Chauvet Professional Ovation E-910FC IP User manual

User Manual

Ovation E-910FC IP User Manual Rev. 1
EDITION NOTES
The Ovation E-910FC IP User Manual includes a description, safety precautions, installation,
programming, operation and maintenance instructions for the Ovation E-910FC IP.
Trademarks
CHAUVET, the Chauvet logo and Ovation E-910FC IP are registered trademarks or trademarks of
Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2018 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com
Document Revision
This Ovation E-910FC IP User Manual is the 1st edition of this document. Go to
www.chauvetprofessional.com for the latest version.

Ovation E-910FC IP User Manual Rev. 1
Table of Contents
TOC 1 of 2
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 3
What Is Included ........................................................................................... 3
Claims ........................................................................................................... 3
Manual Conventions ..................................................................................... 3
Symbols ........................................................................................................ 3
Safety Notes.................................................................................................. 4
Personal Safety.............................................................................................................. 4
Mounting and Rigging .................................................................................................... 4
Power and Wiring........................................................................................................... 4
Operation ...................................................................................................... 4
Expected LED Lifespan................................................................................. 5
2. Introduction ................................................................................ 6
Description .................................................................................................... 6
Features........................................................................................................ 6
Lens Tube ..................................................................................................... 6
Product Overview.......................................................................................... 7
Product Dimensions ...................................................................................... 8
3. Setup ........................................................................................... 9
AC Power...................................................................................................... 9
AC Plug .......................................................................................................................... 9
Power Linking................................................................................................ 9
DMX Linking.................................................................................................. 9
DMX Personalities.......................................................................................................... 9
Remote Device Management (RDM) ............................................................ 9
Master/Slave Connectivity............................................................................. 10
Mounting ....................................................................................................... 10
Orientation...................................................................................................................... 10
Rigging ........................................................................................................................... 10
Procedure....................................................................................................................... 11
Manual Beam Focus Control.......................................................................................... 11
Rotating the Barrel Assembly......................................................................................... 12
Accessory Slot ............................................................................................................... 12
4. Operation .................................................................................... 13
Control Panel Operation................................................................................ 13
Control Options ............................................................................................. 13
Programming................................................................................................. 13
Control Panel Lock........................................................................................ 13
Menu Map ..................................................................................................... 13
Configuration (DMX) ..................................................................................... 16
DMX Personalities.......................................................................................................... 16
DMX Control................................................................................................................... 16
DMX Values .................................................................................................. 16
16 Ch.............................................................................................................................. 16
14 Ch.............................................................................................................................. 17
13 Ch.............................................................................................................................. 17
11 Ch.............................................................................................................................. 18
8 Ch................................................................................................................................ 18
6 Ch................................................................................................................................ 18
4 Ch................................................................................................................................ 19
HSV................................................................................................................................ 19
Virtual Color Wheel ........................................................................................................ 20

Table of Contents
Ovation E-910FC IP User Manual Rev. 1
TOC 2 of 2
Configuration (Standalone) ........................................................................... 21
Focus Mode ................................................................................................................... 21
Static Mode .................................................................................................................... 21
Auto Programs ............................................................................................................... 21
Gobo Rotator (for use with Ovation GR-1 IP, sold separately) ...................................... 21
Master/Slave .................................................................................................................. 22
Dimmer Profiles.............................................................................................................. 22
White Balance ................................................................................................................ 22
LED Frequency .............................................................................................................. 22
Fan Mode ....................................................................................................................... 22
Back Light ...................................................................................................................... 22
System Information ........................................................................................................ 22
Factory Reset................................................................................................................. 22
5. Technical Information ................................................................ 23
Product Maintenance .................................................................................... 23
6. Technical Specifications ........................................................... 24
Photometrics Chart ...................................................................................... 25
Photometrics Chart ...................................................................................... 26
Photometrics Chart ...................................................................................... 27
Photometrics Chart ...................................................................................... 28
Photometrics Chart ...................................................................................... 29
Photometrics Chart ...................................................................................... 30
Photometrics Chart ...................................................................................... 31
7. Returns........................................................................................ 32
Contact Us .................................................................................. 33

Page 3 of 33
Ovation E-910FC IP User Manual Rev. 1
BEFORE YOU BEGIN
1. BEFORE YOU BEGIN
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
• Ovation E-910FC IP
• Seetronic Powerkon IP65 Power Cord
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Any reference to data or power connections in this manual assumes the use of
Seetronic IP rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.
!
!

