Chauvet Professional Ovation P-56WW User manual

User Manual

Ovation P-56WW User Manual Rev. 1
EDITION NOTES
The Ovation P-56WW User Manual includes a description, safety precautions, installation, programming,
operation and maintenance instructions for the Ovation P-56WW.
Trademarks
CHAUVET, the Chauvet logo and Ovation P-56WW are registered trademarks or trademarks of Chauvet &
Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company
and product names and logos referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2018 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com
Document Revision
This Ovation P-56WW User Manual is the 1st edition of this document. Go to
www.chauvetprofessional.com for the latest version.

Ovation P-56WW User Manual Rev. 1
Table of Contents
TOC 1 of 2
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 3
What Is Included ........................................................................................... 3
Claims ........................................................................................................... 3
Manual Conventions ..................................................................................... 3
Symbols ........................................................................................................ 3
Safety Notes.................................................................................................. 4
Personal Safety.............................................................................................................. 4
Mounting and Rigging .................................................................................................... 4
Power and Wiring........................................................................................................... 4
Operation ...................................................................................................... 4
Expected LED Lifespan................................................................................. 4
2. Introduction ................................................................................ 5
Description .................................................................................................... 5
Features ........................................................................................................ 5
Product Overview.......................................................................................... 6
Product Dimensions ...................................................................................... 7
3. Setup ........................................................................................... 8
AC Power ...................................................................................................... 8
AC Plug .......................................................................................................................... 8
Power Linking................................................................................................ 8
DMX Linking.................................................................................................. 8
DMX Personalities.......................................................................................................... 8
Remote Device Management (RDM) ............................................................ 8
Master/Slave Connectivity............................................................................. 8
Mounting ....................................................................................................... 9
Orientation...................................................................................................................... 9
Rigging ........................................................................................................................... 9
Procedure....................................................................................................................... 9
Alternate Lens Changing Procedure .............................................................................. 10
4. Operation .................................................................................... 11
Control Panel Operation................................................................................ 11
Control Options ............................................................................................. 11
Programming................................................................................................. 11
Menu Map ..................................................................................................... 11
Configuration (DMX) ..................................................................................... 12
Control Personalities ...................................................................................................... 12
Starting Address............................................................................................................. 12
DMX Values .................................................................................................. 13
6 Ch................................................................................................................................ 13
3 Ch................................................................................................................................ 13
2 Ch................................................................................................................................ 13
1 Ch................................................................................................................................ 13
Configuration (Standalone) ........................................................................... 13
Static Mode .................................................................................................................... 13
Auto Programs ............................................................................................................... 13
Master/Slave .................................................................................................................. 14
Dimmer Profiles.............................................................................................................. 14
LED Frequency .............................................................................................................. 14
Fan Mode ....................................................................................................................... 14
Back Light ...................................................................................................................... 14
System Information ........................................................................................................ 14

Table of Contents
Ovation P-56WW User Manual Rev. 1
TOC 2 of 2
Factory Reset................................................................................................................. 14
5. Technical Information ................................................................ 15
Product Maintenance .................................................................................... 15
6. Technical Specifications ........................................................... 16
Photometrics Chart ...................................................................................... 17
7. Returns........................................................................................ 19
Contact Us................................................................................... 20

Page 3 of 20
Ovation P-56WW User Manual Rev. 1
BEFORE YOU BEGIN
1. BEFORE YOU BEGIN
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
• Ovation P-56WW
• Gel frame holder (7.5 in/191 mm
accessories)
• Neutrik powerCON power cord
• Wide, Medium, and Narrow Lenses
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.
!

