discretion to repair or replace returned
product(s).
Claims
The carrier is responsible for any damage incurred during shipping to this product or any
part that shipped with it. Therefore, if the received merchandise appears to have damages
caused during shipping, the customer must submit the damage report and any related
claims with the carrier, not CHAUVET®. The customer must submit the report upon
reception of the damaged merchandise. Failure to do so in a timely manner may invalidate
the customer’s claim with the carrier.
For other issues such as missing components or parts, damage not related to shipping, or
concealed damage, the customer must make claims to CHAUVET® within seven (7) days
of receiving the merchandise.
Contact Us
World Headquarters
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
United Kingdom & Ireland
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Voice: [phone] (Press 4)
Fax: [phone]
Email: [e-mail]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk

Technical Information
-14- Amhaze™ User Manual Rev. 05
Technical Specifications
Dimensions and
Weight
Length
Width
Height
Weight
24 in (610 mm)
20.9 in (530mm)
7.8 in (199 mm)
46.3 lbs (21 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Electrical
Power Supply Type
Range
Voltage Selection
Conventional (transformer)
120 V, 60 Hz or 230 V, 50 Hz
Fixed voltage models
Parameter
120 V, 60 Hz
240 V, 50 Hz
Consumption
830 W
900 W
Operating current
6.95 A
3.75 A
Circuit breaker
10 A
5 A
Power I/O
US/Worldwide
Europe
Power input connector
Neutrik® powerCON® A
Neutrik® powerCON® A
Power Cord plug
Edison (US)
Local plug
Haze Production
Parameter
Value
First heating-up time (cold hazer)
4 minutes
Heater temperature (after warm-up cycle completed)
446º F (230º C)
Fluid consumption (at 100% output)
4.7 ml per minute
Approved fluid
PHF
Tank capacity
5 liters
Output
3,000 cfm
Thermal
Max. External Temperature
Cooling System
104° F (40° C)
Fan
DMX
I/O Connectors
Connector Type
Channel Range
3- and 5-pin XLR
Sockets
2
Ordering
Product Name
Item Code
Item Number
Amhaze™ (120 V, 50/60 Hz)
99070313
AMHAZE
Amhaze™ (240 V, 50/60 Hz)
99070316
220VAMHAZE
Amhaze™ PHF - Premium
Haze Fluid
14070461 PHF

Technical Information
CHAUVET®
5200 NW 108th Avenue
Sunrise, FL 33351 (USA)
[phone] – [phone]
FAX [phone]
www.chauvetlighting.com
Amhaze™ User Manual Rev. 05
May 2012