Page 4 of 33
BEFORE YOU BEGIN
Ovation E-910FC IP User Manual Rev. 1
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• Do not submerge this product (IP65). Temporary outdoor operation is fine.
• When using this product in an outdoor environment, use IP65 (or higher) rated power and data
cables. Secure unused power and data ports with attached IP65 covers.
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm,
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
• Not for permanent outdoor installation in locations with extreme environmental conditions. This
includes, but is not limited to:
• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
• Locations where the normal high or low temperatures exceed the temperature ranges in this
manual.
• Locations that are prone to flooding or being buried in snow.
• Areas where the product will be subjected to extreme radiation or caustic substances.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Make sure there are no flammable materials close to the product when operating.
• When hanging this product, always secure to a fastening device using a safety cable.
Power and Wiring
• Always make sure you are connecting the product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• Never connect the product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
• In the event of a serious operation problem, stop using this product immediately!
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
If your Chauvet product requires service, contact Chauvet Technical Support.
!

Page 5 of 33
Ovation E-910FC IP User Manual Rev. 1
BEFORE YOU BEGIN
Expected LED Lifespan
LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in
clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered
LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this
lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting
the overall projection intensity may extend the LEDs’ lifespan.

Page 6 of 33
INTRODUCTION
Ovation E-910FC IP User Manual Rev. 1
2. INTRODUCTION
Description
The Ovation E-910FC IP takes the high-performance, full RGBA-Lime color-mixing LED engine of the
Ovation E-910FC outdoors. Our standard shutter assembly and lenses lend familiarity and ease of use to
this IP65 ERS style fixture that offers Color Temperature presets of 2800 to 6500 K that match the output of
a tungsten source to perfection. Control options include full bit dimming (per color and master), selectable
PWM, RDM and onboard dimming curves selection. Also accessible is our virtual color wheel which
matches popular color gels.
Features
• 4, 6, 8, 11, 13, 14, or 16 channel quad-color LED wash product
• Operating modes:
• 4-channel: Dimmer, virtual color wheel, color temperature, gobo rotator
• 4-channel: Hue, saturation, value, gobo rotator
• 6-channel: RGBAL control, gobo rotator
• 8-channel: RGBAL control, dimmer, strobe, gobo rotator
• 11-channel: RGBAL control, 16-bit dimmer, strobe, virtual color wheel, color temperature,
gobo rotator
• 13-channel: RGBAL control, dimmer, strobe, virtual color wheel, color temperature, auto
programs, auto speed, dimmer mode, gobo rotator
• 14-channel: 16-bit RGBAL and dimmer, strobe, gobo rotator
• 16-channel: 16-bit RGBAL and dimmer, strobe, virtual color wheel, color temperature, gobo
rotator
• Full Color LED (RGBAL) ERS-style lighting fixture for theatre, film and production
• Fully IP65 rated for seasonal use indoors or out
• Use of our standard Ovation beam shaping shutters and lenses lends familiarity and ease of use to
the fixture
• Virtual Color wheel with color matched to popular gel colors
• Color Temperature Presets from 2800 K to 6500 K with high CRI and CQS
• Ultra-smooth 16-bit dimming, and 8-bit dimming curves to complement any lighting scheme.
• Flat, even field of light for superior gobo projection
• RDM (Remote Device Management) for added flexibility
• Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
Lens Tube
The following lens tubes are available for purchase:
• 14° w/ Gel frame (7.5 in/191 mm accessories)
• 19° w/ Gel frame (6.25 in/159 mm accessories)
• 26° w/ Gel frame (6.25 in/159 mm accessories)
• 36° w/ Gel frame (6.25 in/159 mm accessories)
• 50° w/ Gel frame (6.25 in/159 mm accessories)
• 15°–30° w/ Gel frame (7.5 in/191 mm accessories)
• 25°–50° w/ Gel frame (7.5 in/191 mm accessories)