Page 4 of 20
BEFORE YOU BEGIN
Ovation P-56WW User Manual Rev. 1
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or
humidity may affect it. (IP20).
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm,
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Make sure there are no flammable materials close to the product when operating.
• When hanging this product, always secure to a fastening device using a safety cable.
Power and Wiring
• Always make sure you are connecting the product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• Never connect the product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.
• In the event of a serious operation problem, stop using this product immediately!
Expected LED Lifespan
LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in
clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered
LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this
lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting
the overall projection intensity may extend the LEDs’ lifespan.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
If your Chauvet product requires service, contact Chauvet Technical Support.
!

Page 5 of 20
Ovation P-56WW User Manual Rev. 1
INTRODUCTION
2. INTRODUCTION
Description
The Ovation P-56WW is a bright, compact, silent par with exceptionally high CRI that is designed for
theatrical and studio applications. This par product produces a homogenized, single-source, flat, even field
of light with the same efficient warm white LED system found in the award-winning Ovation E-260WW
ellipsoidal. Interchangeable lens plates are included for wide, medium, and narrow beam angles. The
Ovation P-56WW also features extremely smooth 16-bit dimming, as well as RDM and PWM for set-up
ease. The product accepts standard 7.5” beam shaping accessories.
Features
• Operating modes:
• 1 Ch: Dimmer
• 2 Ch: 16-bit dimmer
• 3 Ch: 16-bit dimmer, strobe
• 6 Ch: 16-bit dimmer, strobe, auto programs, auto speed, and dimmer speed mode
• Full color PAR style fixture with homogenized single source of light
• Interchangeable lens plates included for wide, medium, and narrow beam angles
• Flat, even field of light
• Quiet operation for use in any situation with fan speed control
• RDM and variable Pulse Width Modulation for setup ease
• Accepts standard 7.5" beam shaping accessories
• 16-bit dimming resolution for smooth fades

Page 6 of 20
INTRODUCTION
Ovation P-56WW User Manual Rev. 1
Product Overview
Fuse
Bracket
Gel Frame
Holder Clip
Gel Frame
Menu
Buttons
3-pin DMX
In/Out
Power In
5-Pin DMX
In/Out
Power
Out
Tilt
Adjustment
Handle

Page 7 of 20
Ovation P-56WW User Manual Rev. 1
INTRODUCTION
Product Dimensions
0.51 in
13 mm
9.38 in
238 mm
3.31 in
84 mm
6.85 in
174 mm
12.83 in
326 mm
7.48in
190 mm
7.48in
190 mm
6.65 in
169 mm
4.72 in
120 mm
10.28 in
261 mm
7.52 in
191 mm
8.15 in
207 mm
17.76 in
451 mm
12.56 in
319 mm

Page 8 of 20
SETUP
Ovation P-56WW User Manual Rev. 1
3. SETUP
AC Power
Each Ovation P-56WW has an auto-ranging power supply that works with an input voltage range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each Ovation P-56WW, refer to the label
affixed to the product. You can also refer to the Technical Specifications chart in this manual. The listed
current rating indicates the maximum current draw during normal operation. For more information,
download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com..
AC Plug
The Ovation P-56WW comes with a power input cord terminated with a Neutrik powerCON A connector on
one end and an Edison plug on the other end (U.S. market). If the power input cord that came with your
product has no plug, or if you need the change the plug, use the table below to wire the new plug.
Power Linking
The product supports power linking. You can power link up to 7 products at 120 V; up to 13 at 208 V; or up
to 14 at 230 V. This product comes with a power input cord. Power linking cables are available from
Chauvet for purchase.
DMX Linking
You can link the Ovation P-56WW to a DMX controller using a 3- or 5-pin DMX connection. If using other
DMX-compatible products with this product, you can control each individually with a single DMX controller.
DMX Personalities
The Ovation P-56WW uses a 3- or 5-pin DMX data connection for the 1 Ch, 2 Ch, 3 Ch, and 6 Ch DMX
personalities.
• Refer to the Introduction for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the Ovation P-56WW to work in these
personalities.
• The DMX Values section provides detailed information regarding the DMX personalities.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Ovation P-56WW supports RDM protocol
that allows feedback to make changes to menu map options.
Master/Slave Connectivity
The Master/Slave mode allows a Ovation P-56WW (the master) to control one or more Ovation P-56WW
products (the slaves) without a DMX controller. One Ovation P-56WW becomes the master when running
an auto or custom program, or by being in a Static mode.
You must configure each slave’s control panel to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
• Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging
it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.
!

Page 9 of 20
Ovation P-56WW User Manual Rev. 1
SETUP
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Procedure
The Ovation P-56WW comes with a double-bracketed yoke to which you can either attach mounting
clamps for hanging or simply use as a floor stand. You must supply the mounting clamps. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per product.
For the CHAUVET Professional line of mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram
• The Operation section of this manual provides detailed instructions on how to
configure the master and slaves.
• If you are not familiar with DMX standards or Master/Slave connectivity,
download the DMX Primer from the Chauvet website
www.chauvetprofessional.com for more information.
Bracket
Adjustment Knob
Mounting Bracket
Safety Cable
(such as CH-05 from
Chauvet)
Mounting Clamp
(such as CTC-50 or CTC-50HCN
from Chauvet)

Page 10 of 20
SETUP
Ovation P-56WW User Manual Rev. 1
Alternate Lens Changing Procedure
The Ovation P-56WW has the ability to have different types of lenses installed. The interchangeable
lenses allow the product to have alternate beam angles.
To remove a lens:
1. Pull knob up.
2. Grab the Tab on the lens and pull it out of the fixture.
To install a lens:
1. Pull knob up.
2. Insert the bottom of the lens at approx the 5 o'clock position with the lens tab located at the 11
o’clock position.
3. Push the top of the lens in and release the knob..
Mounting Diagram
Diffusion filter media (gel) attached to the fixture behind the lens may stick to the
lens being removed. Use caution when removing to prevent damage to the diffusion
gel.
The lens type is molded into the tab.
Pull knob up to release
and change the lens

Page 11 of 20
Ovation P-56WW User Manual Rev. 1
OPERATION
4. Operation
Control Panel Operation
Control Options
Set the Ovation P-56WW starting address in the 001–512 DMX range. This enables control of up to 85
products in the 6-channel 6 Ch personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
Menu Map
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function
<UP> Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
Main Level Programming Levels Description
DMX
Address 001–512* Selects DMX address (highest channel restricted to personality chosen)
DMX
Channel
1 Ch 1-channel: dimmer
2 Ch 2-channel: 16-bit dimmer, dimmer
3 Ch 3-channel: 16-bit dimmer, dimmer, strobe
6 Ch 6-channel: 16-bit dimmer, dimmer, strobe,
auto programs, auto speed, dimmer speed
Static Dimmer <000–255>
Controls intensity
Strobe Controls strobe rate
Auto Show
Auto 1
001-100
Selects automatic programs and auto
program speed
Auto 2
Auto 3
Master/Slave Master DMX mode (Master)
Slave Slave mode
Dimmer
Mode
Off Linear dimmer
Dimmer 1–3 Dimming curves Dimmer 1 (fast) to
Dimmer 3 (slow)
LED
Frequency
600Hz
Sets the PWM frequency
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Fan Mode
Auto Sets the fan to auto mode
On Sets the fan to always on
Off Sets the fan to always off
Silent Sets the fan to silent

Page 12 of 20
OPERATION
Ovation P-56WW User Manual Rev. 1
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
This setting allows you to choose a particular control personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (see table below).
Starting Address
Each product will respond to a unique starting address from the DMX controller. All products with the same
starting address will respond in unison.
1. Go to the DMX Address main level.
2. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
Back Light
On Display backlight always on
10S Turns off display backlight after 10 seconds
of inactivity
20S Turns off display backlight after 20 seconds
of inactivity
30S Turns off display backlight after 30 seconds
of inactivity
Information
Fixture Hours <_ _ _ _H> Shows total hours the product has been
powered on
Version <V_._> Shows current firmware version
UID <_ _ _ _ _ _ _ _ _ _ _
_> Shows product UID
Reset
Factory
No Resets the product to factory default
settings
Yes
Personality Channels
1 Ch 1
2 Ch 2
3 Ch 3
6 Ch 6
• See the Starting Address section for the highest starting address you can select for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the
new personality setting.
Personality Address
1 Ch 512
2 Ch 511
3 Ch 510
6 Ch 507
Main Level Programming Levels Description