Page 7 of 33
Ovation E-910FC IP User Manual Rev. 1
INTRODUCTION
Product Overview
DMX
In/Out
Display
Seetronic Powerkon In
Barrel Rotation Knobs
Seetronic Powerkon Out
Handle
Pattern Holder Slot
(A-size holder for 3-in patterns.
B-size holder for 2.5-in and 2.75-
in patterns, sold separately)
Framing Shutter (x4)Accessory Slot
Beam Focus Knobs
Gel Frame Holder
Light EngineBarrel
Assembly
Lens Tube
(sold separately)
IP-Rated Plug Covers
Ovation GR-1 IP
Power/Signal
Out

Page 8 of 33
INTRODUCTION
Ovation E-910FC IP User Manual Rev. 1
Product Dimensions
15.79 in
401 mm
26.46 in
672 mm
32.32 in
821 mm
11.34 in
288 mm
7.83 in
199 mm
13.07 in
332 mm 21.85 in
555 mm
8.74 in
222 mm
6.25 in
159 mm
6.25 in
159 mm
7.36 in
187 mm
17.32 in
440 mm
9.72 in
247 mm
11.61 in
295 mm
16.54 in
420 mm

Page 9 of 33
Ovation E-910FC IP User Manual Rev. 1
SETUP
3. SETUP
AC Power
Each Ovation E-910FC IP has an auto-ranging power supply that works with an input voltage range of 100
to 240 VAC, 50/60 Hz. To determine the power requirements for each Ovation E-910FC IP, refer to the
label affixed to the product. You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com..
AC Plug
The Ovation E-910FC IP comes with a power input cord terminated with a Seetronic Powerkon A
connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that
came with your product has no plug, or if you need the change the plug, use the table below to wire the
new plug.
Power Linking
The product supports power linking. You can power link up to 7 products at 120 V; up to 11 at 208 V; or up
to 12 at 230 V. This product comes with a power input cord. Power linking cables are available from
Chauvet for purchase.
DMX Linking
You can link the Ovation E-910FC IP to a DMX controller using a 5-pin DMX connection. If using other
DMX-compatible products with this product, you can control each individually with a single DMX controller.
DMX Personalities
The Ovation E-910FC IP uses a 5-pin DMX data connection for the 4, 6, 8, 11, 13, 14, or 16-channel DMX
personalities.
• Refer to the Introduction for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the Ovation E-910FC IP to work in these
personalities.
• The DMX Values section provides detailed information regarding the DMX personalities.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Ovation E-910FC IP supports RDM
protocol that allows feedback to make changes to menu map options.
• Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging
it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
• To preserve the IP65 rating and the warranty of this product Seetronic
Powerkon cables must be used.
• Insert the attached IP65 rated plugs into the corresponding power/data
connections when not in use.
!
!

Page 10 of 33
SETUP
Ovation E-910FC IP User Manual Rev. 1
Master/Slave Connectivity
The Master/Slave mode allows a Ovation E-910FC IP (the master) to control one or more Ovation E-
910FC IP products (the slaves) without a DMX controller. One Ovation E-910FC IP becomes the master
when running an auto or custom program, or by being in a Static mode.
You must configure each slave’s control panel to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.
•The Operation section of this manual provides detailed instructions on how to
configure the master and slaves.
• If you are not familiar with DMX standards or Master/Slave connectivity,
download the DMX Primer from the Chauvet website
www.chauvetprofessional.com for more information.
To preserve the IP65 rating and the warranty of this product, IP65 data cables must be
used.
!