Page 13 of 20
Ovation P-56WW User Manual Rev. 1
OPERATION
DMX Values
6 Ch
3 Ch
2 Ch
1 Ch
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Static Mode
The Static mode allows for permanent dimmer and strobe presets without a DMX controller.
1. Go to the Static main level.
2. Select Dimmer or Strobe.
3. Select the desired value (0–255).
Auto Programs
Auto programs allow for dynamic blinder effects without a DMX controller.
1. Go to the Auto Show main level
2. Select the desired auto program (Auto 1–3).
3. Select the desired speed (1–100).
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Dimmer Fine 000 255 0–100%
3 Strobe 000 010
011 255
No function
Strobe, slow to fast
4 Auto Programs
000 010
011 085
086 170
171 255
No function
Auto program 1
Auto program 2
Auto program 3
5 Auto Speed 000 255 0–100%
6 Dimmer Speed Mode
000 051
052 101
102 152
153 203
204 255
Preset dimmer speed from display menu
Dimmer speed off
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3 (slowest)
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Dimmer Fine 000 255 0–100%
3 Strobe 000 010
011 255
No function
Strobe, slow to fast
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Dimmer Fine 000 255 0–100%
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
The auto programs cannot be edited.

Page 14 of 20
OPERATION
Ovation P-56WW User Manual Rev. 1
Master/Slave
The Master/Slave mode allows a group of Ovation P-56WW products (the slaves) to simultaneously
duplicate the output of another Ovation P-56WW (the master) without a DMX controller.
To set each of the slaves:
1. Go to the Master/Slave main level
2. Select Slave.
To set the master:
1. Go to the Master/Slave main level
2. Select Master.
3. Select a static setting.
Dimmer Profiles
This setting determines how fast the output of the Ovation P-56WW changes when you modify the output value.
This setting provides four different options to simulate the dimming curve of an incandescent lighting product.
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (Off, Dimmer 1, Dimmer 2, or Dimmer 3).
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation P-56WW.
1. Go to the LED Frequency main level.
2. Select PWM Frequency (600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25Khz).
Fan Mode
This setting determines how the fan speed on the Ovation P-56WW is set.
1. Go to the Fan Mode main level
2. Select Auto (fan speed will increase or decrease based on product temperature), Off (fan will
stay off. Product output will decrease based on product temperature), Silent (fan will maintain a
constant silent speed), or On (fan speed will always be at maximum).
Back Light
This setting allows for selection of the amount of time the backlight on the Ovation P-56WW’s display stays
on after the last button is pressed on the control panel.
1. Go to the Back Light main level.
2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (30 seconds).
System Information
This option displays the total number of hours the product has run, the installed software version, and the
product’s UID.
1. Go to the Information main level.
2. Select Fixture Hours, Version, or UID.
Factory Reset
This option restores the Ovation P-56WW to factory default settings.
1. Go to the Reset Factory main level.
2. Select No or Yes.
• The master is the one that runs a program.
• Do not connect a DMX controller to the products configured for Master/Slave operation.
The DMX controller may interfere with signals from the master.
• The master should be the first product in the daisy chain.
Off: The output is proportional (linear) to the dimmer channel value.
Dimmer 1-3: The output follows the dimmer value based on the corresponding dimmer
curve, Dimmer 1 being the fastest.
WARNING: When operating in Fan Mode: Off, the fixture will become hotter to the
touch than when using other fan modes. Use proper protective equipment to prevent
burns. Keep a safe distance from flammable objects.
NOTICE: When operating in Fan Mode: Off, output of the fixture will be reduced and
will not reach the same levels as when using other fan modes.
!