Page 11 of 33
Ovation E-910FC IP User Manual Rev. 1
SETUP
Procedure
The Ovation E-910FC IP comes with a double-bracketed yoke to which you can either attach mounting
clamps for hanging or simply use as a floor stand. You must supply the mounting clamps. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per product.
For the CHAUVET Professional line of mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram
Manual Beam Focus Control
The Ovation E-910FC IP has a manual focus, which is adjusted as follows:
1. Locate the beam focus knobs at the top and bottom of the barrel assembly.
2. Loosen the knobs by turning them counter-clockwise.
3. Slide the lens tube forward or backward until you achieve the desired focus or beam edge.
4. Tighten the knobs by turning them clockwise, which lock the lens tube’s position.
To avoid changing menu settings while focusing the Ovation E-910FC IP, press and hold
the <ENTER> button for 3 seconds. This will put the product in “Focus Mode” by
increasing the intensity to 100%. To exit out of focus mode, press <MENU>.
Safety Cable
(such as CH-05 from
Chauvet)
Mounting Clamp
(such as CTC-50 or CTC-50HCN
from Chauvet)

Page 12 of 33
SETUP
Ovation E-910FC IP User Manual Rev. 1
Rotating the Barrel Assembly
The Ovation E-910FC IP allows manual rotation of the barrel assembly, as follows:
1. Locate the barrel rotation knobs at the top and bottom of the light engine.
2. Loosen the knobs by turning them counter-clockwise.
• Note: Do not remove the knobs.
3. Rotate the barrel to the desired position, up to 25° in either direction from the centered position.
4. Tighten the knobs by turning them clockwise, which lock the barrel’s position.
Accessory Slot
The Ovation E-910FC IP has an accessory slot, which holds a drop-in iris, a motorized pattern device, or
various other optional accessories (sold separately).
1. Loosen the thumbscrews on the slot cover.
•Note: Do not remove the thumbscrews.
2. Slide the cover forward.
3. Insert an accessory.
•Note: Make sure to insert the accessory correctly. For example, make sure the iris handle
extends upward from the slot.
4. Slide the cover back. Make sure any handles or adjustment tools that stick out the top are able to
function correctly.
5. Tighten the thumbscrews to secure the cover.
Make sure the barrel assembly is oriented with the pattern holder and accessory slots at
the top of the product.
• When not using the accessory slot, replace and secure the slot cover to prevent light
leakage during operation.
• When obtaining any optional accessories, be sure the items are compatible with the
Ovation E-910FC IP.
Iris HandleThumb screws
Accessory
Slot Cover
Sample
Drop-in Iris

Page 13 of 33
Ovation E-910FC IP User Manual Rev. 1
OPERATION
4. OPERATION
Control Panel Operation
Control Options
Set the Ovation E-910FC IP starting address in the 001-512 DMX range. This enables control of up to 46
products in the 11-channel 11CH personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
Control Panel Lock
This setting enables you to activate or disable the control panel lock, which keeps unauthorized users from
changing the product’s settings.
1. Go to the Key Lock main level.
2. Select On or Off.
Menu Map
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the
current function
<UP> Navigates upward through the menu list or increases the numeric value when in a
function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a
function
When the control panel lock is activated, in order to access the products main
programming level, the product will prompt for the passcode. Enter the
passcode as described below.
Main Level Programming Levels Description
DMX
Address 001–509* Selects DMX address (highest channel restricted to personality chosen)
DMX
Channel
4 Ch 4-channel: dimmer, VCW, color
temperature, gobo rotator
6 Ch 6-channel: RGBAL, gobo rotator
8 Ch 8-channel: dimmer, RGBAL, strobe, gobo
rotator
11 Ch 11-channel: 16-bit dimmer, RGBAL, strobe,
VCW, color temperature, gobo rotator
13 Ch
13-channel: dimmer, RGBAL, strobe, VCW,
color temperature, auto program, auto
speed, dimmer speed mode, gobo rotator
14 Ch 14-channel: 16-bit dimmer, 16-bit RGBAL,
strobe, gobo rotator
16 Ch
16-channel: 16-bit dimmer, 16-bit RGBAL,
strobe, VCW, color temperature, gobo
rotator
HSV 4-channel: hue, saturation, value, gobo
rotator