Page 15 of 20
Ovation P-56WW User Manual Rev. 1
TECHNICAL
5. TECHNICAL INFORMATION
Product Maintenance
To maintain optimum performance and minimize wear, clean this product frequently. Usage and
environment are contributing factors in determining the cleaning frequency.
Clean this product at least twice a month. Dust build-up reduces light output performance and can cause
overheating. This can lead to reduced light source life and increased mechanical wear.
To clean the product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.

Page 16 of 20
TECHNICAL SPECIFICATIONS
Ovation P-56WW User Manual Rev. 1
6. TECHNICAL SPECIFICATIONS
Dimensions and Weight
Note: Dimensions in inches rounded to the nearest hundredth.
Power
Light Source
Photometrics
Thermal
DMX
Ordering
Length Width Height Weight
12.48 in (317 mm) 12.83 in (326 mm) 14.0 in (363 mm) 11.6 lb (5.3 kg)
Power Supply Type Range Voltage Selection
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
Parameter 120 V, 60 Hz 230 V, 50 Hz
Consumption 208 W 216 W
Operating Current 1.72 A 0.93 A
Power linking current (products) 13.6 A (7 products) 13.6 A (14 products)
Fuse T 2 A, 250 V T 2 A, 250 V
Power I/O U.S./Canada Worldwide
Power input connector Neutrik® powerCON® A Neutrik® powerCON® A
Power output connector Neutrik® powerCON® B Neutrik® powerCON® B
Power Cord plug Edison (U.S.) Local Plug
Type Power Lifespan
LED 230 W 50,000 hours
Color Quantity Current
Warm White 1 3.2 A
Parameter Narrow Lens Medium Lens Wide Lens
Beam Angle 11° 22° 48°
Field Angle 24° 39° 67°
Illuminance @ 5 m 6,680 lux 2,470 lux 475 lux
Maximum External Temperature Cooling System
113 °F (45 °C) Convection
I/O Connector Channel Range
3- and 5-pin XLR 1, 2, 3, or 6
Product Name Item Code UPC Number
Ovation P-56WW 781462218485 781462218485
UL 1573
CSA C22.2 No. 166
E113093
R

Page 17 of 20
Ovation P-56WW User Manual Rev. 1
TECHNICAL SPECIFICATIONS
Photometrics Chart
D
istance
Beam
Field Field
Lux Lux
1 m
2 m
5 m
10 m
15 m
20 m
25 m
30 m
8 m
Light Source
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m


















 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
¡Beam
Diameter
¡Field
Diameter DiameterDiameter
¡Beam ¡Field
Wide
.FEJVN
D
istance
¡Beam
Diameter
¡Field
Diameter
Wide
.FEJVN
Beam
Field Field
Footcandle DiameterDiameterFootcandle
15 ft
20 ft
30 ft
40 ft
50 ft
75 ft
100 ft
125 ft
150 ft
¡Beam ¡Field
Light Source
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft


















 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft

Page 18 of 20
TECHNICAL SPECIFICATIONS
Ovation P-56WW User Manual Rev. 1
D
istance
¡Beam
Diameter
¡'JFME
Diameter
Beam
Field Field
Footcandle
15 ft
20 ft
30 ft
40 ft
50 ft
75 ft
100 ft
125 ft
150 ft
Light Source
 ft  ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft









 ft
 ft
 ft
 ft
 ft
 ft
 ft
 ft
/BSSPX
D
istance Diameter Diameter
Beam
Field Field
Lux
1 m
2 m
5 m
10 m
15 m
20 m
25 m
30 m
8 m
Light Source
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m
 m









¡Beam ¡'JFME
/BSSPX