Page 14 of 33
OPERATION
Ovation E-910FC IP User Manual Rev. 1
Virtual
Color Wheel
Virtual Color
Wheel
C3050-Md Yellow
Dimmer
<000–
255>
Virtual color wheel simulates the output of
each gel color. Refer to the Virtual Color
Wheel Chart section for specific values.
C3040-Lt Yellow
C3240-Amb Yellow
C2340-VLt Amber
C2040-Lt Amber
C2050-Md Amber
C2060-Dk Amber
C1050-Lt Red
C1080-Md Red
C1020-NC Pink
C1030-Md Pink
C1630-Dk Pink
C1250-Md Red
Amber
C1060-Dk Red
Amber
C1650-Magenta
C6170-Dk Magenta
C6020-Lt Lavender
C5030-Lt Blue
C5020-VLt Blue
C5430-Lt Blue2
C5070-Blue
C5050-Md Blue
C5060-Dk Blue
C5690- Indigo
C5080-VDk Blue
C5081-VDk Blue2
C4370-Yel Green
C4070-Green
C4550-Turquoise
C4560-Aqua
C4570-Blue Green
Color
Temperature
2800K
Preset white color temperatures. Emulates
a tungsten lamp at the specified color
temperature. Refer to the Color
Temperature Chart section for specific
values.
3200K
3500K
4000K
4500K
5000K
5600K
6000K
6500K
Manual Color Mixer
Red
<000–
255>
Combine red, green, blue, amber, and lime
to make a custom color (0–100%)
Green
Blue
Amber
Lime
Auto Show Auto 1–5 <001–100> Selects automatic programs and program
speed
Gobo
Rotator 0–255 Rotating gobo index
Master/
Slave
Master DMX mode (Master)
Slave Slave mode
Main Level Programming Levels Description

Page 15 of 33
Ovation E-910FC IP User Manual Rev. 1
OPERATION
Dimmer
Mode
Off Linear dimmer
Dimmer 1–3 Dimming curves Dimmer 1 (fast) to
Dimmer 3 (slow)
White
Balance
Off Uses factory default white setting
Manual
Red
<000–
255>
Sets red LED maximum value
Green Sets green LED maximum value
Blue Sets blue LED maximum value
Amber Sets amber LED maximum value
Lime Sets lime LED maximum value
LED
Frequency
600Hz
Sets the PWM frequency
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Fan Mode
Auto Sets the fan to auto mode
On Sets the fan to always on
Off Sets the fan to always off
Silent Sets the fan to silent
Back Light
On Display backlight always on
10S Turns off display backlight after 10 seconds
of inactivity
20S Turns off display backlight after 20 seconds
of inactivity
30S Turns off display backlight after 30 seconds
of inactivity
Key Lock On Turns passcode on or off
Off
Gobo Power On Enables or disables gobo power output
Off
Information
Fixture Hours <_ _ _ _H> Shows total hours the product has been
powered on
Version <V_._> Shows current firmware version
UID <_ _ _ _ _ _ _ _ _ _
_ _> Shows product UID
Reset
Factory
No Resets the product to factory default
settings
Yes
Main Level Programming Levels Description

Page 16 of 33
OPERATION
Ovation E-910FC IP User Manual Rev. 1
Configuration (DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX Personalities
This setting allows you to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (4 Ch, 6 Ch, 8 Ch, 11 Ch, 13 Ch, 14 Ch, 16 Ch, or HSV).
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personalities.
2. Set the starting address:
a. Go to DMX Address main level.
b. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Values
16 Ch
•See the DMX Control section for the highest starting address you can select for
each personality.
• Make sure that the starting addresses on the various products do not overlap due
to the new personality setting.
DMX Personality DMX Address DMX Personality DMX Address
4 509 13 500
6 507 14 499
8 505 16 497
11 502 HSV 509
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Dimmer Fine 000 255 0–100%
3Red 000 255 0–100%
4 Red Fine 000 255 0–100%
5 Green 000 255 0–100%
6 Green Fine 000 255 0–100%
7Blue 000 255 0–100%
8 Blue Fine 000 255 0–100%
9Amber 000 255 0–100%
10 Amber Fine 000 255 0–100%
11 Lime 000 255 0–100%
12 Lime Fine 000 255 0–100%
13 Strobe 000 010
011 255
No function
Strobe, slow to fast
14 Virtual Color Wheel 000 255 See Virtual Color Wheel Chart
15 Color Temperature 000 255 See Color Temperature Chart
16 Gobo Rotator
000 127
128 190
191 192
193 255
Index
Clockwise fast to slow
Stop
Counter-clockwise slow to fast

Page 17 of 33
Ovation E-910FC IP User Manual Rev. 1
OPERATION
14 Ch
13 Ch
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Dimmer Fine 000 255 0–100%
3Red 000 255 0–100%
4 Red Fine 000 255 0–100%
5Green 000 255 0–100%
6 Green Fine 000 255 0–100%
7Blue 000 255 0–100%
8 Blue Fine 000 255 0–100%
9Amber 000 255 0–100%
10 Amber Fine 000 255 0–100%
11 Lime 000 255 0–100%
12 Lime Fine 000 255 0–100%
13 Strobe 000 010
011 255
No function
Strobe, slow to fast
14 Gobo Rotator
000 127
128 190
191 192
193 255
Index
Clockwise fast to slow
Stop
Counter-clockwise slow to fast
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2Red 000 255 0–100%
3 Green 000 255 0–100%
4Blue 000 255 0–100%
5Amber 000 255 0–100%
6Lime 000 255 0–100%
7 Strobe 000 010
011 255
No function
Strobe, slow to fast
8 Virtual Color Wheel 000 255 See Virtual Color Wheel Chart
9 Color Temperature 000 255 See Color Temperature Chart
10 Auto Program
000 010
011 060
061 110
111 160
161 210
211 255
No function
Auto program 1
Auto program 2
Auto program 3
Auto program 4
Auto program 5
11 Auto Speed 000 255 0–100%
12 Dimmer Speed Mode
000 051
052 101
102 152
153 203
204 255
No function
Dimmer speed mode off
Dimmer speed mode 1
Dimmer speed mode 2
Dimmer speed mode 3
13 Gobo Rotator
000 127
128 190
191 192
193 255
Index
Clockwise fast to slow
Stop
Counter-clockwise slow to fast

Page 18 of 33
OPERATION
Ovation E-910FC IP User Manual Rev. 1
11 Ch
8 Ch
6 Ch
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Dimmer Fine 000 255 0–100%
3Red 000 255 0–100%
4 Green 000 255 0–100%
5Blue 000 255 0–100%
6Amber 000 255 0–100%
7Lime 000 255 0–100%
8 Strobe 000 010
011 255
No function
Strobe, slow to fast
9 Virtual Color Wheel 000 255 See Virtual Color Wheel Chart
10 Color Temperature 000 255 See Color Temperature Chart
11 Gobo Rotator
000 127
128 190
191 192
193 255
Index
Clockwise fast to slow
Stop
Counter-clockwise slow to fast
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2Red 000 255 0–100%
3 Green 000 255 0–100%
4Blue 000 255 0–100%
5Amber 000 255 0–100%
6Lime 000 255 0–100%
7 Strobe 000 010
011 255
No function
Strobe, slow to fast
8 Gobo Rotator
000 127
128 190
191 192
193 255
Index
Clockwise fast to slow
Stop
Counter-clockwise slow to fast
Channel Function Value Percent/Setting
1Red 000 255 0–100%
2 Green 000 255 0–100%
3Blue 000 255 0–100%
4Amber 000 255 0–100%
5Lime 000 255 0–100%
6 Gobo Rotator
000 127
128 190
191 192
193 255
Index
Clockwise fast to slow
Stop
Counter-clockwise slow to fast